Philips 9000 series User manual

9000 series
S9112
4222_002_5883_1_Booklet Lux_A6_v2.indd 1 13/05/16 10:51

4222_002_5883_1_Booklet Lux_A6_v2.indd 2 13/05/16 10:51

1
2
3
4
5
6
11
12
13
14
15
10
9
8
7
1
4222_002_5883_1_Booklet Lux_A6_v2.indd 3 13/05/16 10:51

1
4222_002_5883_1_Booklet Lux_A6_v2.indd 4 13/05/16 10:51

English 6
Nederlands 31
Русский 57
简体中文 81
 124
4222_002_5883_1_Booklet Lux_A6_v2.indd 5 13/05/16 10:51

English
6
Introduction
Congratulations on your purchase and welcome
to Philips! To fully benet from the support
that Philips oers, register your product at
www.philips.com/welcome.
Please read this user manual, as it contains
information about the features of this shaver as
well as some tips to make shaving easier and
more enjoyable.
General description (Fig.1)
1 Protection cap for cleansing brush attachment
2 Click-on cleansing brush attachment
3 Click-on trimmer attachment
4 Click-on shaving unit
5 On/o button
6 Socket for small plug
7 Exclamation mark
8 Replacement reminder
9 Battery charge indicator
10 Travel lock symbol
11 Cleaning reminder
12 Supply unit
13 Small plug
14 Retaining ring holder
15 Pouch
Important safety information
Read this important information carefully before
you use the appliance and its accessories and save
it for future reference. The accessories supplied
may vary for dierent products.
4222_002_5883_1_Booklet Lux_A6_v2.indd 6 13/05/16 10:51

English 7
Danger
-Keep the supply unit dry.
Warning
-To charge the battery, only
use the detachable supply unit
(type HQ8505) provided with
the appliance.
-The supply unit contains a
transformer. Do not cut o the
supply unit to replace it with
another plug, as this causes a
hazardous situation.
-This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
4222_002_5883_1_Booklet Lux_A6_v2.indd 7 13/05/16 10:51

English
8
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
-Always unplug the shaver
before you clean it under
the tap.
-Always check the appliance
before you use it. Do not use
the appliance if it is damaged,
as this may cause injury.
Always replace a damaged part
with one of the original type.
-Do not open the appliance
to replace the rechargeable
battery.
4222_002_5883_1_Booklet Lux_A6_v2.indd 8 13/05/16 10:51

English 9
Caution
-Never immerse the cleaning
system or the charging stand in
water and do not rinse it under
the tap.
-Never use water hotter than
80°C to rinse the shaver.
-Only use this appliance for its
intended purpose as shown in
the user manual.
-For hygienic reasons, the
appliance should only be used
by one person.
-Never use compressed air,
scouring pads, abrasive
cleaning agents or aggressive
liquids such as petrol or
acetone to clean the appliance.
4222_002_5883_1_Booklet Lux_A6_v2.indd 9 13/05/16 10:51

English
10
-If your shaver comes with a
cleaning system, always use the
original Philips cleaning uid
(cartridge or bottle, depending
on the type of cleaning system).
-Always place the cleaning
system on a stable, level and
horizontal surface to prevent
leakage.
-If your cleaning system uses a
cleaning cartridge, always make
sure the cartridge compartment
is closed before you use the
cleaning system to clean or
charge the shaver.
-When the cleaning system is
ready for use, do not move it
to prevent leakage of cleaning
uid.
4222_002_5883_1_Booklet Lux_A6_v2.indd 10 13/05/16 10:51

English 11
-Water may drip from the socket
at the bottom of the shaver
when you rinse it. This is normal
and not dangerous because
all electronics are enclosed in
a sealed power unit inside the
shaver.
-Do not use the supply unit in or
near wall sockets that contain
an electric air freshener to
prevent irreparable damage to
the supply unit.
Electromagnetic elds (EMF)
-This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic elds.
General
-This shaver is waterproof. It is suitable for use
in the bath or shower and for cleaning under
the tap. For safety reasons, the shaver can
therefore only be used without cord.
-The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
-The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
4222_002_5883_1_Booklet Lux_A6_v2.indd 11 13/05/16 10:51

