Philips AT7 SERIES User manual

Always here to help you
Register your product and get support at
www.philips.com/welcome
AT9X X
AT8X X
AT 7X X

1

AT9x x, AT8x x, AT7x x
ENGLISH 4
INDONESIA 17
한국어 31
BAHASA MELAYU 44
ภาษาไทย 58
TIẾNG VIỆT 71
繁體中文 84
简体中文 97
121
133

4
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet from
the support that Philips offers, register your product at www.philips.com/
welcome.
Please read this user manual, as it contains information about the wonderful
features of this shaver as well as some tips to make shaving easier
and more enjoyable.
General description (Fig. 1)
1 Protection cap
2 Shaving unit
3 Shaving unit release button
4 Shaver on/off button (AT899/AT896/AT894/AT892/AT891/AT890/
AT811/AT790/AT756/AT753/AT751/AT750 only)
5 Shaving head symbol
6 Charging light (AT899/AT896/AT894/AT892/AT891/AT890/AT811/
AT790/AT756/AT753/AT751/AT750 only)
7 Charging stand (AT941/AT940 only)
8 Adapter
9 Cleaning brush
10 Storage pouch (AT941/AT940/AT897/AT894/AT891/AT890/AT796/
AT790 only)
11 Battery symbol and shaving head symbol (AT941/AT940/AT897 only)
12 Shaver on/off button (AT941/AT940/AT897 only)
13 Trimmer release slide (AT941/AT940/AT918/AT897/AT896/AT894/
AT891/AT890/AT889/AT887/AT886/AT872/AT811/AT799/AT797/
AT796/AT790/AT756 only)
14 Trimmer (AT941/AT940/AT918/AT897/AT896/AT894/AT891/AT890/
AT889/AT887/AT886/AT872/AT811/AT799/AT797/AT796/AT790/
AT756 only)
Note: You can nd the type number on the back of the shaver.
Important safety information
Read this important information carefully before you use the appliance and
its accessories and save it for future reference.The accessories supplied
may vary for different products.
Danger
- Keep the adapter dry.
Warning
- The adapter contains a transformer. Do not cut off the adapter to
replace it with another plug, as this causes a hazardous situation.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
- Always unplug the shaver before you clean it under the tap.
- Always check the appliance and its accessories before you use it. Do not
use the appliance or its accessories if it is damaged, as this may cause
injury. Always replace a damaged part with one of the original type.
ENGLISH

Caution
- Never immerse the charging stand in water nor rinse it under the tap.
- Only use this appliance for its intended purpose as shown in the user
manual.
- For hygienic reasons, the appliance should only be used by one person.
- Do not use the adapter in or near wall sockets that contain or have
contained an electric air freshener to prevent irreparable damage to
the adapter.
- Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
- Water may drip from the socket at the bottom of the shaver when
you rinse it.This is normal and not dangerous because all electronics
are enclosed in a sealed power unit inside the shaver.
Electromagnetic elds (EMF)
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic elds.
General
- This shaver is waterproof. It is suitable for use in the bath or shower
and for cleaning under the tap. For safety reasons, the shaver can
therefore only be used without cord.
- The appliance is suitable for mains voltages ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less than
24 volts.
Charging
Note: The shaver cannot be used directly from the mains.
When you charge the shaver for the rst time or after a long period of
disuse, let it charge until the charging light lights up continuously.
See the table below for the charging time of your shaver.
Charging time 1 hour 8 hours
AT941, AT940, AT918
AT897, AT896, AT894
AT892, AT891, AT890
AT889, AT887, AT886
AT899, AT896, AT872,
AT799, AT797, AT796,
AT790, AT770, AT756,
AT753, AT751, AT750
AT811
The shaving time may be less than stated below in the table as a result of
your shaving behaviour, your cleanings habits or your beard type.
Shaving
minutes
60 min. 50 min. 45 min. 40 min.
AT941 AT899 AT790, AT756,
AT753
AT940
AT897, AT894, AT892
AT891, AT890, AT811,
AT799
AT896 AT751, AT750
ENGLISH 5

