Philips PET738 User manual

4.1 Charge the DVD player
Plug in the AC/DC adaptor
• The RED LED indicates
that charging is in progress.
When the set is not in use, it
will take about 4 hours to
fully charge it. However, when in use, it will take more than 8
hours to fully charge it.*
• The RED LED will turn off when the set is fully charged. When
the low battery icon appears on the screen, please charge the
player.
* Rechargeable batteries have a limited number of charge cycles
and may eventually need to be replaced. Battery life and number of
charge cycles vary by use and settings.
4.2 Powering your remote control
1Open the battery compartment. Remove the
protective plastic tab (first time users only).
2Insert 1 x lithium 3V battery, type CR2025, then
close the compartment.
User manual
Guide d’utilisateur
Manual del usuario
Benutzerhandbuch
PET730
PET732
Portable DVD player
1
Printed in China wk7065
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V.
or their respective owners
2007 © Koninklijke Philips Electronics N.V. All rights reserved.
English
1 Control elements and functional components
5 Start up
2 Introduction
4 Charging the units
3 General information
1.1 Main unit controls (see figure 1)
1 OPEN Open disc door to insert or remove disc
2 POWER Switch the player on / off
39Press once to stop playback and store the stop
position. Press twice to stop playback completely.
2; Start / pause / resume playback
4J( / )K Search backward (J() or search forward ()K)
5
- VOL + Volume control
6 OPTION Access additional functions
MENU Display MENU page
73, 4, 1, 2Up / down / left / right cursor
OK Confirm selection
1.2 Front of player (see figure 1)
8 POWER/ IR /CHR
Power / Remote sensor / charging indicator
1.4 Right of player (see figure 1)
9 PHONE 1 & 2 Headphones jack
10 AV OUT Audio/Video output
11 AV IN Audio video input
12 USB USB connector
13 COAXIAL Digital audio output
14 DC IN 9V Power supply socket
1.5 Back of the player (see figure 1)
15 Reset Reset the player when it is hanged up
16 Car mounting screw hole
1.6 Remote Control (see figure 2)
1 MENU Display MENU page
23, 4, 1, 2Up / down / left / right navigation key
OK Confirm selection
VOL+ / -Volume control
3 DISPLAY Adjust the display value of the system
4J( Skip to previous chapter, track or title
52; Start / pause / resume playback
69Press twice to stop playback
70- 9Numeric keypad
8
SUBTITLE Subtitle language selector
9 RETURN For VCD menu page
10 A - B To repeat or loop a sequence in a title
11 SETUP Enter SETUP menu
12 OPTION Access additional functions
13 )K Skip to next chapter, track or title
14 sMute player volume
15 AUDIO Audio language selector
16 ZOOM Enlarge video image
2.1 Your portable DVD player
Your portable DVD player plays digital video discs conforming to
the universal DVD Video standard. With it, you will be able to
enjoy full-length movies with true cinema picture quality, and
stereo or multichannel sound (depending on the disc and on your
playback set-up).
The unique features of DVD-Video, such as selection of soundtrack
and subtitle languages, and of different camera angles (again
depending on the disc), are all included.
What’s more, parental lock lets you decide which discs your
children will be able to see. You will find your player remarkably
easy to use with the On-Screen Display and player display in
combination with the remote control.
2.2 Unpacking
First check and identify the contents of your package, as listed
below:
• Portable DVD player • Remote Control (AY5507)
• Car adaptor (12V) (AY4115) • AC power adaptor (AY4117)
• User manual
• Car headrest mounting kit (AY4246)
2.3 Placement
• Place the player on a firm, flat surface.
• Keep away from domestic heating equipment and direct sunlight.
• If the player cannot read CDs/DVDs correctly, try using a
commonly available cleaning CD/DVD to clean the lens before
taking the player to be repaired. Other cleaning methods may
destroy the lens.
• Always keep the disc door closed to avoid dust on the lens.
• The lens may cloud over when the player is suddenly moved
from cold to warm surroundings. It is then not possible to play a
CD/DVD. Leave the player in a warm environment until the
moisture evaporates.
2.4 Playable disc formats
In addition to DVD-Video disc, you will also be able to play all
Video CDs, CDs, CDR, CDRW,DVD±R and DVR±RW.
2.4.1 DVD-Video
Depending on the material on the disc (a movie, video
clips, a drama series, etc.) these discs may have one or
more Titles, and each Title may have one or more Chapters. To
make access easy and convenient, your player lets you move
between Titles, and also between Chapters.
