Philips HP6459 Satin ICE Optima User manual

ENGLISH 6
POLSKI 18
ROMÂNĂ 30
РУССКИЙ 42
ČESKY 56
MAGYAR 67
SLOVENSKY 79
УКРАЇНСЬКА 91
HRVATSKI 104
EESTI 115
LATVISKI 126
LIETUVIŠKAI 138
SLOVENŠČINA 149
БЪЛГАРСКИ 160
SRPSKI 173
HP6459, HP6457, HP6455, HP6453
5

Introduction
◗With your new Satinxice optima you can
remove unwanted hairs quickly, easily and
effectively.The combination of the proven
epilating disc system with the newly
developed skin cooler constitutes a revolution
in epilation.Thanks to the natural numbing
effect of ice on the skin, the new Satinxice
optima makes epilation more comfortable and
less painful than ever.The result is a silky-
smooth skin and a hair growth reduction of
up to 50 percent, assuming you use the
appliance regularly (every 4 weeks).
◗The Satinxice optima is particularly suitable
for the legs.Types HP6459 and HP6457 also
come with a skin cooler that has been
specially developed for epilating sensitive
areas (underarms, bikini line).These areas are
particularly sensitive to pain, which this special
skin cooler helps to diminish.
◗The rapidly rotating epilating discs catch even
the shortest hairs (up to half a millimetre!)
and pull them out by the roots.As a result,
your skin stays smooth for up to four weeks
and regrowth is soft and downy.
Important
◗Check if the mains voltage indicated on the
adapter plug corresponds to the local mains
voltage before you connect the appliance.
The appliance is suitable for 220-240V/50-
60Hz/5W.
ENGLISH6

◗Only use the appliance in combination with
the adapter plug supplied.
◗Make sure the appliance and the adapter plug
do not come into contact with water.
◗Keep the appliance out of the reach of
children.
◗To prevent damage and injuries, keep the
running appliance away from your hair,
eyebrows, eyelashes, clothes, threads, cords,
brushes etc.
◗If the adapter plug of this appliance is
damaged, it may only be replaced with an
adapter plug of the original type.Turn to your
Philips dealer or the Philips Customer Care
Centre in your country for replacement.
◗Do not expose the appliance to temperatures
lower than 5cC or higher than 35cC.
◗Do not use the appliance on irritated skin or
skin with varicose veins, rashes, spots, moles
(with hairs) or wounds without consulting
your doctor first. People with a reduced
immune response, e.g. during pregnancy, or
people suffering from diabetes mellitus,
Raynaud's disease or immunodeficiency
should also consult their doctor first.
◗Noiselevel: L= 75.8 dB(A) re 1pW
ENGLISH 7

General description
AProtective sleeve
BLeg skin cooler
CUnderarm skin cooler
DProtective cap of epilating head
EEpilating head
FProtective cap of peeling head
GPeeling head
HProtective cap of shaving head
IShaving head
JAppliance
KAdapter plug
Freezing the skin cooler
C1Remove the protective sleeve from the
skin cooler.
C2Put the skin cooler without the protective
sleeve in the freezer cassette and put it in
the freezer or freezing compartment (***)
at least 6 hours before you start epilating.
Make sure the outside of the skin cooler is
completely dry before you freeze it.
◗Tip:You can store the skin cooler in the
freezer permanently.
ENGLISH8

General information about epilation
◗Epilation can lead to ingrown hairs or minor
skin injuries, which may cause inflammations
due to penetration of bacteria into the skin. It
is therefore important to clean the epilating
head very carefully before each use.
◗Epilation is easier just after taking a bath or
shower. Make sure your skin is completely dry
when you start epilating.
◗When you use the appliance for the first time,
we advise you to try it out on an area with
only light hair growth to get accustomed to
the epilation process.After epilation you can
apply a mild cream or body milk to soothe
your skin and reduce skin irritation.
◗We advise you to epilate before goint to bed
at night, as this will allow any skin irritation
that may develop to diminish overnight.
◗Your skin may become a little red and
irritated the first few times you use the
epilator.This phenomenon is absolutely
normal and will quickly disappear.As you use
the appliance more often, your skin will get
used to epilation, skin irritation will decrease
and regrowth will become thinner and softer.
If the irritation has not disappeared within
three days, we advise you to consult a doctor.
◗Using the peeling head regularly improves the
appearance of the skin and reduces the risk of
ingrown hairs. Do not use the peeling head
immediately before or after epilation.
ENGLISH 9

