Philips SHB1300/93 User manual

EN User manual 10
SC 2
SHB1300 /
SHB1300 Bluetooth headset

23

45

67

89
产品中有毒有害物质或元素的名称及含量
部件名称
(Name of the Parts)
铅
Pb,Lead ( )
汞
(Hg, Mercury)
镉
Cd, ( Cadmium)
六价铬
(Chromium 6+)
多溴联苯
PBB ( )
聚
( )
溴二苯醚
PBDE
有毒有害物质或元素
(Hazardous/toxic Substance)
0: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/TII363-2006标准规定的限量要求以下。
X:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/TII363-2006标准规定的限量要求。
(企业可在此处, 根据实际情况对上表中打"x"的技术原因进行进一步说明。)
0 0 0 0 0 0
线路板 &电子元器件
(PCBA)
外壳
(Housing)
耳机
(Headset)
电池
(Battery)
充电线 USB
(USB Charger Cable)
说明书
(User Manual)
包材
(Packaging Materials)
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0

10 11
Multi-function
button (S1)
Volume up (S2) Volume down (S3)
LED
DC Socket
Microphone
Earphone /
Microphone cable
Neck strap
Clip (S4)
Slider (S5)
Y-Connector (S6)
Earplug
Rubber
ear caps
Speaker
12 Getting started
12 Charging your headset
12 Pair your headset to your mobile phone
13 Turn your headset on
13 Turn your headset off
13 Connecting your Bluetooth headset
14 Using your headset
14 Answering incoming calls
14 Transferring calls
14 Muting the microphone
14 Ending calls
14 Voice dialing
15 Redial last dialed number
15 Reject incoming calls
15 Adjusting speaker volume
15 Wearing your Bluetooth headset
Wearing options
16 Pr oblem solving & suppor t
16 Specifications
17 Certifications, approvals, statements
Contents

12 13
Bluetooth headset
SHB1300
Congratulations! You have just bought a state-of-the-art Philips Bluetooth headset.
With the Philips SHB1300 you can enjoy convenient hands-free communication with
your Bluetooth enabled phone. This instruction manual will help you to get started
quickly and achieve the best performance from your headset.
Getting started
2.To activate pairing mode press and hold the multi function button S1until the LED starts
flashing red and green alternately. The HS will remain in pairing mode for 4 minutes, to
resume pairing after 4 minutes repeat the steps above.
3.Follow the operating instructions for your mobile phone to start the pairing process.
Typically this involves accessing a menu called “Setup”, “Bluetooth” or “Connectivity”
and selecting the option to discover or search for Bluetooth devices. After several
seconds search time your phone should indicate that it has found the “Philips SHB1300”.
4.Upon selecting the headset on your mobile phone typically you will need to confirm the
pairing and enter a passkey or PIN. Please enter the headsets PIN “0000” (4 zeros).
The headset LED will flash green every 3 seconds, indicating successful pairing. If your phone
asks whether you want to change the headsets name, you may confirm the“Philips SHB1300”
name or change it. You are now ready to talk!
If pairing does not occur as expected turn the headset and phone off and wait for10 seconds.
Turn the headset and phone on again and repeat Steps 1-4.
Turn your headset on
While the headset (HS) is turned off, press and hold the multi function button until a green
LED signal for 1 second and a low tone followed by a high tone will indicate that the HS is
powered up. Once the HS is powered up a green LED will flash every 3 seconds.
Turn your headset off
While the HS is powered up, press and hold the multi function button S1 for 3 seconds.
A high tone followed by a low tone will indicate that the HS is powered down.The LED
indicator will remain red until S1 is released.
Connecting your Bluetooth headset
Pairing needs to be done only once for the initial setup. After the initial pairing follow these
simple steps to connect your Bluetooth headset to your mobile phone:
● Make sure Bluetooth is enabled on your mobile phone.
● Turn on the headset
After a few seconds the connection between your headset and mobile phone will be
established. If prompted by your mobile phone whether to accept the connection
with the headset please confirm in order to establish the Bluetooth link. You are
now ready to talk!
Charging your headset
Before you use your headset for the first time charge the
battery for 6 hours for optimum battery capacity and
lifetime.
The headset LED will flash red instead of green when the
battery is low and you will hear a short beep every few
minutes. Finish your call before re-charging as connecting
the USB cable to the headset will put your headset in
charging mode and could cut an ongoing the call.
Pair your headset to your mobile phone
Your Bluetooth headset must be paired to your mobile
phone before using it for the first time with your phone.
“Pairing” will establish a unique encrypted link between
your mobile phone and your headset.
1.Make sure the headset (HS) is turned off, charged and
disconnected from the charging cable before you start
pairing.
Use only the original USB cable for charging. Using another
charger may damage or destroy your headset!
Plug the USB cable into a USB port and connect the cable to
the headsets charging socket. During charging the LED
indicator will show a steady red light. Charging is completed
once the LED has switched off. Typically a full charge will
take 3 hours.

