Philips HP8270/01 User manual

Hairdryer
Register your product and get support at
www.philips.com/welcome
HP8270
EN User manual

a
b
cd
e
f
g
h
9

English
1 Important
Read this user manual carefully before you use the appliance and
keep it for future reference.
 WARNING: Do not use this appliance near water.
 When the appliance is used in a bathroom, unplug it after use
since the proximity of water presents a risk, even when the
appliance is switched off.
 WARNING: Do not use this appliance near bathtubs,
showers, basins or other vessels containing water.
 Do not insert metal objects into the air grilles to avoid
electric shock.
 Never block the air grilles.
 Before you connect the appliance, ensure that the voltage
indicated on the appliance corresponds to the local power
voltage.
 Do not use the appliance for any other purpose than described
in this manual.
 
 When the appliance is connected to the power, never leave it
unattended.
 Always unplug the appliance after use.
 Never use any accessories or parts from other manufacturers

accessories or parts, your guarantee becomes invalid.
 Do not wind the mains cord round the appliance.

 If the mains cord is damaged, you must have it replaced by

persons in order to avoid a hazard.
 This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
 Children should be supervised to ensure that they do not play
with the appliance.
 For additional protection, we advise you to install a residual
current device (RCD) in the electrical circuit that supplies the
bathroom.This RCD must have a rated residual operating
current not higher than 30mA. Ask your installer for advice.
 If the appliance overheats, it switches off automatically. Unplug
the appliance and let it cool down for a few minutes. Before you
switch the appliance on again, check the grilles to make sure they

Noise Level: Lc = 85dB [A]

This appliance complies with all standards regarding electromagnetic


evidence available today.

Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in at an

to preserve the environment.
 
Congratulations on your purchase, and welcome to Philips! To fully

www.philips.com/welcome.
The ActiveCare dryer has a unique and innovative new sensor
technology called the TempPrecision sensor.This technology has

and is much gentler on the scalp than conventional dryers.
The TempPrecision sensor is an
infrared sensor, that measures the
temperature of your hair while
drying it and will ensure that it never
overheats your hair and scalp.This
gives advanced protection to the hair
from overheating the hair and the
scalp and therefore keeps your hair
healthier and shinier.
We’ve already turned the sensor
on so you can enjoy maximum
protection right from the start.

3 Dry your hair
1 Connect the plug to a power supply socket.
 For precise drying, attach the nozzle ( ) onto the hairdryer.

brush or comb with which you are styling your hair.
 To enhance volume for curls and bouncy style, attach the
diffuser ( ) onto the hairdryer.To disconnect the attachment,
pull it off the hairdryer.
 You are recommended to use the styling nozzle ( ) only for
styling and use theThermoprotect heat setting for this purpose.
2  ) is on so that you are
guaranteed to have protection from overheating the hair.
3  ) and temperature switch ( ) to
suitable positions.
switch settings function
Temperature Quick dry 
Thermoprotect Provides the optimal drying
temperature and gives
additional protection from
overheating the hair
Gently dry the hair
 

Switch

» The LED ( ) will always light up when the sensor is
switched on.
4 Press the cool shot button ( 
5 The appliance is equipped with ion function, which provides
additional shine and reduces frizz.
» When the function is on, a special odor may be smelt. It is
normal and caused by the ions which are generated.
 To turn the ion function on or off, slide the IONIC switch
() to or .
» If the function is on, the ion indicator lights up.
After use:
1 Switch off the appliance and unplug it.
2 
3 Clean the appliance by damp cloth.
4 Keep it in a safe and dry place, free of dust.You can also hang it
with the hanging loop ( ).
5 Remove the concentrator or diffuser before you clean the
appliance.
 
If you need information e.g. about replacement of an attachment or
if you have a problem, please visit the Philips website at
www.philips.com/welcome or contact the Philips Consumer Care
Center in your country.The phone number is in the worldwide

country, go to your local Philips dealer.

©2011 Koninklijke Philips Electronics N.V.
All rights reserved.

Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
3140 035 27971