English
12
The display
Note: Before you use the shaver for the rst time,
remove the protective foil from the display.
Charging
Quick charge: When you connect the shaver to
the wall socket, the lights of the battery charge
indicator light up one after another repeatedly.
When the shaver contains enough energy for
one shave, the bottom light of the battery charge
indicator starts to ash slowly.
While the shaver continues to charge, rst the
bottom light of the battery charge indicator ashes
and then lights up continuously. Then the second
light ashes and lights up continuously, and so on
until the shaver is fully charged (see 'Battery fully
charged').
Battery fully charged
When the battery is fully charged, all lights
of the battery charge indicator light up white
continuously.
Note: This appliance can only be used without
cord. When you press the on/o button during or
after charging, you hear a sound to indicate that
the shaver is still connected to th e wall socket.
Note: When the battery is full, the display switches
o automatically after 30 minutes.
4222_002_5883_1_Booklet Lux_A6_v2.indd 12 13/05/16 10:51

English 13
Battery low
When the battery is almost empty, the bottom light
of the battery charge indicator ashes orange and
you hear a sound.
Remaining battery charge
The remaining battery charge is shown by the
lights of the battery charge indicator that light up
continuously.
Cleaning reminder
Clean the shaver after every shave for optimal
performance. When you switch o the appliance,
the cleaning reminder ashes to remind you to
clean the appliance.
Travel lock
You can lock the appliance when you are going to
travel. The travel lock prevents the appliance from
being switched on by accident.
Activating the travel lock
1 Press the on/o button for 3 seconds to enter
the travel lock mode.
4222_002_5883_1_Booklet Lux_A6_v2.indd 13 13/05/16 10:51

English
14
While you activate the travel lock, the travel
lock symbol lights up white continuously.
When the travel lock is activated, the appliance
produces a sound and the travel lock symbol
ashes.
Deactivating the travel lock
1 Press the on/o button for 3 seconds.
The travel lock symbol ashes and then lights
up continuously. The appliance is now ready for
use again.
Note: You can also deactivate the travel lock by
connecting the appliance to the wall socket.
Replacement reminder
For maximum shaving performance, we advise you
to replace the shaving heads every two years.
The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The shaving unit symbol lights up
white continuously, the arrows ash white and
the appliance beeps to indicate that you have to
replace the shaving heads.
Note: After replacing the shaving heads, you need
to reset the replacement reminder by pressing the
on/o button for 7 seconds.
Exclamation mark
Overheating
If the appliance overheats during charging, the
exclamation mark ashes orange. When this
happens, the shaver switches o automatically.
Charging continues once the temperature of the
appliance has decreased to the normal level.
4222_002_5883_1_Booklet Lux_A6_v2.indd 14 13/05/16 10:51

English 15
Blocked shaving heads
If the shaving heads are blocked, the exclamation
mark lights up orange continuously. The
replacement reminder and the cleaning reminder
ash white alternately and you hear a sound.
In this case, the motor cannot run because the
shaving heads are soiled or damaged.
If the shaving heads are soiled, you have to clean
them. If the shaving heads are damaged, you have
to replace them.
Charging
Charge the shaver before you use it for the rst
time and when the display indicates that the
battery is almost empty. The battery charge is
indicated by the lights of the battery charge
indicator on the display.
When you connect the shaver to the wall socket,
you hear a sound.
Charging takes approx. 1 hour. A fully charged
shaver has a shaving time of up to 50 minutes.
Note: You cannot use the appliance while it is
charging.
Charging with the supply unit
1 Make sure the appliance is switched o.
2 Put the supply unit in the wall socket and put
the small plug in the appliance.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1
2
4222_002_5883_1_Booklet Lux_A6_v2.indd 15 13/05/16 10:51

