Philips BTB2470 User manual

www.philips.com/support
BTB2470
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips

1EN
Contents
1 Important 2
Safety 2
2 Your micro system 3
Introduction 3
What's in the box 3
Overview of the main unit 4
Overview of the remote control 5
3 Get started 7
Connect FM antenna 7
Connect power 7
Prepare the remote control 7
Set clock 7
Turn on 8
4 Play 9
Play from disc 9
Play from USB 9
Control play 9
Skip to a track 10
Program tracks 10
Play from Bluetooth-enabled devices 10
5 Listen to the radio 12
Listen to DAB+ radio 12
Listen to FM radio 13
6 Adjust sound 15
Select a preset sound effect 15
Adjust volume level 15
Mute sound 15
7 Other features 16
Set the alarm timer 16
Set the sleep timer 16
Listen from an external device 16
Listen through a headphone 17
Adjust the display brightness 17
8 Product information 18
Specications 18
USB playability information 19
Supported MP3 disc formats 19
RDS program types 20
9 Troubleshooting 21
10 Notice 23
Declaration of conformity 23

2EN
1 Important
Safety
• Make sure that there is enough free space
around the product for ventilation.
• Only use attachments or accessories
speciedbythemanufacturer.
• Battery usage CAUTION –To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
product:
• Install the battery correctly, + and - as
marked on the product.
• Remove the battery when the product
is not used for a long time.
• The battery shall not be exposed to
excessiveheatsuchassunshine,reor
the like.
• The product shall not be exposed to
dripping or splashing.
• Do not place any sources of danger on the
product(e.g.liquidlledobjects,lighted
candles).
• Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
• Never remove the casing of this device.
• Never lubricate any part of this device.
• Never place this device on other electrical equipment.
• Keep this device away from direct sunlight, naked
amesorheat.
• Never look into the laser beam inside this device.
• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
Hearing safety
Caution
• To avoid hearing damage, limit the time you use the
headphones at high volume and set the volume to a
safe level.The louder the volume, the shorter is the safe
listening time.
Be sure to observe the following guidelines
when using your headphones.
• Listen at reasonable volumes for
reasonable periods of time.
• Be careful not to adjust the volume as your
hearing adapts.
• Do not turn up the volume so high that
you can't hear what's around you.
• You should use caution or temporarily
discontinue use in potentially hazardous
situations.
• Excessive sound pressure from earphones
and headphones can cause hearing loss.

3EN
2 Your micro
system
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
• enjoy audio from discs, Bluetooth-enabled
devices, USB storage devices, or other
external devices;
• listen to Digital Audio Broadcasting (DAB)
or FM radio stations.
You can select one of the following sound
effects:
• Balanced,Warm, Bright, Clear, and
Powerful
The unit supports these media formats:
What's in the box
Check and identify the contents of your
package:
• Main unit
• 1 x FM wire antenna
• Remote control (with one AAA battery)
• Short User Manual
• Safety sheet
• Wall mounting sheet

4EN
Overview of the main unit
a
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
b SOURCE
• Press to select a source: DISC, USB,
DAB,TUNER, BT, AUDIO IN.
c /PAIRING
• Start, pause, or resume play.
• In Bluetooth mode, press and hold for
3 seconds to enter pairing mode.
d
• Stop play or erase a program.
g
h
i
j
k
abc
de
l
m
n
o
f
e
• USB socket.
f Disc compartment
g
• Open/close the disc compartment.
h /
• Skip to the previous/next track.
• Search within a track/disc/USB.
• Tune to a radio station.
• Adjust time.
i VOL+/VOL-
• Adjust volume.
j Display panel

5EN
k FM ANT
• FM antenna socket.
l MICRO USB
• For DAB upgrade only.
m
• Headphone socket.
n AUDIO IN
• Audio input socket(3.5mm) for an
external audio device.
o DC IN 12V 2.5A
• Power socket.
Overview of the remote
control
a
• Turn the unit on or off.
• Switch to standby mode or Eco power
standby mode.
a
b
c
d
e
f
g
h
i
j
kl
m
n
o
p
q
r
b /PAIRING
• Press to select the BT (Bluetooth)
source.
• In Bluetooth mode with three
devices connected, press and hold
for3secondstodisconnecttherst
connected device and enter pairing
mode.
• In Bluetooth mode with one device
connected, press and hold for 3
seconds to enter pairing mode.
c USB/AUDIO IN
• Press repeatedly to select the USB or
AUDIO IN source.
d /
• Skip to the previous/next track.
• Search within a track/disc/USB.
• Tune to a radio station.
• Adjust time.
e OK
• Conrmtheselection.
• Switch between FM stereo and mono
broadcast.
f /MENU
• Stop play or erase a program.
• Access the DAB+ or FM menu.
g SOUND
• Select a preset sound effect.
h +/-
• Adjust volume.
i
• Mute or restore volume.
j PROG
• Program tracks.
• Program radio stations.
k CLOCK/SCAN
• Set the clock.
• View clock information.
• Scan FM or DAB+ radio stations.

6EN
l SLEEP/TIMER
• Set sleep timer.
• Set alarm timer.
m INFO
• Display the current status or disc
information.
• For selected FM radio stations, display
RDS information (if available).
n ALBUM/PRESET /
• Select a preset radio station.
• Skip to the previous/next album.
o MODE
• Selectrepeatorshufeplaymode.
p
• Start, pause, or resume play.
q DAB/FM
• Press repeatedly to select the DAB or
FM source.
r CD
• Select the DISC source.

7EN
3 Get started
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect FM antenna
• Connect the supplied antenna to this
device before listening to the radio.
Connect power
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the back
of the main unit.
• Risk of electric shock! Before you plug the AC power
adaptor, make sure that the adaptor plug converter is
xedsecurely.WhenyouunplugtheACpoweradaptor,
always pull the plug, never the cord.
• Before you connect the AC power adaptor, make sure
that you have completed all the other connections.
Prepare the remote control
Caution
• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To insert the remote control battery:
1 Open the battery compartment.
2 Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Set clock
1 In standby mode, CLOCK on the remote
control for 3 seconds.
» The [24H] or [12H] hour format is
displayed.
2 Press / to select the [24H] or
[12H] hour format.
3 Press CLOCKtoconrm.
» The hour digits are displayed and begin
to blink.

8EN
4 Press / to select hour and press
CLOCKtoconrm.
» The minute digits are displayed and
begin to blink.
5 Press / to select minute and press
CLOCKtoconrm.
» [SYNC ON] is displayed on the LCD
screen.
6 Press / to select whether to
synchronize the system clock with an
RDS radio station or a DAB+ station
that transmits time signals, and then press
CLOCKtoconrm.
Note
• If no button is pressed in 10 seconds, the system exits
clock setting mode automatically.
Tip
• You can press CLOCK to view clock information in
power-on mode.
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to standby
mode.
» The clock (if set) is displayed on the
panel.
Switch to ECO standby mode:
• Press and hold for more than 3 seconds.
» The display panel is dimmed.
Note
• The unit switches to Eco Power Standby mode after 15
minutes in standby mode.
To switch between standby mode and ECO
standby mode:
• Press and hold for more than 3 seconds.