Epilating the legs
Make sure your skin is clean, entirely dry and free
from grease. Do not use any cream before you
start epilating.
C1Snap the protective sleeve onto the skin
cooler.
The protective sleeve prevents an unpleasant
sensation of coldness in your hand while using the
appliance.
C2Snap the appliance onto the skin cooler.
3Put the adapter plug in the wall socket and
insert the appliance plug into the inlet
socket.
C4Switch the appliance on by selecting the
desired speed.
Select speed I for areas with little hair growth and
for areas where bones are located directly
beneath the skin, such as knees and ankles.
Select speed II for larger areas with stronger hair
growth.
5Stretch your skin with your free hand to
make the hairs stand upright.
C6Place the appliance perpendicularly onto
the skin and move it against the direction
of hair growth.
Make sure both the epilating discs and the skin
cooler are in proper contact with the skin.
Do not press the appliance onto the skin.
ENGLISH10

Epilating underarms and bikini line
Types HP6459 and HP6457 only
The special underarm skin cooler reduces the
number of active epilating discs. Combined with
the large cooling surface, the underarm skin
cooler makes epilating sensitive areas less painful.
You will get the best results when the hairs are
not too long (max. 1 cm).
C1Snap the protective sleeve onto the skin
cooler.
C2Snap the appliance onto the skin cooler.
C3Switch the appliance on by selecting the
desired speed.
We advise you to use speed II.
C4To epilate the underarm area, place one
arm behind your head to stretch the skin
and place the appliance perpendicularly
onto the skin with the hand of the other
arm.
5Move the appliance slowly across the skin
against the direction of hair growth.
ENGLISH 11

Shaving
Types HP6459 and HP6455 only
You can use the shaving head to shave delicate
body parts, such as your underarms and bikini
line.With the shaving head you will obtain a
smooth result in a comfortable and gentle way.
1Switch the appliance off.
2Remove the skin cooler.
C3Remove the epilating head.
Grab the epilating head by the ribbed sections
and move it in the direction of the arrow
indicated on the epilating head.
C4Place the shaving head on the appliance
and move it against the direction of the
arrow indicated on the shaving head until
it snaps home.
The shaving head can only be fitted onto the
appliance in one way.
5Switch the appliance on by selecting the
desired speed.
We advise you to use speed I.
6Place the shaving head onto your skin and
move the appliance slowly and smoothly
against the direction of hair growth, while
pressing it lightly.
ENGLISH12

Exfoliating (peeling)
Only use the peeling head on your legs, not on
your underarms or bikini line.
1Switch the appliance off.
2Remove the skin cooler.
C3Remove the epilating head.
Grab the epilating head by the ribbed sections
and move it in the direction of the arrow
indicated on the epilating head.
C4Place the peeling head on the appliance
and move it against the direction of the
arrow indicated on the peeling head until it
snaps home.
The peeling head can only be fitted onto the
appliance in one way.
5Switch the appliance on.
Use speed I or II, depending on the required
peeling intensity.We recommend peeling each leg
for 1-3 minutes.
- Use the peeling head once or twice a week to
improve the appearance of your skin.
- Don't use any cream, foam, gel or lotion just
before or during peeling.
- Don't use the peeling head within two days
after epilating.
- For hygienic reasons, the peeling head should
only be used by one person.
ENGLISH 13

- We advise you to peel before going to bed at
night, as this will allow any skin irritation that
may develop to diminish overnight.
- Apply a mild cream or body milk after peeling.
Cleaning the appliance
Never rinse the adapter plug or the appliance
itself with water.
Do not use any corrosive detergents, scouring
pads or cloths, petrol, acetone etc. to clean the
appliance.
1Switch the appliance off, pull the adapter
plug out of the wall socket and pull the
appliance plug out of the appliance.
2Remove the skin cooler from the appliance
and slide the protective sleeve off the skin
cooler.
3Clean the skin cooler, the appliance and
the protective sleeve with a moist cloth.
C4Remove the epilating head.
Grab the epilating head by the ribbed sections
and move it in the direction of the arrow
indicated on the epilating head.
C5Clean all accessible parts and the epilating
discs with the brush.
Never try to detach the epilating discs from the
appliance.
ENGLISH14