Philips MCM148/96 User manual

Quick Start Guide
What’s in the Box?
You should nd these items upon opening the box.
MCM148
1
Quick Start Guide
2
User Manual
Quick Start Guide User manual
POWER
Remote Control
MCM148_96_QSG_V2.0_EN.indd 1 3/30/2010 2:44:27 PM
All manuals and user guides at all-guides.com
all-guides.com

1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the FM pigtail antenna since it
is xed to the main unit.
2
1
MCM148_96_QSG_V2.0_EN.indd 2 3/30/2010 2:44:28 PM
All manuals and user guides at all-guides.com

5
1
2
3
4
Setting the clock
In standby mode, press and hold CLOCK/DISPLAY on the
remote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
Press CLOCK/DISPLAY to conrm.
➜ The clock digits for the hours ash.
Press TUNING 4 ¢ (à/ áon the remote control)
to set the hours.
Press CLOCK/DISPLAY again.
➜ The clock digits for the minutes ash.
Press TUNING 4 ¢ (à/ áon the remote control)
to set the minutes.
Press CLOCK/DISPLAY to conrm the time.
6
7
POWER
Enjoy
C
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
POWER
MCM148_96_QSG_V2.0_EN.indd 3 3/30/2010 2:44:28 PM
All manuals and user guides at all-guides.com

C 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
http://www.philips.com
MCM148_96_QSG_V2.0
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
1
2
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
in order of waveband.
Press ALBUM/PRESET +/- until the desired preset station is displayed
Programming and tuning to radio stations
3
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (DISC
or AUX, for example).
– Then select the desired function ( 2;,
í, ë for example).
Enjoy
C
MCM148_96_QSG_V2.0_EN.indd 4 3/30/2010 2:44:28 PM
All manuals and user guides at all-guides.com