2.4.2 Video CD
Depending on the material on the disc (a movie, video
clips, a drama series, etc.) these discs may have one or
more Tracks, and tracks may have one or more indexes,
as indicated on the disc case.To make access easy and convenient,
your player lets you move between tracks and between indexes.
2.4.3 Audio CD / MP3 CD / WMA CD
Audio CDs / MP3 CD / WMA CD contain music tracks
only. You can play them in the conventional way
through a stereo system using the keys on the
remote control and/or main unit, or via the TV
using the On Screen Display (OSD).
2.4.4 CD with JPEG files
You can also view JPEG still photos on this player.
2.4.5 DivX video discs
DivX is a popular media technology created by DivX, Inc.
DivX media files contain highly compressed video with
high visual quality that maintains a relatively samll file size. DivX
files can also include advanced media features like menus, subtitles,
and alternate audio tracks. Many DivX media files are available for
download online, and you can create your own using your personal
content and easy-to-use tools from DivX.com.
2.5 Zero Bright DotTM
Enjoy highest-quality images that are free from annoying
blank spots on the LCD screen. LCD displays commonly have
imperfections, termed as 'bright dots' by the LCD industry. A
limited number of bright dots were once considered an inevitable
side effect of LCD mass production. With Philips' strict quality
control procedures used in our Portable DVD Players, our LCD
displays are produced with zero tolerance for bright dots. Select
Portable DVD Players come with Philips Zero Bright DotTM Policy
to guarantee optimal screen quality.
Warranty service varies from region to region. Contact your local
Philips representative for more detailed information.
1 Control elements
and functional
components
1.1 Main unit controls
1.2 Front of player
1.4 Right of player
1.5 Back of the player
1.6 Remote Control
2 Introduction
2.1 Your portable DVD
player
2.2 Unpacking
2.3 Placement
2.4 Playable disc formats
2.4.1 DVD-Video
2.4.2 Video CD
2.4.3 Audio CD / MP3 CD /
WMA CD
2.4.4 CD with JPEG files
2.4.5 DivX video discs
2.5 Zero Bright DotTM
3 General information
4 Charging the units
4.1 Charge the DVD player
4.2 Powering your remote
control
5 Start up
5.1 Setup
5.2 Playback DVD
5.3 Playback VCD
5.4 Playback Super (S)-VCD
5.5 Playback Music CD
5.6 Playback Music
MP3/WMA-CD
5.7 Playback Picture-CD
5.8 Playback from USB
6 Addition Functions
6.1 DISPLAY Menu
6.2 Connection
6.2.1 Headphone
6.2.2 TV
6.2.3 AV input
6.2.4 USB
6.2.5Coaxial
7 Troubleshooting
8 Technical data
Content
Power Sources
This unit operates on a supplied AC adaptor, car adapter, or a
rechargeable battery pack.
• Make sure that the input voltage of the AC adaptor is in line
with the local voltage. Otherwise, the AC adaptor and unit may
be damaged.
• Do not touch the AC adaptor with wet hands to prevent
electric shock.
• When connecting with car power (cigarette lighter) adaptor, be
sure the input voltage of the adaptor is identical with car voltage.
• Unplug the AC adaptor from the outlet or remove the battery
pack when the unit is not used for long periods of time.
• Hold the plug to disconnect the AC adaptor. Do not pull the
power cord.
Safety and maintenance
• Do not disassemble the unit for laser rays are dangerous to
eyes.
Any service should be done by qualified service personnel.
• Unplug the AC adaptor to cut the power if liquid or objects get
inside the unit.
• Take care not to drop the unit or subject it to strong shocks,
which may cause malfunction.
Hearing Safety
Listen at a moderate volume.
• Using headphones at a high volume can impair your
hearing. This product can produce sounds in decibel
ranges that may cause hearing loss for a normal person,
even for exposure less than a minute. The higher decibel ranges
are offered for those that may have already experienced some
hearing loss.
• Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So after prolonged listening,
what sounds “normal” can actually be loud and harmful to your
hearing. To guard against this, set your volume to a safe level
before your hearing adapts and leave it there.
To establish a safe volume level:
• Set your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, without distortion.
Listen for reasonable periods of time:
• Prolonged exposure to sound, even at normally “safe” levels,
can also cause hearing loss.
• Be sure to use your equipment reasonably and take appropriate
breaks.
Be sure to observe the following guidelines when using
your headphones.
• Listen at reasonable volumes for reasonable periods of time.
• Be careful not to adjust the volume as your hearing adapts.
• Do not turn up the volume so high that you can’t hear what’s
around you.
• You should use caution or temporarily discontinue use in
potentially hazardous situations.
• Do not use headphones while operating a motorized vehicle,
cycling, skateboarding, etc.; it may create a traffic hazard and is
illegal in many areas.
