... cont.
1Insert a recordable DVD+R(W) with the label side facing up.
2Press TUNER on the remote control to see the TV
programmes, then press 34to select the programme
number you wish to record.
➜If you wish to record from additional device (e.g.Video Cassette
Recorder), press button 34on the remote control to select the
correspond external input channel.
For example, select { EXT2 } if you have connected the VCR to
IN-EXT2 socket at the back of the DVD recorder.
3Press REC MODE to select a desired recording mode. It
defines the picture quality and the maximum recording time
for a disc.
Record
Mode
Picture Quality Maximum Recording
Time per Disc
M1
M2
M2x
M3
M4
M6
M8
High quality (HQ)
DVD quality-Standard Play (SP)
DVD quality-Standard Play Plus (SP+)
S-VHS quality-Long Play (LP)
VHS quality-Extended Play (EP)
VHS quality-Super Long Play (SLP)
VHS quality-Super Extended Play (SEP)
1 hour
2 hours
2.5 hours
3 hours
4 hours
6 hours
8 hours
4Press REC 0to start recording.
●If required, you can press REC 0twice to start a
30-minute recording. Each time you press REC 0button,
you will add 30 minutes to the recording time.
5During recording, you may press PAUSE ;to pause the
recording and press REC 0to continue.
6To stop the recording, press STOP 9.
➜Wait until the message disappears from the display panel before
you remove the disc.
Start manual recording Start Playback
Detailed playback features and additional functions are described in the
accompanying user manual.
4 5
1Insert a disc with the label side facing up.
2Playback will start automatically.
➜If a dialogue appears on the TV showing { Do you want to
access the disc content }, press 34to select {Yes } to show the
disc content or { No } to switch to the last active mode, then press
OK to confirm.
➜If a disc menu appears, press 1234to navigate within the
menu, highlight a title and press OK or PLAY 2to start playback.
NO SOUND! Connect the AUDIO L/R (red/white) sockets at
the back of the DVD recorder to the correspond AUDIO input
sockets on a TV set, stereo system or receiver. Turn on the
connected system and select the appropriate channel.
3To stop playback, press STOP 9.
To watch the TV programmes
1Press TUNER on the remote control, then press 34 to
select the programme number.
To play a DVD+R on other DVD players, you
must finalise it first
1Press EDIT on the remote control.
2Press 34 to select { Finalise } in the menu, then press
OK.
Once a DVD+R is finalised, no further recording or
editing is possible. Unfinalising a DVD+R is not
possible.
1.3
CH-CH+
CH-
CH+
3
4
{ 0 }
1.3
CH-CH+
CH-
CH+
EDIT
1
2
3
4
PLAY
OK
2
SUPER VIDEO