Philips GreenUp Wellglass BY200P Series User guide

GreenUp Wellglass/ LED平台灯
BY200P
Mounting instruction/ 安装说明
4441 700 95311
Philips (China) Investment Co., Ltd.
Address: No. 1602-1605, No. 218 Tianmu W Rd, Shanghai
Postalcode: 200070
飞利浦（中国）投资有限公司
地址：中国上海市天目西路218号1602-1605
邮编：200070
IP65
Product Type
产品型号
CCT
色温
Power
系统功率
BY200P LED12 B-W/CW PSU
BY200P LED12 B-W/NW PSU
BY200P LED25 B-W/CW PSU
BY200P LED25 B-W/NW PSU
BY200P LED12 L-B/CW PSU
BY200P LED12 L-B/NW PSU
BY200P LED25 L-B/CW PSU
BY200P LED25 L-B/NW PSU
BY200P LED40 L-B/CW PSU
BY200P LED40 L-B/NW PSU
6500K
4000K
6500K
4000K
6500K
4000K
6500K
4000K
6500K
4000K
15W
27W
15W
27W
38W
Dimension
尺寸D*W*H（mm）
ø215×218×174
ø215×218×205
ø215×218×255
Optics
配光
Batwing/
蝙蝠翼型
Lambertian/
朗伯型
Lambertian/
朗伯型
2.5
2.3
2.7
50/60
Hz
Accessory
选配件
BY200Z MB/支架组件
BY200Z WG/防护网组件
BY200Z MB/支架组件
BY200Z WG L/防护网组件
H
D
W
H
1Mounting/灯具安装
Mounting hole/安装孔位
Bracket Mounting/支架安装
WF2
4. Lock screws with Allen key-5
用内六角扳手GB/T5356-5锁紧螺钉
8Nm
Bracket mounting is used for indoor only
支架安装仅限室内使用
3. Adjust the mounting angle
调整至需要的角度
2. Mounting the bracket kit
安装支架套件
Housing/壳体
Tooth washer/齿形垫圈D6
Bracket/支架
Flat washer/平垫圈D6
Spring washer/弹簧垫圈D6
Screw/内六角螺钉M6
160º
1. Mounting the grommet to the
screw hole
安装橡胶塞至完全堵塞螺纹孔
120
Ø10.5 Ø10.5
S.Cx
0.03㎡3~5m
444170095312

1. Please read this manual carefully before using the product. Please keep the manual for reference later.
使用本产品前，请先仔细阅读本手册，请保留本手册作为日后参照用。
2. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national
requirements.
灯具应由有资格的电工安装，接线要符合IEE电气标准或国家标准。
3. The luminaire must not be used at explosive atmosphere or explosive dust.
灯具不能用于爆炸性气体或粉尘环境。
4. The luminaire is designed for resisting wind force under unexpected condition. The luminaire shall not be used as floodlight, and the
photometric of the luminaire is not designed for floodlighting.
本灯具结构设计为在非预期的使用条件下，可以抵抗风力造成的安全隐患，但不能把本系列灯具用作投光灯具，且本灯具的配光
设计并不具有投光灯效果。
5. The cable of the luminaire should use “Z” type connection. The luminaire has to be scrapped if the wire broken.
灯具电源线使用Z型连接，电源线不可更换，损坏则灯具报废。
6. Please replace any cracked safety screen.
灯具钢化玻璃保护屏碎裂时请立即更换。
7. In order to ensure optimum performance, please clean the luminaire regularly (recommended twice a year). When cleaning the luminaire,
please use soft cotton cloth only.
为了保持灯具明亮效果，请定期（半年一次）进行清洁。灯具不洁处需擦拭时，请用柔软布料擦拭。
Cable Connection/导线连接
G3/4''
G3/4''
20~25mm
Pipe dimension/
铁管尺寸
Pipe Mounting/管装
（The pipe is not provided/
铁管不提供）
1. Must to be
mounted to the end
铁管必须安装到位
2. Lock the screw
with Allen key-2
用内六角扳手GB/T
5356-2锁紧螺钉
2.5Nm
WG Mounting/防护网安装
（Optional accessory /选配件）
Please use IP65 or above cable connection box. It is not
provided by Philips.The inside of the cable connection box
shoud have fixed device of wire
请使用IP65以上的接线盒，飞利浦不提供接线盒。接线
盒内部应有固定导线的装置
Power Cable / 外部接线:
60245IEC57 3×1.0~1.5mm2
外部3芯线定义如下：
棕Brown –L
黄绿YellowGreen –G
蓝Blue –N
40
28 7
6-13
3×1mm2
Connect to customer’s cable connection box.
连接至客户的接线盒
2
3