14
Using your headset
15
Redialing the last dialed number (Available if supported by your mobile phone)
To redial the last dialed number, press and hold the volume down key S3 for 2 seconds.
A short low tone will indicate an attempt to redial.
Rejecting incoming calls (Available if supported by your mobile phone)
To reject an incoming call, press the multi function button S1 and hold it until you hear
a long beep tone, then release it.
Adjusting speaker volume
During a call:
Press and release S2 to increase the speaker volume and
Press and release S3 to decrease the speaker volume.
A key tone will indicate any increase or decrease of the volume. A higher pitch signal
tone will alert you when the volume level reaches its maximum or minimum.
Wearing your Bluetooth headset
Wearing options
The Bluetooth headset can be attached to your garment
with the metal clip or be worn around the neck.
To change from clip on style to necklace style, attach the
neck strap in three steps:
1. Attach the Y-connector (S6) to the earplug cable close
to Bluetooth device.
2. Attach the slider (S5) to the earplug cable beneath the
clip (S4).
3. Fix the slider position by attaching the clip (S4) to the
earplug cable.
You can detach the neck strap from the earplug cable at
any time .
Answering incoming calls
The HS will ring when a call comes in. Press the multi function button S1 to answer the
call. The green LED will flash fast (once a second) while the call is in progress.
Transferring calls (Available if supported by your mobile phone)
During your call, calls can be transferred from the Bluetooth phone to the HS and
from the HS to the Bluetooth phone.
To transfer a call from HS to the Bluetooth phone, please follow the operating
instructions of your phone.
To transfer a call from the Bluetooth phone to the HS: press S1 once; the call will
be transferred to the HS.
Muting the microphone
To mute the microphone during an active call:
Press the volume control buttons S2 and S3 simultaneously for about a second. A
periodic beep tone will be heard while the mute function is active.
To end the mute function:
Press the volume control buttons S2 and S3 simultaneously. The periodic beep tone
will stop.
Ending calls
Press S1 to end an ongoing call. After the call is disconnected, the green LED will flash
once every three seconds.
Voice dialing (Available if supported by your mobile phone)
1. Make sure the voice dialing function is properly set up in your mobile phone.
2. Press the multi function button S1 on the HS shortly.
3. After hearing the voice dial signal (four tones low to high pitch), say the name of the
person as recorded in your mobile phone. The call will be connected within a few
seconds.

16 17
Problem solving & support
To adjust the neckband in size:
Open the clip (S4)
Move the slider (S5) up or downward on the earplug
cable
Fix your preferred length with the clip (S4)
For optimal wearing comfort choose one of the three
included rubber ear caps that best fits your ear and place
it on the earplug.
Specifications
Problem Possible cause Solution
Bluetooth headset does
not switch on.
Battery is very low. Charge the battery.
No connection to mobile
phone.
Bluetooth disabled. Enable Bluetooth on your
mobile phone and turn the
HS on.
Mobile phone cannot find
headset
Headset may not be in
pairing mode. (HS stays in
pairing mode for 4 min.)
Put HS in pairing mode as
described above.
Pairings may have been
reset.
Start the pairing process as
describe above.
Redialing does not work. Your mobile phone may
not support this feature.
Voice dialing does not
work.
Your mobile phone may not
support this feature.
*Please visit www.philips.com/support for additional support.
Rechargeable Lithium-Ion battery
Bluetooth 1.2 compliant, HSP, HFP
Range: Up to 33 feet / 10 meters
Typical standby time: 200 hours
Typical talk time: 7 hours
Typical charging time: 3 hours
Design and specifications are subject to change without notice. Talk time and stand-by
time may vary.
The headset is not charging
or charging very slowly
The USB port provides no, or
too little power.
Your USB port should provide
500mA. Try another USB port
at the back of your PC or on a
powered USB hub.
Certifications, approvals, statements
Trademarks
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Koninklijke Philips Electronics N.V. is under license. Other trademarks and
trade names are those of their respective owners.