• Important (for models with by-packed headphones): Philips
guarantees compliance with the maximum sound power of its
audio players as determined by relevant regulatory bodies only
with the original model of provided headphones. In case this one
needs replacement, we recommend that you contact your
retailer to order a model identical to that of the original
provided by Philips.
• Traffic safety: do not use while driving or cycling as you may
cause an accident.
• Do not expose to excessive heat caused by heating equipment
or direct sunlight.
• This product is not waterproof: do not allow your player to be
submersed in water. Water entering the player may cause major
damage.
• Do not use any cleaning agents containing alcohol, ammonia,
benzene, or abrasives as these may harm the player.
• Apparatus shall not be exposed to dripping or splashing. Do not
place any sources of danger on the appartus (e.g. liquid filled
objects,lighted candles)
• Do not touch the lens!
Handling discs
• Do not attach paper or tape to the disc.
• Keep the disc away from direct sunlight or
heat sources.
• Store the disc in a disc case after playback.
• To clean, wipe the disc outwards from the
center with a soft, lint-free clean cloth.
On handling the LCD screen
The LCD is manufactured using high precision technology. You may,
however, see tiny black points that continuously appear on the
LCD. This is a normal result of the manufacturing process and does
not indicate a malfunction.
Environmental information
We have reduced the packaging to its minimum and made it easy
to separate into mono materials: cardboard, PS, PE and PET.
Your set consists of material which can be recycled if disassembled
by a specialized company. Please observe the local regulations to
dispose of packaging, exhausted batteries and old equipment.
Copyright information
“DivX, DivX” Certified, and associated logos are trademarks of
DivX, Inc. and are used under license.”
All other brand and product names are trademarks of their
respective companies or organizations.
Unauthorized duplication of any recordings downloaded from the
internet or made from CDs / VCDs / DVDs is a violation of
copyright laws and international treaties.
The Windows Media and the Windows logo are registered trademarks
of Microsoft Corporation in the United States and/or other countries.
When the player is in use for a long period of time, the
surface will be heated. This is normal.
CAUTION Use of controls or adjustments or performance
of procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Please always use supplied AC/DC adaptor (AY4129)
WARNING Under no circumstances should you try to
repair the set yourself as this will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the
set for repair. If you are unable to solve a problem by
following these hints, consult your dealer or service centre.
The video input devices, such as video amplifier, digital video
recorder, digital camera should have the RCA output
connection on the device. If you device does not have the
RCA output, please consult your dealer.
CAUTION
• Batteries contain chemical substances, so they should be
disposed of properly.
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Incorrect use of batteries can cause electrolyte leakage and
will corrode the compartment or cause the batteries to
burst.
• Remove the batteries if the set is not to be used for a long
time.
• Perchlorate Material – special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Transfering and recording of data from the DVD to the USB
port is not possible.
5.1 Setup
1Press SETUP. A list of features is shown.
2Use 3/ 4to highlight your selection.
3Use J( or )K to enter a sub-menu
4Use the navigation keys to highlight your desired setting and
press OK to confirm.
5The SETUP menu includes:
General
Language Set On Screen Display (OSD) languages
PBC settings Set Playback Control function ON/OFF. This
feature is available for Super VCD.
Power save Set Power Saving mode ON/OFF
DivX (VOD) Get the DivX (Video-On-Demand) code
Parental Set parental options
5The following functions are available during playback:
Pause Press 2; to pause playback. You can resume
playback by pressing 2; again
Previous/NextBriefly press J( or )K once or several times to
select your desired track
Rotate Press OPTIONS key to select rotate mode.
Then, use 1to rotate the picture clockwise.
Use 2to rotate the picture anti-clockwise.
Press OPTIONS key to exit rotate mode.
Zoom Zoom in the screen, and then use the
navigation keys to pan the screen. The function
is available by pressing either the ZOOM or
OPTIONS key
Stop Briefly press 9on the right side of the player to
stop playback
6At the end of the playback, press 9 / to eject the disc from the
player.
5.8 Playback from USB
This USB port supports the playback of JPEG / MP3 / WMA /
DivX / MPG-4 files.
8 Technical data
Dimensions 20.4 x 16.8 x 3.3 cm
8.0 x 6.6 x 1.3 inches
Weight 1.0 kg / 2.19 lb
Power supply DC 9V 1.8A
Power Consumption ≤20W
Operating temperature range
0 - 50°C (32 - 122°F)
Laser wavelength 650nm
Video system NTSC / PAL / AUTO
PHILIPS reserves the right to make design and specification
changes for product improvement without prior notice.
