Philips GC4500 series User manual
1
© 2017 Koninklijke Philips N.V.
All rights reserved.
4239 001 04683
GC4500 series
User manual
Kullanım kılavuzu
a
b
d
g
f
e
h
c
a
b
c
Quick Start Guide – Storage
22
20 21
Quick Start Guide – Calc clean
12
11 13
14 16
15
18
17 19
24
6
5
Quick Start Guide – Start here
810
9
3
7
GC4500 series
ENGLISH 6
9
TÜRKÇE 13
16
19
6
ENGLISH
Important
offers, register your product at www.philips.com/welcome.
appliance. Keep both documents for future reference.
Product overview (Fig. 1)
1 Spray button
2 Steam slider
a. Dry setting
b. ECO setting
c. Auto steam setting
3 Steam boost trigger
5 Temperature indicator light
6 Temperature dial with Auto steam control
7 Calc clean button
8 Built-in calc container
Type of water to use
Your appliance has been designed to be used with tap water. If you live in an area with hard water, fast
scale build-up may occur. Therefore, it is recommended to use distilled or demineralized water to prolong
the lifetime of your appliance.
Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank.
Ironing
Please read the quick start guide in this user manual carefully to start using your appliance.
(Fig. 2-10)
Temperature setting
Select the temperature to the appropriate setting for your garment according to table 1 below:
Table 1:
Fabric type Temperature setting Auto steam control Steam boost
Linen MAX
Automatically adjusted to
the optimal amount
Yes
Cotton Yes
Wool No
Silk No
Synthetic fabric (e.g. acrylic, nylon,
Automatically adjusted to
no steam No
ENGLISH
7
Steam setting
-Auto steam: The iron automatically adjusts the steam output according to the selected temperature
to provide the best ironing result.
-ECO: This steam setting enables you to reduce the steam output to save energy and still have
-Dry: This steam setting enables you to iron without steam or to stop steam when the iron is not
in use.
-Iron with extra steam: Press and hold the steam boost trigger to get more steam to remove
stubborn creases.
The delicate fabric protector protects delicate fabrics from heat damage and shiny patches.
MAX in combination with all steam functions available on the iron.
The delicate fabric protector reduces the soleplate temperature instantly, thus allowing you to iron
delicate fabrics safely.
If you do not know what kind or kinds of fabric an article is made of, determine the right ironing
temperature by ironing a part that is not visible when you wear or use the article.
1Put the iron on the delicate fabric protector (‘click’) (Fig. 10).
Steam boost function and vertical steaming
- Press and release the steam boost trigger for a powerful boost steam. This can be used to remove
targeted stubborn creases or creases from a hanged garment.
Hot steam comes out of the iron. Do not remove wrinkles from a garment while some one is wearing
it. To prevent burns, do not direct the steam at people.
The safety auto-off function automatically switches off the iron if it has not been used for 30 seconds
resting on its soleplate or 8 minutes resting on its backplate. The auto-off light will light up.
- To let the iron heat up again, pick up the iron or move it slightly. The auto-off light goes out.
Cleaning and maintenance
Cleaning
1 Unplug the iron and let it cool down.
2
3 W
cleaning agent.
To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad,
vinegar or other chemicals to clean the soleplate.
ENGLISH
8
Calc clean function
1 Make sure the iron is unplugged and the steam slider is set to dry setting. (Fig. 11)
2 Fill the water tank to the MAX indication. (Fig. 12)
Do not pour vinegar or other descaling agents into the water tank.
3 Plug in the iron and set the temperature dial to MAX. (Fig. 13)
Unplug the iron when the temperature light goes out. (Fig. 15)
5 Hold the iron over the sink. Keep pushing the calc clean button and gently shake the iron forth and
back until all water in the water tank has been used up. (Fig. 18)
6 Plug in the iron and let the iron heat up to dry the soleplate. (Fig. 19)
7 Unplug the iron when the temperature indicator light goes out.
8 Move the iron gently over a piece of cloth to remove any water stains on the soleplate.
Troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If you are
unable to solve the problem with the information below, visit www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Centre in your country (see the worldwide
Problem Possible cause Solution
door.
.
MAX indication. Pour excess water out
of the water tank.
Water drips from the soleplate after
the iron has been unplugged or has
been stored.
The steam slider is set to MAX
or ECO.
Set the steam slider to dry setting.