Charge indications
Battery low
- AT941/AT940/AT897:When the battery is almost empty (when there
are only 5 or fewer shaving minutes left), the orange battery symbol
starts to ash. When you switch off the shaver, the orange battery
symbol continues to ash for a few seconds.
- AT899, AT896, AT918, AT896, AT894, AT891, AT890, AT889, AT887,
AT886, AT872, AT811, AT799, AT797, AT796, AT790, AT770,
AT756,AT753, AT751, AT750:When the battery is almost empty
(when there are only 5 or fewer shaving minutes left), the charging
light starts to flash orange.When you switch off the shaver, the
charging light continues to flash orange for a few seconds.
Quick charging (AT941,AT940,AT918,AT 897,AT896,AT894,
AT891,AT890,AT889,AT887,AT886,AT811 only)
- AT941/AT940/AT897:When you start charging the empty battery,
the battery symbol ashes orange and white.
Note: When the battery symbol ashes white and orange towards only white,
you can have a quick shave of three minutes.
- AT918, AT896, AT894, AT891, AT890, AT889, AT887, AT886, AT811:
When you start charging the empty battery, the charging light
alternately ashes orange and green.
Note: When the charging light ashes orange and green towards only green,
you can have a quick shave of three minutes.
ENGLISH6

Charging
- AT941/AT940/AT897:When the shaver is charging, the white battery
symbol ashes.
- AT899, AT896, AT872, AT799, AT797, AT796, AT790, AT770,
AT756,AT753, AT751, AT750:
When the shaver is charging, the charging light lashes green.
Battery fully charged
- AT941/AT940/AT897:When the battery is fully charged, the white
battery symbol lights up continuously.
Note: After approx. 30 minutes, the battery symbol goes out to save energy.
- AT899, AT896, AT918, AT896, AT894, AT891, AT890, AT889, AT887,
AT886, AT872, AT811, AT799, AT797, AT796, AT790, AT770,
AT756,AT753, AT751, AT750:When the battery is fully charged,
the charging light lights up green continuously.
Note: After approx. 30 minutes, the charging light goes out to save energy.
Charging
1 Put the small plug in the shaver.
2 Put the adapter in the wall socket.
,The charging light shows the charging status of the shaver
(see section ‘Charge indications’ in this chapter).
Charging in the charging stand (AT941/AT940 only)
1 Put the small plug in the charging stand.
2 Put the adapter in the wall socket.
ENGLISH 7

3 Place the shaver in the charging stand.
,The charging light shows the charging status of the shaver (see
section ‘Charge indications’ in this chapter).
Using the shaver
Note: This shaver can be used in the bath or shower. It can therefore not be
used directly from the mains for safety reasons.
Shaving tips and tricks
- This shaver is suitable for both wet and dry use. Use the shaver with
shaving gel or foam for extra skin comfort, or use the shaver dry for
extra convenience.
Note: We advise you to use the shaver with shaving gel or foam when you
use it for a wet shave. Do not use thick shaving cream or shaving oil with this
shaver.
- For optimal shaving results, make circular movements during use.
- The shaver is waterproof and can be used in the bath or shower.
- Your skin may need 2 or 3 weeks to get accustomed to the Philips
shaving system.
Wet shaving
1 Apply some water to your skin.
2 Apply shaving foam or shaving gel to your skin.
3 Rinse the shaving unit under the tap to ensure that the shaving unit
glides smoothly over your skin.
4 Press the on/off button once to switch on the shaver.
5 Move the shaving heads in circular movements over your skin.
ENGLISH8

