Philips GC8320 User manual

ServiceManual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Boiler Steam Iron
GC8320
10/06
PRODUCT INFORMATION
Features
Iron
- SteamGlide Soleplate
- Continuous steam in horizontal & vertical position
- Adjustable steam rate up to 110 g/min
- Shot Of Steam up to 150 g/min
- Steam activator lock
- Automatic drip stop
- Soft touch hand grip
- Steam tip for hard-to-reach places
- Steam hose length : 1.7 m
Stand
- Anti-corrosion Inox boiler
- Boiler sensing : Electronic
- Boiler pressure : 5.0 bar
- Fast heat-up : steam ready in 2 mins.
- Cord length : 2.5 m
- Hose cord storage
- Easy to rinse
- Iron lock for safe storage
- Detachable tank : 1.4 L
Safety Information
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down as this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power Iron : 800 W
Boiler : 1370 W
Dimension (F-box) : 350 x 350 x 250 mm (L x W x H)
Weight (with packing) : 6.4 kg
Water advice
If the tap water in your area is very hard, it is advisable to mix
the tap water with an equal amount of demineralised water.
SteamGlide Soleplate
Scratch resistant, non-stick, easy to clean & very durable.
Fast ironing
Steam ready in 2 minutes & up to 5 bar of steam pressure
penetrating deeper into the fabrics.
Iron lock
Safely store the iron on the stand.
Easy to rinse
The new design of the rinse cap makes it very easy to rinse
the boiler regularly. Simply unscrew the cap and pour out the
“dirty” water into the sink.
No hassle with coins, extra tubes or anything of this sort.
Large detachable water tank
1.4 Liter water tank allows up to 3 hours freedom of ironing
without refilling.

GC8320
2-9
BACKPLATE 1
SWIVEL 2
HOSE CORD ASSY 3
Remove Screw A
Disassemble BACKPLATE 1
Remove Screw B1, B2
Remove Clamping plate
Remove Power cord quick-connect S, E, L, N
Remove Hose clip (a)
Disassemble Steam hose
Disassemble HOSE CORD ASSY 3
Steam hose
S
Black
Hose clip(a)
Power cord
N
Blue
Clamping
plate
BlueGreen
NLE
B2 B1
Brown
Fig 1. Wiring at rear HOUSING (Part 1)
Blue
(Micro switch)
Black
(Microswitch)
White
(Lamp assy)
Blue
(Lamp assy)
NS
Fig 2. Wiring at rear HOUSING (Part 2)
DISASSEMBLY ADVICE - IRON
INLAY 4
STEAM LOCK 6
LAMP ASSY 7
MICROSWITCH ASSY 9
SWITCH HOLDER 10
PIVOT HOLDER 11
TRIGGER 12
THERMOSTAT DIAL ASSY 14
HOUSING PRINTED 16
SOLEPLATE COVER 17
THERMOSTAT BUSH 19
RUBBER HOSE 25
BRASS JOINT 21
SOLEPLATE ASSY 23
Remove Screw A
Disassemble BACKPLATE 1
Release Inlay rear catch
Disassemble INLAY 4
Disassemble STEAM LOCK 6
Disassemble SWITCH HOLDER 10
Disassemble MICROSWITCH ASSY 9
Remove Screw C
Disassemble PIVOT HOLDER 11
Disassemble TRIGGER 12
Disassemble THERMOSTAT DIAL 14
Fig 3.
Remove Screws D1, D2, D3
Disassemble HOUSING PRINTED 16
Remove Screws E1, E2, E3
Disassemble SOLEPLATE COVER 17
Remove Hose clip (b)
Disassemble RUBBER HOSE 25