Modifications not authorized by the manufacturer may
void users authority to operate this device.
All rights reserved.
1Briefly press POWER on the main control of the player to
switch on the set.
2Insert a USB flash drive or USB memory card reader into the
USB port.
The USB plug-in storage only support Mass Storage (MSC)
device. It does not support support Hard Disk USB storage
device and storage in MTP (Music Transfer Protocol) format.
3The player will browse and show the contents in the USB flash
device automatically.
The DVD player will take some time to browse the content of
your USB flash drive. The browsing time will vary for memory
capacity and the number of content in your USB drive.
To deactivate the USB browser or want to switch to DVD
playback, simply unplug the USB connection.
4Use navigation keys to select the file you want to access, then
press OK to play it.
5At the end of the playback, unplug the USB flash drive or USB
memory card from the player
6 Addition Functions
6.1 DISPLAY Menu
When you press DISPLAY during playback, the following menu
will appear and you can access the corresponding function and
information:
Brightness It allows you to adjust the brightness of the
screen
Contrast It allows you to adjust the contrast of the
screen
Color It allows you to adjust the color of the screen
from cool, warm and normal.
Turn off LCD You can turn off the screen in some situations,
such as when connected to TV or playing music
discs. This can save the battery power
Battery level It shows the battery level
6.2 Connection
6.2.1 Headphone
Connect the headphone to either one of the headphone jacks on
the side of the player.
6.2.2 TV
You can connect the player to a TV and enjoy your DVD.
6.2.3 AV input
You can connect to other devices such as Digital Video Recorder,
Digital Camera, etc.
White
Red
Yellow
White
Red
Yellow
7 Troubleshooting
If it appears that the DVD-Video player is faulty, first consult this
checklist. It may be that something has been overlooked.
Symptom Remedy
Completely distorted
picture / no colour in
the TV screen
The NTSC/PAL setting may be in the
wrong status. Match your TV’s setting with
the player’s setting.
No sound Check audio connections. If using a HiFi
amplifier, try another sound source.
Disc can’t be played • Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying
another disc.
The player does not
respond to the remote
control
Aim the remote control directly at the
sensor on the front of the player. Avoid all
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
Distorted or B/W
picture with DVD Use only discs formatted according to the TV-set used (PAL/NTSC).
No audio at digital
output • Check the digital connections.
Player does not
respond to all
operating commands
during playback
• Operations are not permitted by the
disc.
• Refer to the instructions in the disc
inlay.
Cannot detect USB
plug-in • Unplug the USB connection and plug-in again. Detection may take some time
that vary with the capacity of your USB
device.
• The DVD player only support Mass
Storage (MSC) format from USB flash
drive.
• The DVD player does not support Hard
Disk storage or Media Transfer
Protocol (MTP) format.
Cannot switch to AV-
in or no signal • Unplug the AV-in connection and plug-in again.
• Check the connection from the AV
output device, such as digital camera,
video recorder, etc.
• Use the provided AV cable for
connection.
Switch between
DVD/USB/AV-in • DVD mode is default source during the DVD player power on.
• Plug in USB will activate USB mode.
Deactivate it by unplug the connection.
• Plug in AV-in will activate AV-in mode.
And deactivate it by unplugging the
connection.
• Do not plug-in USB & AV-in at the same
time. Plug-in one type connection at a
time only.
• Unplug the connection before you plug-
in another connection.
Player feels warm When the player is in use for a long period
of time, the surface will be heated.
This is normal.
Display goes dimmer
when AC is unplugged
The unit is saving power to ensure longer
playtime with battery. It is normal.
Adjust the brightness in the SETUP menu.
Symptom Remedy
No power • Check if both plugs of the mains cord
are properly connected.
• Check if there is power at the AC
outlet by plugging in another appliance.
• Check if battery pack is inserted
appropriately.
• Check if car adaptor is connected
appropriately.
Distorted picture • Check the disc for fingerprints and clean
with a soft cloth, wiping from centre to
edge.
• Sometimes a small amount of picture
distortion may appear. This is not a
malfunction.
This set complies with the radio interference requirements of the
European Union.
Copyright information
The making of unauthorized copies of copy-protected material,
including computer programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute a
criminal offence. This equipment should not be used for such
purposes.
Disposal of your old product
Your product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
When this crossed-out wheeled bin symbol is attached
to a product, it means the product is covered by the
European Directive 2002/96/EC.
Please be informed about the local separate collection system for
electrical and electronic products.
Please act according to your local rules and do not dispose of your
old product with your normal household waste. The correct
disposal of your old product will help prevent potential negative
consequences to the environment and human health.