Note: Rinse the shaver under the tap regularly to ensure that it continues to
glide smoothly over your skin.
6 After shaving, press the on/off button once to switch off the shaver
and dry your face.
7 Clean the shaver (see chapter ‘Cleaning and maintenance’).
Note: Make sure you rinse all foam or shaving gel off the shaver.
Dry shaving
1 Press the on/off button once to switch on the shaver.
2 Move the shaving heads in circular movements over your skin.
3 After shaving, press the on/off button once to switch off the shaver.
4 Clean the shaver (see chapter ‘Cleaning and maintenance’).
Trimming (AT941/AT940/AT918/AT897/AT896/AT894/AT891/
AT890/AT889/AT887/AT886/AT872/AT811/AT799/AT797/AT796/
AT790/AT756 only)
You can use the trimmer to groom your sideburns and moustache.
1 Push the trimmer slide downwards to open the trimmer.
2 Press the on/off button once to switch on the shaver.
,You can now start trimming.
3 After trimming, press the on/off button once to switch off the shaver.
4 Clean the trimmer (see chapter ‘Cleaning and maintenance’).
ENGLISH 9

5 Close the trimmer (‘click’).
Cleaning and maintenance
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the shaver and the
charging stand (AT941/AT940 only).
Always unplug the shaver before you clean it under the tap.
- Clean the shaver after every shave for optimal shaving performance.
- Regular cleaning guarantees better shaving performance.
- For the best cleaning results, we advise you to use the Philips Cleaning
spray (HQ110).
- Be careful with hot water. Always check if the water is not too hot, to
prevent your hands from getting burnt.
Note: Water may leak from the socket at the bottom of the shaver when you
rinse it. This is normal and not dangerous because all electronics are enclosed
in a sealed power unit inside the shaver.
Cleaning the shaving unit under the tap
1 Switch off the shaver.
2 Press the release button to open the shaving unit.
3 Rinse the shaving unit and hair chamber under a hot tap for
30 seconds.
Be careful with hot water.Always check if the water is not too hot,
to prevent your hands from getting burnt.
- Rinse the hair chamber and the inside of the shaving unit.
ENGLISH10

- Rinse the outside of the shaving unit.
4 Close the shaving unit and shake off excess water.
Be careful not to hit the shaving unit against anything while shaking off
excess water.
Never dry the shaving unit and the hair chamber with a towel or tissue,
as this may damage the shaving unit.
5 Open the shaving unit again and leave it open to let the shaver dry
completely.
Cleaning the shaving unit with the cleaning brush
1 Switch off the shaver.
2 Press the release button to open the shaving unit.
3 Pull the shaving unit off the shaver.
4 Turn the lock anticlockwise (A) and remove the retaining frame (B).
5 Remove and clean one shaving head at a time. Each shaving head
consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is restored.
- Remove the cutter from the shaving guard and clean it with the brush.
ENGLISH 11

- Clean the inside and outside of the shaving guard with the brush.
6 Put the shaving heads back into the shaving unit.
Make sure that the projections of the shaving heads t exactly into the
recesses.
7 Put the retaining frame back into the shaving unit (A) and turn the
lock clockwise (B).
8 Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
ENGLISH12

Cleaning the trimmer with the cleaning brush (AT941/AT940/AT918/
AT897/AT896/AT894/AT891/AT890/AT889/AT887/AT886/AT872/
AT811/AT799/AT797/AT796/AT790/AT756 only)
Clean the trimmer every time you have used it.
1 Switch off the shaver.
2 Push the trimmer slide downwards to open the trimmer.
3 Clean the trimmer with the short-bristled side of the cleaning brush.
Brush up and down along the trimmer teeth.
4 Close the trimmer (‘click’).
Tip: For optimal trimming performance, lubricate the trimmer teeth with a drop
of sewing machine oil every six months.
Storage
- Put the protection cap on the shaver to prevent damage.
- AT941/AT940/AT897/AT894/AT892/AT891/AT890/AT796/AT790 only:
Store the shaver in the pouch supplied.
ENGLISH 13