You have put the iron in horizontal
position with water still left in the
water tank.
Empty the water tank.
The steam boost function does not
work properly (water leaks out of
You have used the steam boost
function too often within a very
short period.
Wait for a few seconds before you use
the steam boost function again.
You have used the steam boost
function at too low a temperature.
Set an ironing temperature at which
the steam boost function can be used
(to MAX
Flakes and impurities come out of
the soleplate during ironing.
Calc are formed inside the
soleplate.
Use the calc clean function (see chapter
‘Cleaning and maintenance’, section ‘calc
8
9
www.philips.com/welcome.
.
MAX
Silk
10
-
-ECO
-
-
MAX
1
-
-
1
2
3
11
1
.
2 .
3
.
.
5
.
6 .
7
8
www.philips.com/support
.
MAX).
MAXECO.
12
MAX
GC4506, GC4515, GC4516
GC4517, GC4519, GC4528, GC4525
GC4526, GC4527, GC4529
13TÜRKÇE
Önemli
www.philips.com/welcome adresinde kaydettirin.
Ütüleme
Tablo 1:
Otomatik buhar kontrolü
Keten MAX
Otomatik olarak optimum
Evet
Pamuklu Evet
Yünlü
Silk
Otomatik olarak buhar
TÜRKÇE
-Otomatik buhar
otomatik olarak ayarlar.
-ECO
-Kuru
-
ile MAX
1
Buhar püskürtme fonksiyonu ve dikey ütüleme
-
Güvenli otomatik kapanma (sadece belirli modellerde)
-
Temizleme
1
2
3 N
TÜRKÇE
15
1
2 Su haznesini MAX göstergesine kadar doldurun
3 .
.
5
.
6
7
8
Sorun giderme
www.philips.com/support
Sorun Nedeni Çözüm
olabilirsiniz.
Su haznesini MAX
MAX veya ECO
Ütünüzü dik olarak oturtarak
su haznesinde su olup
Buhar püskürtme fonksiyonunu
Buhar püskürtme fonksiyonunu yeniden
Buhar püskürtme fonksiyonunu
olabilirsiniz.
Buhar püskürtme fonksiyonunun
belirleyin (- MAX
15
16
www.philips.com/welcome.
MAX
17
-
-
-
-
MAX
1
-
-
1
2
3
17
18
1
.
2
3
5
.
6
7
8
www.philips.com/support
.
MAX
.
MAXECO.
MAX
19
www.philips.com/welcome.
1
20
-
-ECO
-
-
MAX
1
-
-
1
2
3
20
21
1
.
2 .
3
.
.
5
.
6 .
7
8
www.philips.com/support
.
MAX
ECO
21
22
(to MAX
GC4506, GC4515, GC4516
GC4517, GC4519, GC4528, GC4525
GC4526, GC4527, GC4529
Other manuals for GC4500 series
12
This manual suits for next models
1
Table of contents
Other Philips Iron manuals
Philips
Philips Mistral GC2225 User manual
Philips
Philips HI228/22 User manual
Philips
Philips Azur GC4243 User manual
Philips
Philips PerfectCare Pure GC7640 User manual
Philips
Philips GC5000 series User manual
Philips
Philips GC3800 series User manual
Philips
Philips GC1442/27 User manual
Philips
Philips GC9600 PerfectCare Elite Plus User manual
Philips
Philips GC9500 Series User manual
Philips
Philips HD1173 User manual
Philips
Philips PerfectCare 6000 Series User manual
Philips
Philips HI 205 User manual
Philips
Philips GC1701 User manual
Philips
Philips GC4518/30 User manual
Philips
Philips GC8600 Series User manual
Philips
Philips GC5030 series User manual
Philips
Philips COMFORT GC1121 User manual
Philips
Philips GC3500 series User manual
Philips
Philips GC6034/03 User manual
Philips
Philips HR6961/01 User manual
Popular Iron manuals by other brands
Russell Hobbs
Russell Hobbs SmartGlide PRo instructions
Brabantia
Brabantia BBEL1001 instruction manual
LauraStar
LauraStar STEAMUPi-G5 740 instruction manual
Panasonic
Panasonic NI-L70SR - Steam Iron With Micro-Mist Spray operating instructions
TEFAL
TEFAL GV9567 manual
Eureka
Eureka Blaze LCD instruction manual