2
2
5
3
4
1
6
7
8
9
10
11
12
13
14
15
16
1
2
3
7
4
8
9
5
6
10 11 12 13 14
15 16
Set password Change password (default: 9999)
Factory settings Restore factory settings
Video
TV Display Set screen display aspect ratio
TV standard Set video output format to TV system
Mpeg 4 subtitle Select subtitle language for Mpeg 4 video, e.g.
DivX video
Audio
Dolby Set Dolby output
Digital (SPDIF) Set digital output format
5.2 Playback DVD
1Briefly press POWER on the main control of the player to
switch on the set.
2Open the disc door and insert the disc.
3The player will start to play the disc automatically.
4Use navigation keys 1, 2, 3, 4to select an item from the DVD
disc menu, such as play now, select languages and subtitle.
5The following functions are available during playback:
Pause Press 2; to pause playback. You can resume
playback by pressing 2; again
Previous/NextBriefly press J( or )K once or several times to
select your desired chapters
Fast backward / Fast forward
Keep pressing J( or )K will search in fast
speed, 2X, 4X, 6X… Then, press 2; to resume
normal playback
Volume Control
Press 3or 4briefly or repeatedly to increase
or decrease the sound volume
Stop Briefly press 9on the right side of the player to
stop playback
Subtitle Change subtitle display. The function is available
by pressing either the SUBTITLE or
OPTIONS key
Language Change language. The function is available by
pressing either the AUDIO or OPTIONS key
Angle Change the viewing angle provided in the DVD
disc. The function is available by pressing the
OPTIONS key.
Zoom Zoom in the screen, and then use the
navigation keys to pan the screen. The function
is available by pressing either the ZOOM or
OPTIONS key
A-B Repeat Set repeat loop playback. Press A-B to set the
starting point and press A-B again to set the
ending point. Then, the player will repeat the loop
playback. Press A-B to cancel the loop playback
5.3 Playback VCD
1Briefly press POWER on the main control of the player to
switch on the set.
2Open the disc door and insert the disc.
3The set will start to play the disc automatically.
4The following functions are available during playback:
Pause Press 2; to pause playback. You can resume
playback by pressing 2; again
Previous/NextBriefly press J( or )K once or several times to
select your desired track
Fast backward / Fast forward
Keep pressing J( or )K will search in fast
speed, 2X, 4X, 6X or 8X. Then, press 2; to
resume normal playback
Volume Control
Press 3or 4briefly or repeatedly to increase
or decrease the sound volume
Stop Briefly press 9on the right side of the player to
stop playback
Audio Some VCDs only contain 2 languages for
selection. You can change the language using this
function. The function is available by pressing
either the AUDIO or OPTIONS key
Zoom Zoom in the screen, and then use the
navigation keys to pan the screen. The function
is available by pressing either the ZOOM or
OPTIONS key
A-B Repeat Set repeat loop playback. Press A-B to set the
starting point and press A-B again to set the
ending point. Then, the player will repeat the
loop playback. Press A-B to cancel the loop
playback
5.4 Playback Super (S)-VCD
(Super) Video CDs may feature PBC (Play Back Control). This
allows you to play the video CDs interactively, following the menu
on the display.
1Briefly press POWER on the main control of the player to
switch on the set.
2Insert the (S)VCD into the disc slot on the right side of the player.
If PBC is on, the disc index menu will appear on the screen.
3Use numeric keypad 0-9 to input your selection or select a play
option.
4Press RETURN on the remote control to return to the
previous menu.
5To turn Playback Control mode on/off, please go to SETUP
and select PBC settings.
5.5 Playback Music CD
1Briefly press POWER on the main control of the player to
switch on the set.
2Open the disc door and insert the disc.
3The set will start to play the disc automatically.
4The following functions are available during playback:
Pause Press 2; to pause playback. You can resume
playback by pressing 2; again
Previous/NextBriefly press J( or )K once or several times to
select your desired track
Fast backward / Fast forward
Keep pressing J( or )K will enter the fast
search mode. Then, press brief will change the
searching speed to 2X, 4X, 6X, 8X, 16x or 32x.
Volume Control
Press 3or 4briefly or repeatedly to increase
or decrease the sound volume
Repeat Press OPTIONS key to select Repeat 1 track
or Repeat all tracks
Shuffle Press OPTIONS key to turn shuffle playback
on or off
Stop Briefly press 9on the right side of the player to
stop playback
5.6 Playback Music MP3/WMA-CD
1Briefly press POWER on the main control of the player to
switch on the set.
2Open the disc door and insert the disc.
3The set will start to play the disc automatically.
4Use navigation keys to select the folder and MP3/WMA file to
be played.