Replacement
Replacement reminder
The shaving head symbol will light up to indicate that the shaving heads
need to be replaced. Replace damaged shaving heads right away.
Only replace the shaving heads with original HQ9 (AT941/AT940/AT918)
or HQ8 (AT897/AT896/AT894/AT891/AT890/AT889/AT887/AT886/
AT872/AT811/AT797/AT796/AT790/AT770/AT756/AT753/AT751/AT750)
Philips Shaving Heads.
1 The shaving head symbol lights up orange continuously.
2 Switch off the shaver. Disconnect the shaver from the mains or
remove it from the charging stand (AT941/AT940 only).
3 Press the release button to open the shaving unit.
4 Pull the shaving unit off the shaver.
5 Turn the lock anticlockwise (A) and remove the retaining frame (B).
6 Remove the shaving heads and place new ones in the shaving unit.
Make sure that the projections of the shaving heads t exactly into the
recesses.
7 Put the retaining frame back into the shaving unit (A)and turn the
lock clockwise (B).
ENGLISH14

8 Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
9 Press and hold the on/off button for 5 seconds to reset the
replacement reminder on the shaver.The orange light will go out.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer.You can also contact the Philips Consumer
Care Centre in your country (see the worldwide guarantee leaet for
contact details).
To retain the top performance of your shaver, make sure you clean it
regularly and replace its shaving heads at the recommended time.
Shaving heads
- We advise you to replace your shaving heads every two years. Always
replace with HQ9 (AT941/AT940) or HQ8(AT897/AT896/
AT894/AT891/AT890/AT889/AT887/AT886/AT872/AT811/
AT799/AT797/AT796/AT790/AT770/AT756/AT753/AT751/
AT750) Philips Shaving Heads.
Cleaning
- Use Cleaning spray (HQ110) to clean the shaving heads thoroughly.
Recycling
Do not throw away the appliance with the normal household waste at the
end of its life, but hand it in at an ofcial collection point for recycling.
By doing this, you help to preserve the environment.
Removing the rechargeable shaver battery
Only remove the rechargeable battery when you discard the shaver.
Make sure the rechargeable battery is completely empty when you
remove it.
1 Undo the screws in the back of the shaver and in the hair chamber.
2 Remove the front panel and the back panel.
ENGLISH 15

3 Bend the 6 hooks aside and take out the power unit.
Be careful, the hooks are sharp.
4 Remove the rechargeable battery.
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaet.
Guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms of
the international guarantee because they are subject to wear.
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in your
country.
Problem Possible cause Solution
The shaver does not
shave as well as it used
to.
The shaving heads are damaged
or worn.
Replace the shaving heads (see chapter
‘Replacement’).
Foam or gel residues clog up
the shaving heads.
Rinse the shaving unit under a hot tap
(see chapter ‘Cleaning and maintenance’).
Long hairs obstruct the shaving
heads.
Clean the shaving heads one by one
(see chapter ‘Cleaning and maintenance’).
You have not inserted the
shaving heads properly.
Make sure that the projections of the
shaving heads t exactly into the recesses
(see chapter ‘Cleaning and maintenance’).
The shaver does not
work when I press the
on/off button.
The rechargeable battery is
empty.
Recharge the battery (see chapter
‘Charging’).
The temperature of the shaver
is too high. In this case, the
shaver does not work.
As soon as the temperature of the shaver
has dropped sufciently, you can switch on
the shaver again.
The shaver does not
work, although it is
connected to the
mains.
The shaver is not designed to
be used directly from the mains.
Recharge the battery (see chapter
‘Charging’) and disconnect it from the mains.
ENGLISH16

