Philips GoZero AWP2723BLO/37 User manual

Filtration bottle
GoZero
One bottle, two lters,
endless possibilities

EN
Cap
Mouthpiece
Lid
Strap
Filter case
Filter cartridge
Timer
Bottle
1
2
3
4
5
6
7
8
01

Get started
1. Before you go outdoors
Clean the bottle except for the lter cartridge with a mild detergent or in the
dishwasher (max 50℃). Take the lter out of the packaging, rinse it under the
tap water for 10 seconds. Unscrew the lid anti-clockwise. Remove the bottom
cover of the lter case, and insert the lter cartridge. Put the cover back, then
set the time of the next change by turning the dial. The arrow should be pointing
at the install month, and the dot indicates when to replace the lter.
2. Filling the bottle
Fill the bottle with visually clear water up to the Max line. Screw the lid back on
to the bottle. Remove the cap, pull out the mouthpiece and it's ready for use.
3. Changing the lter cartridge
One lter can lter up to 100 litres of clear water. To ensure optimal ltration
and hygiene, it is recommended to replace the lter every 4 weeks. To do this,
repeat step 2.
02
Adcenture Filter

Warning
- Always use the most clear and reliable water source possible. Strictly follow the
instruction and educate yourself on backcountry water safety. Improper usage
of GoZero™ Active bottle with Adventure lter increases your risk of exposure
to harmful microorganisms and getting gastrointestinal illness. GoZero™ Active
with Adventure lter should only be used to lter ambient water (5℃to 38 ℃);
never use it to lter seawater or chemically contaminated water. The quality of
the ltered water is not guaranteed if the product is submitted to conditions
other than those encountered during its normal use.
- Consume the water in the bottle within a day.
- The Fitness lter is compatible with the GoZero™ Active bottle. If you plan to
switch to the Fitness lter after using the Adventure lter, make sure to thoroughly
clean the entire bottle rst.
- The ltration of particles from the tap water may result in a signicantly lower
ow rate. In such cases, we recommend to change the lter more frequently.
- When not using your GoZero™ Active bottle for a longer period of time, the
bottle should be disassembled and stored completely dry. If it hasn't been
used for more than 2 days, rinse the lter under the tap water for 1 minute; if it
hasn't been used for more than 4 days, the lter should be replaced.
- Always store spare lters in a cool, dry place and ensure that they are tightly
sealed.
- Dispose of used Adventure lter with your general waste and the bottle according
to local provisions.
03

Disclaimer
Stated ltration performance and life time is conducted under standard laboratory
conditions. For more information, please visit www.philips.com/water.
The eectiveness may be limited by the environmental or hygienic conditions
that could cause the recontamination of water after it has passed through the
lter. These conditions include but are not limited to:
- Failure to maintain the cleanness of the mouthpiece
- Sharing of the bottle between individuals
- Use in or exposure to extreme heat or freezing temperatures
AquaShield and its aliated entities and related companies shall be neither liable
for any damages arising out of or because of the use of the GoZero™ Active bottle
with Adventure lter for any purpose other than for which it is clearly intended,
nor for any malfunction resulting from the failure of the user to strictly follow the
usage and safety information in this manual.
04

Get started
1. Cleaning the bottle
Clean the bottle except for the lter cartridge with mild detergent by hand or
in the dishwasher (max 50℃).
2. Preparing and installing the lter
Take the lter out of the packaging, check if the sealingring is in place. Rinse it
under tap water for 10 seconds. Unscrew the lid anti-clockwise. Remove the
bottom cover of the lter case and insert the lter cartridge. Put the cover back,
and set the time of the next change by turning the dial. The arrow should be
pointing at the install month, and the dot indicates when to replace the lter.
3. Filling the bottle
Fill the bottle with tap water up to the Max line. Screw the lid back on to the
bottle. Remove the cap, pull out the mouthpiece and enjoy the crisp and pure
tasting water!
4. Changing the lter cartridge
One lter can lter up to 200 liters of tap water. To ensure optimal ltration
and hygiene, it is recommended to replace the lter every 4 weeks. To do this,
repeat step 2.
05
Fitness Filter

Caution
- GoZero™ Active bottle may only be used with municipally treated ambient tap
water (5℃to 38℃), which is safe to drink according to legal regulations.
- The Adventure lter is compatible with the GoZero™ Active bottle. If you plan
to switch back to the Fitness lter after using the Adventure lter, make sure to
thoroughly clean the entire bottle rst.
- Consume the water in the bottle within 24 hours.
- Do not ll the bottle with water that is microbiologically unsafe or of unknown
quality without adequate disinfection.
- When not using your GoZero™ Active bottle for a longer period of time, the bottle
should be disassembled and stored completely dry. If it hasn't been used for
more than 2 days, rinse the lter under tap water for 1 minute; if it hasn't been
used for more than 7 days, the lter should be replaced.
- Always store spare lters in a cool, dry place and ensure
that they are tightly sealed.
06

Guarantee & Service
If you need information or if you have any problems, please visit the Philips
website at www.philips.com/water or contact the consumer care center in your
country. If there is no consumer care center in your country, go to the local dealer.
07