5The following functions are available during playback:
Pause Press 2; to pause playback. You can resume
playback by pressing 2; again
Previous/NextBriefly press J( or )K once or several times to
select your desired track
Fast backward / Fast forward
Keep pressing J( or )K will search in fast
speed, 2X, 4X, 6X or 8X. Then, press 2; to
resume normal playback
Volume Control
Press 3or 4briefly or repeatedly to increase
or decrease the sound volume
Repeat Press OPTIONS key to select Repeat 1 track
or Repeat all tracks
Shuffle Press OPTIONS key to turn shuffle playback
on or off
Stop Briefly press 9on the right side of the player to
stop playback
5.7 Playback Picture-CD
The player can only read pictures in JPEG format.
1Briefly press POWER on the main control of the player to
switch on the set.
2Open the disc door and insert the disc.
3The set will start to play the disc automatically.
4Use navigation keys to select the folder and JPEG file to be played.
6.2.4 USB
You can plug in the USB flash drive to view the stored pictures and
video.
1After plug in the USB flash drive, the DVD player will browse
the content of your USB drive automatically.
2See section 5.8 Playback from USB for playback details.
3Unplug the USB drive after enjoyment. This will also deactivate
the USB browser function.
6.2.5Coaxial
It provides digital audio output signal that you can connect to your
home theater equipment to decode the digital audio signal.
Yellow

4.1 为DVD 播放器充电
插上直流/交流适配器
•RED (红色) 的LED 表
示充电正在进行。设备未
使用时，完全充电大约需
要4个小时。然而当设备
在使用中时，完全充电大约需要 8个小时。*
•设备完全充电后，RED (红色) 的LED
将熄灭。当屏幕上出现低电量图标时，请为播放器充电。
*可充电电池的充电循环次数有一定的数量限制并最终需要更
换。电池寿命和充电循环次数因使用方式和设定而不同。
4.2 开启您的遥控器
1打开电池盒。移除保护塑料片(仅第一次使
用时)。
2插入一枚型号为 CR2025 的3V锂电池，
然后关上电池盒。
用户手册
Guide d’u ilisa eur
Manual del usuario
Benu zerhandbuch
PET730
PET732
便携式 DVD 播放器
1
中国印刷
wk7065
规格更改恕不另行通知。
商标为荷兰皇家飞利浦电子股份有限公司或其各自所有者的专有财产。
2007 荷兰皇家飞利浦电子股份有限公司。版 所有。
中文
1控制元件和功能组件
5启动
2介绍
4装置充电
3一般信息
1.1 主要单元控制键 (参见图 1)
1 PEN (打开)打开光盘门插入或取出光盘
2 P WER (电源)开启 / 关闭播放器
39按键一次停止播放并存储停止
位置。按键两次完全停止播放。
2; 开始 / 暂停 / 继续播放
4J( /)K 向后搜索 (J()或向前搜索 ()K)
5
- V L + 音量控制
6 PTI N (选项)进入附加功能