GC8320
3-9
PARTS LIST - IRON & ELECTRICAL DIAGRAM
STAND IRON
L
N
Boiler Electronics
On/Off switch
Steam up switch
Steam down switch
Thermal
Fuse
Thermal
Fuse
L
N
L
S
N
Boiler
Heating
Element
Reed
Switch
Thermistor
1
Ther-
mostat
Heating
Element
Pump
M
Electro-
valve
Thermistor
2
Power LED x 1
Steam LEDs x 4
Tank Empty LED x 1
Rinse Reminder LED x1
Fig 4 . Electrical diagram
Pos Service code Description
1
3
4
5
6
7
9
10
11
12
13
14
16
17
18
19
22
23
24
25
26
27
28
4239 026 24160
4239 021 37391
4239 026 34880
4239 026 08280
4239 026 21820
4239 021 36861
4239 021 31790
4239 026 21780
4239 026 21790
4239 026 21800
4239 010 09290
4239 021 35310
4239 021 51430
4239 021 32870
4239 015 70150
4239 026 13220
4239 010 10280
4239 021 41330
4239 015 56120
4239 015 56510
4239 026 24180
4239 021 31780
4239 010 10110
Backplate (Purple)
Hose cord mounted assy
Inlay SOS
Lamp cover
Steam lock
Lamp mounted assy
Microswitch assy
Switch holder
Pivot holder
Trigger
Trigger spring
Thermostat dial assy (Purple)
Housing printed
Soleplate cover painted
Ryton ring
Thermostat bush
Hose clip - braided rubber hose
Soleplate assy 230 V (Steamglide-SOS)
Rubber hose (SOS)
Rubber hose (dosing)
SOS knob (Purple)
Steam deviator assy
Hose clip
= changed

GC8320
4-9
EXPLODED VIEW - IRON
6
5
13
22
4
26
9
10
11
16
17
27
24
19
23
25 21
2
7
12
14
1
3
18
A
S
NLE
B1
B2
D3
Hose
clip (a)
Hose
clip (b)
E2
D2
C
D1
E1
E3
28
22

GC8320
5-9
TRAY RUBBER (MAIN) 30
TRAY 33
STAND TOP 34
FRONT PANEL PRINTED 37
BOILER ASSY EE 38
ELECTROVALVE 40
POWER BOARD 43
CONTROL BOARD 44
PUMP ASSY 45
INLET TUBE 46
DE-AIR TUBE 47
RINSE RUBBER COUPLING 50
RINSE BUSH 51
SAFETY CAP ASSY 52
REED SWITCH ASSY 53
Remove WATER TANK ASSY 70
Remove TRAY RUBBER (MAIN) 30 (3x)
Remove Screws J1, J2, J3
Disassemble TRAY 33
Remove Screws K1, K2, K3, K4
Disconnect INLET TUBE 46
Disconnect DE-AIR TUBE 47
Remove SAFETY CAP ASSY 52
Remove RINSE BUSH 51
Remove RINSE RUBBER COUPLING 50
Disassemble STAND TOP 34
Remove Screws L1, L2
Disassemble FRONT PANEL PRINTED 37
M1
M2
M3
12 11
109
Pos. Connected to Pos. Connected to
9 Reed switch 11 Thermistor
10 Power board 12 Hosecord (Black)
Fig 5. Connections on CONTROL BOARD 44
DISASSEMBLY ADVICE - STAND & DETACHABLE WATER TANK
Remove Connections 9, 10, 11, 12 (Fig 5)
Remove Screws M1, M2, M3 (Fig 5)
Disassemble CONTROL BOARD 44
21
20
15
14
18
13
22
16
17
19
Pos. Connected to Pos. Connected to
13 Pump-Control 18 Electrovalve-Live
14 Pump-Live (Brown) 19 Hosecord (Blue)
15 Boiler-Heating Element 20 Hosecord (Brown)
16 Boiler-Fuse 21 Cordset (Brown)
17 Electrovalve-Control 22 Cordset (Blue)
Fig 6. Connections on POWER BOARD 43
WATER TANK ASSY 70
TANK WASHER
TANK COUPLING
TANK LEVER
PICK UP TUBE
FILTER ASSY
Remove Screws N1
Disassemble TANK WASHER
Remove SCREWS N2, N3
Disassemble TANK COUPLING

