Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • B1008
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan Track Lighting LCAWTSB
Page 1 of 2 ColorSpot 4-Button Low Voltage LED
2-1/8"
(55.0mm)
11-3/4"
(297.2mm)
8-3/8"
(213.5mm)
4-1/4"
(176.4mm)
4"
(100.1mm)
5-3/8"
(135.4mm)
2"
(49.5mm)
2
4
1
5
7
12
10,11
9
14,15
17
16
3
13
6
12-3/4"
(325.2mm)
3-1/2"
(87.5mm)
Features
1. Lytespan Attachment Fitting: Molded polycarbonate. Integral color.
Rotate into track for mechanical/electrical connection.
2. Moveable Contact: Solid brass. Extend, for connection to 2nd circuit in
Advent track.
3. Ground Contact: Solid brass
4. Polarity Keyway
5. Push Lever: Die-casted. Engages unit to track.
6. Locking Lever: 24 gauge spring steel. For mechanical connection to track.
7. 4-Button Controller: 4 button interface allows preset values to be selected
by scrolling through them in order or in reverse order (2 buttons) and to vary
the intensity up and down (2 buttons). Molded polycarbonate dark grey color
with light grey pict-o-grams.
8. Synchronizer: Printed circuit board (PCB) mounted. 120V input, with a
sensitive capter and hearing captation for the 4-button controller.
9. Thermal Management System: Keeps the LED at appropriate temperature.
10.PSU Housing/Cover: Die-cast aluminum
11. Power Supply Unit: High power factor solid state unit. Thermally protected,
Class 2.
12.Pivot Mounting: Die-cast aluminum. Permanently tensioned. 300° horizontal
rotation and 180° vertical adjustment.
13.Arm Housing/Cover: Die-cast aluminum. Hides leads.
14.LED Housing: 24 gauge steel. 4 slots and a perforated back for ventilation to
keep diodes cooler.
15.6-Cluster LED: 6 clusters of 4 lighting emission diodes (LED) mounted
in circle with the optic placed in front of light emitting region produce a
maximum optical intensity (20° of diffusion) of the LEXEL™. The Thermal
Management Systems keep the temperature as low as possible.
Features (continued)
16.Mounting Belt: Die-cast aluminum. 4 slots for ventilation and mounting
of spot components.
17. Accessory Cartridge: Die-cast aluminum. Captive; retaining ring included.
To hold diffusers.
Dimming
Not compatible w/dimmers.
Finish
All painted finishes are baked powder or enamel.
Labels
cULus, Certified for dry locations only.
Catalog No. Finish Specifications Mounting
LCAWTSBWH
LCAWTSBBK
LCAWTSBAL
White
Black
Aluminum
120V - 60Hz Monopoint/Multipoint
Basic, Radius, Advent Track Ceiling
Stem Mounted Track
Extension Wands/Slope Ceiling Adapter
Recessed Track
ProSpec Track
No
Yes
Yes
No
Yes
No