MENU (菜单)显示 MENU (菜单)页
73,4,1,2上 / 下 / 左/ 右光标
K (确认)确认选择
1.2 播放器正面 (参见图 1)
8 P WER/IR/CHR (电源/远程感应器/充电)
电源 / 远程感应器 / 充电显示灯
1.4 播放器右侧 (参见图 1)
9 PH NE 1 & 2 耳机插孔
10AV UT (音频/视频输出)音频/视频输出
11AV IN (音频/视频输入)音频/视频输入
12USB USB 连接器
13C AXIAL (同轴插孔)数字音频输出
14DC IN 9V (直流输入 9V)电源插座
1.5 播放器背面 (参见图 1)
15重启 停机时重启播放器
16汽车安装螺钉孔
1.6 遥控器 (参见图 2)
1 MENU (菜单)显示 MENU (菜单) 页
23,4,1,2上 / 下 / 左/ 右导航键
K (确认)确认选择
V L+ /-音量控制
3 DISPLAY (显示)调整系统的显示值
4J( 返回上一章、曲目或标题
52; 开始 / 暂停 / 恢复播放
69按键两次停止播放
70-9数字键盘
8
SUBTITLE (字幕) 字幕语言选择器
9 RETURN (返回)适用于 VCD 菜单页
10A - B 重复或循环标题中的一个次序
11SETUP (设定)进入 SETUP (设定) 菜单
12 PTI N (选项)进入附加功能
13)K 跳至下一章、曲目或标题
14s播放器静音
15AUDI (音效)音频语言选择
16Z M (缩放)放大视频图像
2.1 您的便携式 DVD 播放器
您的便携式DVD播放器播放符合通用DVD视频标准的数字视频
光盘。拥有它，您可以享受完全长度的真实影院画面质量、享
受立体声或多声道音效(取决于光盘和播放设定) 的电影。
视频的独特特征，如选择声道和字幕语言、选择不同镜头角度
(同样取决于光盘)，都包括在内。
此外，父母锁让您决定您的孩子可以观看哪些光盘。有了屏幕
显示和播放器显示屏与遥控器的结合，您会发现您的播放器使
用起来非常简单。
2.2 启封包装
首先检查并识别包装中的物品，如下所列：
•便携式DVD 播放器 •遥控器 (AY5507)
•汽车适配器 (12V) (AY4115)•直流电源适配器 (AY4117)
•用户手册
•汽车头枕安装包 (AY4246)
2.3 放置
•将播放器放置在稳固、平坦的表面。
•远离家用供热设备并避免阳光直射。
•如果播放器不能正确读取CD/DVD，在送去维修之前尝试使
用一般可用到的清洁CD/DVD清洁镜头。其他清洁方法可能
会损坏镜头。
•一直保 关闭光盘门以避免镜头沾上灰尘。
•镜头在播放器突然由冷的环境带到温暖环境时，会凝结云状
水珠。这时无法播放CD/DVD。将播放器放在温暖的环境中
直到水汽蒸发。
2.4 可播放光盘格式
除DVD 视频光盘外，您还可以播放所有 VCD、CD、CDR、
CDRW、DVD±R 和DVR±RW。
2.4.1 DVD 视频
取决于光盘上的内容（电影、视频片断、系列剧等），
这些光盘可能有一个或多个标题，而每个标题可能有
一个章节或更多章。为使访问简单方便，播放器允许您能够在
不同的标题和章节之间移动。
2.4.2 VCD 视频光盘
如光盘盒所示，取决于VCD视频光盘上的内容（电影、
视频片断、系列剧等），光盘可能具有一个或更多的轨
道，而每个轨道可能有一个或多个索引。为使访问简单方便，
播放器允许您能够在不同的轨道和索引之间移动。
2.4.3 音频光盘 / MP3 / WMA 光盘
音频光盘 / MP3 / WMA 光盘只包含音乐轨道。您可以
使用遥控器和/或主装置上的键通过立体声系统以一贯
方式播放他们，或者使用屏幕显示 ( SD) 通过
电视机播放。
2.4.4 CD 附有 JPEG 文件的光盘
您也可以在播放器上观看JPEG 静止照片。
2.4.5 DivX 视频光盘
DivX是DivX有限公司发明的受欢迎媒体技术。DivX媒
体文件含有高度压缩、高画质的视频，却保 了较小
的文件大小。DivX文件还可以包括高级媒体功能，如菜单、字
幕和交替音轨。许多DivX媒体文件都可以在线下载，您也可以
使用自己的个人内容和来自DivX.com的易用工具创建自己的媒
体文件。
2.5 Zero Bright DotTM (零亮点)
享受最高质量的图像 (LCD 显示屏上没有烦人的空白
点)。LCD 显示屏通常有缺陷，被LCD行业中被称为“亮点”。
有限数量的亮点曾被认为是 LCD 行业大规模生产不可避免的副
作用。飞利浦便携式DVD 播放器采用了严格的质量控制程序，
其LCD 显示屏生产时的亮点允许量为零。选择带有Philips
Zero Bright DotTM (飞利浦零亮点) 保单的便携式DVD 播放器能
保证最佳屏幕质量。
保修服务因地区而异。如需更多详细信息，请联系您当地的飞
利浦代表。
1控制元件和功能组件
1.1 主要单元控制键
1.2 播放器正面
1.4 播放器右侧