17
Pendahuluan
Selamat atas pembelian Anda dan selamat datang di Philips! Untuk
memanfaatkan sepenuhnya dukungan yang ditawarkan Philips, daftarkan
produk Anda di www.philips.com/welcome.
Baca petunjuk pengguna ini yang berisi informasi mengenai berbagai tur
menarik serta sejumlah saran agar lebih mudah dan menyenangkan dalam
menggunakan alat cukur ini.
Gambaran umum (Gbr. 1)
1 Tutup pelindung
2 Unit cukur
3 Tombol pelepas unit cukur
4 Tombol on/off alat cukur (hanya AT899/AT896/AT894/AT892/AT891/
AT890/AT811/AT790/AT756/AT753/AT751/AT750)
5 Simbol alat cukur
6 Lampu pengisian daya (hanya AT899/AT896/AT894/AT892/AT891/
AT890/AT811/AT790/AT756/AT753/AT751/AT750)
7 Dudukan pengisi baterai (hanya AT941/AT940)
8 Adaptor
9 Sikat pembersih
10 Kantung penyimpan (hanya AT941/AT940/AT897/AT894/AT891/
AT890/AT796/AT790)
11 Simbol baterai dan simbol alat kepala cukur (hanya AT941/AT940/AT897)
12 Tombol on/off alat cukur (hanya AT941/AT940/AT897)
13 Tombol geser pelepas pemangkas (hanya AT941/AT940/AT918/AT897/
AT896/AT894/AT891/AT890/AT889/AT887/AT886/AT872/AT811/
AT799/AT797/AT796/AT790/AT756)
14 Pemangkas (hanya AT941/AT940/AT918/AT897/AT896/AT894/AT891/
AT890/AT889/AT887/AT886/AT872/AT811/AT799/AT797/AT796/
AT790/AT756)
Catatan: Anda bisa menemukan nomor tipe pada bagian belakang alat cukur.
Informasi keselamatan penting
Baca informasi penting ini dengan saksama sebelum Anda menggunakan alat
dan aksesorinya, dan simpanlah untuk acuan bila sewaktu-waktu diperlukan.
Aksesori yang disertakan untuk setiap jenis produk bisa berbeda-beda.
Bahaya
- Jaga adaptor agar tetap kering.
Peringatan
- Adaptor berisi trafo. Jangan memotong adaptor dan menggantinya
dengan steker lain, karena dapat membahayakan.
- Alat ini tidak dimaksudkan untuk digunakan oleh orang (termasuk anak-
anak) dengan cacat sik, indera atau kecakapan mental yang kurang,
atau kurang pengalaman dan pengetahuan, kecuali jika mereka diberikan
pengawasan atau petunjuk mengenai penggunaan alat oleh orang yang
bertanggung jawab bagi keselamatan mereka.
- Anak kecil harus diawasi untuk memastikan mereka tidak bermain-main
dengan alat ini.
- Selalu mencabut steker dari pencukur sebelum membersihkannya di
bawah keran.
INDONESIA

- Selalu periksa alat dan aksesori sebelum digunakan. Jangan gunakan alat
dan aksesori bila rusak, karena dapat menyebabkan cedera. Selalu ganti
komponen yang rusak dengan tipe yang asli.
Perhatian
- Jangan merendam dudukan pengisi baterai dalam air maupun
membersihkannya di bawah keran air.
- Hanya gunakan alat ini untuk keperluan yang dimaksud di petunjuk
pengguna.
- Untuk alasan higienis, alat sebaiknya hanya digunakan oleh satu orang saja.
- Jangan gunakan adaptor di dalam atau di dekat stopkontak dinding
yang sedang digunakan, atau pernah digunakan, dengan penyegar udara
elektrik untuk mencegah kerusakan permanen pada adaptor.
- Jangan sekali-kali menggunakan udara bertekanan, sabut gosok, bahan
pembersih abrasif atau cairan agresif seperti bensin atau aseton untuk
membersihkan alat.
- Air mungkin menetes keluar dari soket di bagian bawah alat cukur saat
Anda membilasnya. Hal ini normal dan tidak berbahaya karena semua
komponen elektronik tersimpan dalam unit daya yang tertutup rapat
dalam alat cukur.
Medan elektromagnet (EMF)
- Alat Philips ini mematuhi semua standar dan peraturan yang berlaku
terkait paparan terhadap medan elektromagnet.
Umum
- Alat cukur ini tahan air. Cocok untuk penggunaan di bak mandi atau di
bawah pancuran dan dapat dibersihkan di bawah keran. Demi alasan
keselamatan, alat cukur hanya dapat digunakan tanpa kabel.
- Alat ini cocok untuk tegangan listrik berkisaran 100 hingga 240 volt.
- Adaptor mengubah tegangan 100-240 volt menjadi tegangan rendah
yang aman di bawah 24 volt.
Pengisian daya
Catatan: Alat cukur tidak dapat digunakan secara langsung dari stopkontak
listrik.
Apabila Anda mengisi daya alat cukur untuk pertama kali atau setelah lama
tidak digunakan, biarkan daya diisi hingga lampu pengisian daya menyala
terus-menerus.
Lihat tabel berikut untuk waktu pengisian daya alat cukur Anda.
Waktu pengisian 1 jam 8 jam
AT941, AT940, AT918
AT897, AT896, AT894
AT892, AT891, AT890
AT889, AT887, AT886
AT899, AT896, AT872
AT799, AT797, AT796,
AT790, AT770, AT756,
AT753, AT751, AT750
AT811
INDONESIA18

