Philips HP4867/00 User manual

Register your product and get support at
www.philips.com/welcome Hairdryer
HP4867/00
EN User manual

JLDUW6Q\U'QROD6 KW
:
bce
d
a
f
i
h
g

English
Congratulations on your purchase, and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the appliance and keep it
for future reference.
WARNING: Do not use this appliance near water.
•
When the appliance is used in a bathroom, unplug it after use since• the proximity of water presents a risk, even when the appliance is
switched off.
WARNING: Do not use this appliance near bathtubs,
• showers, basins or other vessels containing water.
• Do not insert metal objects into the air grilles to avoid
electric shock.
Never block the air grilles.
•
Before you connect the appliance, ensure that the voltage indicated• on the appliance corresponds to the local power voltage.
Do not use the appliance for any other purpose than described in
• this manual.
Do not use the appliance on articial hair.
•
When the appliance is connected to the power, never leave it• unattended.
Always unplug the appliance after use.
•
Never use any accessories or parts from other manufacturers or that• Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not wind the mains cord round the appliance.
•
If the mains cord is damaged, you must have it replaced by Philips, a• service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.

This appliance is not intended for use by persons (including children)• with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
• the appliance.
For additional protection, we advise you to install a residual current
• device (RCD) in the electrical circuit that supplies the bathroom.This
RCD must have a rated residual operating current not higher than
30mA. Ask your installer for advice.
If the appliance overheats, it switches off automatically. Unplug the
• appliance and let it cool down for a few minutes. Before you switch
the appliance on again, check the grilles to make sure they are not
blocked by uff, hair, etc.
Noise Level: Lc = 80 db(A)
Electromagnetic elds (EMF)
This appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
Environment
Do not throw away the appliance with the normal household
waste at the end of its life, but hand it in at an ofcial collection
point for recycling. By doing this, you help to preserve the
environment.
2 Dry your hair
1Connect the plug to a power supply socket.
For precise drying, attach the concentrator (• ) onto the hairdryer
( ).To disconnect, pull it off the hairdryer.
To straighten your hair while you dry it, attach the Straightening
• attachment ( ) onto the hairdryer ( ).

To disconnect, press both release buttons (») simultaneously and
pull it off the hairdrayer.
2 Adjust the airow switch ( ) to for gentle airow and styling, or
for strong airow and fast drying.
The ion function activates when an airow is selected. The function
• provides additional shine and reduces frizz.
When the function is on, a special odor may be smelt. It is normal»
and caused by the ions which are generated.
3Adjust the temperature switch ( ) to for hot airow, for warm
airow, or for cool airow. Press the cool shot button ( ) for
cool airow to x your style.
with the Straightening attachment:
Note: For optimum care, the operating temperature of the hairdryer is
limited when the straightening attachment is attached.
1Comb your hair and take a section for straightening.
2Put the tips of the straightening attachment on your scalp at the
roots of the lock to catch the hair in the comb.
3Pull the straightening attachment downwards through the hair.
Note: Always hold the tip of the hair when you pull the straightening
attachment through it.
The pivoting head optimally guides the hair through the»
straightening attachment.
The ocked area at the top of the straightening attachment adds »
shine to the hair after the comb has straightened it.
4Repeat steps 2 to 3 with other locks until you have straightened and
dried all your hair.
After use:
1Switch off the appliance and unplug it.
2Place it on a heat-resistant surface until it cools down.
3Take the air inlet grille ( ) off the appliance to remove hair and dust.
4Clean the appliance by damp cloth.
5Keep it in a safe and dry place, free of dust.You can also hang it with
the hanging loop ( ).

3 Guarantee and service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.

© Royal Philips Electronics N.V. 2009
All rights reserved.
Specications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
PDCC-2009
3140 035 20721