Philips MCB395 User manual

MCB395
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
User Manual
Quick start guide User manual Remote control with
1 x CR2025 battery
Pull out the plastic
protective sheet
before use.
MCB395 QSG_05-Eng 2008.4.25, 10:031

Connect the speaker cables.
Connect the power plug to AC power socket.
1
2
Tip
See the User Manual for how to connect other equipment
to this system.
AC power cord
Speaker
(left)
Speaker
(right)
DAB/FM T-type antenna
1
2
MCB395 QSG_05-Eng 2008.4.25, 10:032

4
3
Setting the clock
1
2
5
In the standby mode, press and hold CLOCK on the remote control.
➜The clock digits for the hours continue to flash.
Adjust VOLUME -/+ (or press VOL +/- on the remote control) to set the hours.
Press CLOCK to confirm.
➜The minute digits start flashing.
Adjust VOLUME -/+ (or press VOL +/- on the remote control) to set the minutes.
Press CLOCK to confirm the time.
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio files as you do with the albums/tracks on a CD.
Enjoy
C
Playing a disc
1
2
3
Press OPEN/CLOSEçto open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜Make sure the label side of the disc is facing up.
Press ÉÅ to start playback.
To stop playback, press 9.
D
o
n
o
t
p
u
t
i
n
d
i
r
e
c
t
s
u
n
l
i
g
h
t
o
r
a
p
r
o
l
o
n
g
e
d
p
e
r
i
o
d
Notes for remote control:
– First select the source you wish to control by pressing one of the source select
keys on the remote control (for example FM, DISC).
–Then select the desired function (for example
É ,S , T).
IMPORTANT!
– To set clock in the Eco Power mode, press and hold ECO POWER/STANDBY-ON
2 on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the procedures below.
iPod playback via the USB
port cannot be guaranteed.
MCB395 QSG_05-Eng 2008.5.23, 13:353

PDCC-JS_JW-0716
Enjoy
C
Printed in China
Programming and tuning to FM radio
stations
1
2
3
Press SOURCE repeatedly (or FM on the remote control) to select the
tuner source.
Press PROG on the remote control) for more than two seconds to
program all available stations in order of waveband.
Press ALBUM/PRESET 4or 3(or ¡ / ™on the remote control) until
the desired preset station is displayed.
3
2
1
Tuning to DAB stations
Press SOURCE on the system to select DAB (or press DAB on the remote control) to start
automatic search for available DAB stations.
Press SCAN to search for all band III frequencies.
At the completion of full scan, press ALBUM/PRESET 4or 3 (or ¡ / ™ on the remote
control) to select your desired DAB channels backward/forward.
Press ENTER/ÉÅ to confirm and tune to your selected channel.
Tip
–See the User Manuals for detailed instructions on DAB
operations.
4
MCB395 QSG_05-Eng 2008.4.25, 10:034