English
16
Using the appliance
Note: This appliance can only be used without
cord.
Switching the appliance on and o
-To switch on the appliance, press the on/o
button once.
The display lights up for a few seconds.
-To switch o the appliance, press the on/o
button once.
The display lights up for a few seconds and
shows the remaining battery charge.
Shaving
Skin adaptation period
Your rst shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system. To allow
your skin to adapt to this new appliance, we advise
you to shave regularly (at least 3 times a week)
and exclusively with this appliance for a period
of 3 weeks.
Shaving tips
-To ensure the best result, we advise you to
pre-trim your beard if you have not shaved for
3 days or longer.
-Move the shaving heads over your skin in
circular movements.
4222_002_5883_1_Booklet Lux_A6_v2.indd 16 13/05/16 10:51

English 17
Dry shaving
1 Switch on the appliance.
The display lights up for a few seconds.
2 Move the shaving heads over your skin in
circular movements.
Note: Circular movements provide better
shaving results than straight movements.
3 Clean the appliance after use (see 'Cleaning
and maintenance').
Wet shaving
You can also use this appliance on a wet face with
shaving foam or shaving gel.
To shave with shaving foam or shaving gel,
follow the steps below:
1 Apply some water to your skin.
2 Apply shaving foam or shaving gel to your skin.
3 Rinse the shaving unit under the tap to ensure
that the shaving unit glides smoothly over
your skin.
4 Switch on the appliance.
4222_002_5883_1_Booklet Lux_A6_v2.indd 17 13/05/16 10:51

English
18
5 Move the shaving heads over your skin in
circular movements.
Note: Rinse the shaving unit regularly to ensure
that it continues to glide smoothly over your
skin.
6 Dry your face.
7 Clean the appliance after use (see 'Cleaning
and maintenance').
Note: Make sure you rinse all foam or shaving
gel o the appliance.
Using the click-on attachments
Note: The accessories supplied may vary for
dierent products. The box shows the accessories
that have been supplied with your appliance.
Removing or attaching the click-on
attachments
1 Make sure the appliance is switched o.
2 Pull the attachment straight o the appliance.
Note: Do not twist the attachment while you
pull it o the appliance.
4222_002_5883_1_Booklet Lux_A6_v2.indd 18 13/05/16 10:52

English 19
3 Insert the lug of the attachment into the slot in
the top of the appliance. Then press down the
attachment to attach it to the appliance (‘click’).
Using the trimmer attachment
You can use the trimmer attachment to groom
your sideburns and moustache.
1 Attach the attachment to the appliance (‘click’).
2 Switch on the appliance.
The display lights up for a few seconds.
3 Hold the trimmer attachment perpendicular to
the skin and move the appliance downwards
while you exert gentle pressure.
4 Clean the attachment after use (see 'Cleaning
and maintenance').
Using the cleansing brush attachment
Use the rotating cleansing brush attachment with
your daily cleansing cream. The cleansing brush
attachment removes oil and dirt, contributing to a
healthy and oil-free skin.
1 Attach the attachment to the appliance ('click').
2 Moisten the attachment with water.
Note: Do not use the appliance with a dry brush
attachment, as this can irritate the skin.
4222_002_5883_1_Booklet Lux_A6_v2.indd 19 13/05/16 10:52

English
20
3 Moisten your face with water and apply a
cleanser to your face.
4 Place the attachment on your cheek.
5 Switch on the appliance.
6 Gently move the attachment across your skin
from the nose towards the ear. Do not push the
attachment too hard onto the skin to make sure
the treatment remains comfortable.
Note: Do not cleanse the sensitive area around
your eyes.
7 After approx. 20 seconds move the appliance
to your other cheek and start cleansing this part
of your face.
8 After approx. 20 seconds move the appliance
to your forehead and start cleansing this part
of your face. Gently move the brush head from
left to right.
Note: We advise you to not overdo the
cleansing and to not cleanse any zone longer
than 20 seconds.
9 After the treatment, rinse and dry your face.
Your face is now ready for the next step of your
daily skincare routine.
10 Clean the attachment after use (see 'Cleaning
and maintenance').
20 sec.
20 sec.
20 sec.
4222_002_5883_1_Booklet Lux_A6_v2.indd 20 13/05/16 10:52