Waktu bercukur mungkin kurang dari yang tertulis di tabel di bawah ini,
tergantung cara Anda mencukur, kebiasaan Anda membersihkan atau jenis
cambang Anda.
Menit
bercukur
60 menit 50 menit 45 menit 40 menit
AT941 AT899 AT790, AT756,
AT753
AT940
AT897, AT894, AT892
AT891, AT890, AT811,
AT799
AT896 AT751, AT750
Indikator daya
Baterai tinggal sedikit
- AT941/AT940/AT897: Apabila baterai hampir kosong (hanya bisa
digunakan untuk pencukuran selama 5 menit atau kurang), simbol
steker berwarna jingga mulai berkedip. Apabila Anda mematikan alat
cukur, simbol baterai jingga akan terus berkedip selama beberapa detik.
- AT899, AT896, AT918, AT896, AT894, AT891, AT890, AT889, AT887,
AT886, AT872, AT811, AT799, AT797, AT796, AT790, AT770,
AT756,AT753, AT751, AT750: Saat baterai hampir habis (hanya bisa
digunakan untuk pencukuran selama 5 menit atau kurang), lampu
pengisian daya akan mulai berkedip jingga. Apabila Anda mematikan
pencukur, lampu pengisian daya akan terus berkedip jingga selama
beberapa detik.
Pengisian daya cepat (hanya AT941,AT940,AT918,AT897,
AT896,AT894,AT891,AT890,AT889,AT887,AT886,AT811)
- AT941/AT940/AT897: Apabila Anda mulai mengisi daya baterai yang
kosong, simbol baterai berkedip jingga dan putih.
Catatan: Bila simbol baterai berkedip putih dan jingga lalu menjadi putih saja,
Anda punya waktu sekitar tiga menit untuk bercukur cepat.
INDONESIA 19

- AT918, AT896, AT894, AT891, AT890, AT889, AT887, AT886, AT811:
Saat Anda mulai mengisi daya baterai yang kosong, lampu pengisian
daya baterai akan berkedip jingga dan hijau secara bergantian.
Catatan: Bila lampu pengisi daya berkedip jingga dan hijau lalu menjadi hijau
saja, Anda punya waktu sekitar tiga menit untuk bercukur cepat.
Pengisian daya
- AT941/AT940/AT897: Ketika alat cukur sedang diisi daya, simbol baterai
putih berkedip.
- AT899, AT896, AT872, AT799, AT797, AT796, AT790, AT770,
AT756,AT753, AT751, AT750:
Saat alat cukur sedang diisi daya, lampu pengisian daya akan berkedip
hijau.
Baterai terisi penuh
- AT941/AT940/AT897: Saat baterai terisi penuh, simbol baterai putih
menyala secara terus-menerus.
Catatan: Setelah sekitar 30 menit, simbol baterai akan padam untuk
menghemat energi.
- AT899, AT896, AT918, AT896, AT894, AT891, AT890, AT889, AT887,
AT886, AT872, AT811, AT799, AT797, AT796, AT790, AT770,
AT756,AT753, AT751, AT750:Apabila baterai terisi penuh, lampu
pengisian daya akan terus menyala hijau.
Catatan: Setelah sekitar 30 menit, lampu pengisian daya akan padam untuk
menghemat energi.
INDONESIA20