GC8320
6-9
PARTS LIST - STAND & BOILER WIRING DIAGRAM
Wire WE4: PCB-Fuse
Wire WE3: PCB-HE
Wire WE6: PCB-EV B
Wire WE5: PCB-EV A
Wire WE8: Earth-EV
Wire WE7:
HE Fuse
Electrovalve
Thermistor
Thermistor
Fuse
(Thermofuse)
Loctite
Darbond
620
Fig 7 . Boiler Assy EE - Wiring Diagram
Abbreviations
HE : Heating Element
EV : Electrovalve
PCB : Power Board
Pos Service code Description
30
31
33
34
35
37
38
39
40
41
42
43
44
45
48
49
4239 015 56010
4239 015 56030
4239 010 11380
4239 021 44051
4239 026 21930
4239 022 56500
4239 021 43800
4239 026 22280
4239 017 10901
4239 015 56160
4239 010 10260
4239 021 31970
4239 021 56881
4239 021 32480
4239 015 55980
4239 015 55990
Tray rubber (Main)
Tray rubber (Rear)
Tray
Stand top assy (White)
Nipple plate
Front panel printed
Boiler assy EE
C-Wall
Electrovalve
Braided rubber hose
Inox clamp
Power board
Control board
Pump assy
Boiler rubber support A
Boiler rubber support B
Pos Service code Description
50
51
52
53
54
55
56
59
60
61
62
63
64
66
4239 015 56050
4239 026 22330
4239 022 62500
4239 021 31820
4239 026 22050
4239 000 09780
4239 000 09910
4239 000 09880
4239 021 37631
4239 015 56000
4239 026 22410
4239 026 22420
4239 026 22000
4239 026 22020
4239 026 22040
4239 010 11111
Rinse rubber coupling
Rinse bush
Safety cap assy
Reed switch assy
Reed switch holder
Cordset EU
Cordset UK
Cordset Swiss
Stand bottom assy
Power button cap (Silver)
Power button frame
Steam button frame
Light guide (ring)
Light guide (Steam)
Light guide (TE-RR)
Electrovalve mesh
= changed

GC8320
7-9
EXPLODED VIEW - STAND
35
30
31
33
34
45
62 60
49
61
63
64
41
42
K4
K2
K1
K3
M2
L2
L1
M3
M1
J1
J2
J3
59
37
39
3
43
55
49 53
54
48
56
20
38
47 46
52
51
50
44
40
66

GC8320
8-9
EXPLODED VIEW & PARTS LIST - DETACHABLE WATER TANK
N1
N2 N3
70
Pos Service code Description
70 4239 021 35320 Water tank assy (Purple)

GC8320
9-9
- Due to the high wattage of the iron, only the specified cord set must be used.
- Should damage be observed on the HOSE-CORD ASSY 3 or CORDSET 55, they must be replaced.
Continued usage is not allowed.
- When replacing the MICROSWITCH ASSY 9, please dress the 2 attached wires such that they are free of tension. Pulling force
on the wires may affect the steam triggering.
- To avoid damage to the sealing & components of the BOILER ASSY 38, NEVER clean the boiler assy with vinegar, descaling
agent or other corrosive chemicals.
- When replacing ELECTROVALVE 40 or PUMP ASSY 45, please be reminded to apply loctite at the joints for good sealing.
- After the product has been repaired, it should function properly and has to meet the safety requirements & legal regulations as
laid down & officially established at this moment.
- The following tests are common checks that are conducted on a repaired product before it is returned to the consumer.
1. Soleplate temperature
Check that soleplate temperature is within IEC requirement.
Measure the temperature of the soleplate after the iron has reached steady state i.e connected to the mains for at least 15 minutes.
The table below shows the temperature requirement.
Marking
Soleplate temperature (Deg C)
Material, for example
Test-
point
==
Minimum Maximum Nominal + Tolerance
•(1 dot) 70 120 95 ± 25 Acetate, elastane, polyamide, polyproylene
•• (2 dots) 100 160 130 ± 30 Cupro, polyester, silk, triacetate, viscose, wool
••• (3 dots) 140 210 175 ± 35 Cotton, linen
2. Leakage current
Check that leakage current is within IEC requirement.
Measure leakage current between LIVE/NEUTRAL & EARTH.
IEC requirement is that at 230 V supply, the EARTH leakage current must be less than 0.75 mA.
3. Water leakage / Functionality
Check that there is no water leakage from any part of the product during operation.
Check that the functionality of the product (product dependent) eg. steaming, variable steam, SOS, ASO etc is working properly.
4. Loose part
Check that there are no loose parts eg. extra screw in the product that can cause short-circuit or product malfunction.
REPAIR INSTRUCTIONS