1.5 播放器背面
1.6 遥控器
2介绍
2.1 您的便携式DVD
播放器
2.2 启封包装
2.3 放置
2.4 可播放光盘格式
2.4.1 DVD 视频
2.4.2 VCD 视频光盘
2.4.3 音频光盘 / MP3 /
WMA 光盘
2.4.4 附有JPEG 文件的光盘
2.4.5 DivX 视频光盘
2.5 Zero Bright DotTM
(零亮点)
3一般信息
4装置充电
4.1 为DVD 播放器充电
4.2 开启您的遥控器
5启动
5.1 设定
5.2 播放 DVD
5.3 播放 VCD
5.4 播放超级-VCD
5.5 播放音乐光盘
5.6 播放音乐MP3/WMA
光盘
5.7 播放图像光盘
5.8 从USB 播放
6附加功能
6.1 DISPLAY (显示) 目录
6.2 连接
6.2.1 耳机
6.2.2 电视
6.2.3 音频视频输入
6.2.4 USB
6.2.5 同轴插孔
7疑难解答
8技术数据
目录
电源
本装置使用提供的交流适配器、汽车适配器或可充电电池组。
•确定交流适配器的输入电压与当地电压相符。否则可能损坏
交流适配器和本装置。
•湿手切勿 摸交流适配器以防电击。
•与汽车电源 (点烟器) 适配器连接时，确保适配器输入电压与
汽车电压一致。
•长时间不使用本装置时从电源插口拔出交流适配器或移除
电池。
•握住插头来断开交流适配器。切勿拉电源卡。
安全和维护
•激光射线对眼睛有害，切勿拆开本装置。
任何服务均应由合格的服务人员执行。
•如果液体或 杂物进入本装置内部，拔掉交流电适配器切断
电源。
•小心勿摔着本装置或使其遭受强烈震动，这样会导致故障。
安全收听
收听时音量要适中。
•耳机音量过高会损坏您的听力。即使暴露在此音量
下的时间不超过一分钟，所产生的声音分贝强度也
可能会损坏正常人的听觉。较高的分贝范围是为听
力已经受损的人士准备的。
•声音有时会给您错觉。听了一段时间，听觉“舒适度”就会
适应更高的音量。因此，听得太久，“正常”的音量实际上已
经很大声，并且会损害您的听力。为了预防这个问题，请在听
觉适应一定的音量前先将音量调至安全水平并保 该音量。
设定安全的音量：
•先将音量控制设定在一个低水平。
•然后慢慢提高，直到您听起来舒服清晰且完全没有失真。
收听时间应有所节制：
•即使在“安全”水平下，长时间收听也会损害听力。
•请务必适度使用您的设备，并适时暂停休息。
使用耳机时务必遵守以下规范。
•收听的音量和时间应适度。
•注意不要根据您听力的适应程度调节音量。
•请勿将音量调节得过高而使您无法听到周围的声音。
•身处有潜在危险的场所时，请小心或暂停使用耳机。
•开车、骑自行车、溜冰时请勿使用耳机；否则会造成交通危
险，这在许多国家都属违法行为。
•重要事项 (对于提供耳机的型号):飞利浦仅确保原装耳机型号
符合相关管理机构规定的音频播放器的最大音量。如果需要
更换耳机，我们建议您与经销商联系订购与飞利浦提供的原
装耳机型号相同的耳机。
•
交通安全：驾车或骑自行车时请勿使用，否则可能造成事故。
• 切勿使播放器暴露于过热环境，如加热设备附近或直接日照。
•本装置不防水：切勿将播放器浸入水中。播放器中进水将导
致严重损坏。
•切勿使用任何含酒精、氨水、苯或研磨剂的清洁剂，否则会
损坏播放器。
•设备不能受到液体滴洒。切勿放置任何有危险的物体设备上
(如盛满液体的物体、点燃的蜡烛等)
•切勿 摸镜头!
使用光盘
•切勿在光盘上粘贴纸条或胶带。
•避免光盘受阳光直射并使其远离热源。
•播放后存放光盘于光盘盒中。
•使用柔软、不含麻的干净布从里向外清
洁光盘。
关于液晶屏幕的使用
液晶屏幕 为高 精科技产品。然而您可能会看见黑点连续地出
现在液晶屏幕 上。 这是 制造过程的正常结果，并不表明这 是
故障。
环境信息
我们已经最大限度地减少包装材料并使其能易于分成单一材料:
纸板、PS (聚苯乙烯)、PE (聚乙烯)和PET (聚酯)。
组成您的装置的材料如果由专业公司分解，可以被回收。请遵
守当地法规处理包装材料、废旧电池和旧设备。
版权信息
“DivX，DivX”已通过认证，其相关标志为DivX有限公司的商
标，未经许可不得使用。
所有其他的商标和产品名称为其相应公司或组织的商标。
未经授权对任何从互联网下载记录或对 CD / VCD / DVD 复制都
是违反版权法规和国际条约的行为。
Windows Media 和Windows 标志是微软公司在美国和 / 或其他
国家的注册商标。
长时间使用播放器，其表面会发热。这是正常现象。
注意 不同于这里的控制键或调整程序可能导致危险的辐射
暴露或其他不安全操作。
请始终使用提供的直流/交流适配器 (AY4129)
警告 在任何情形您都不得尝试自己修理本装置播放器，因
为这样会使保单失效。
如果发生故障，在送去维修之前，首先检查所列的要点。
如果您不能用通过下列的提示解决问题，那么向您的经销
商或服务中心请教。
视频扩音器、数字视频录像机和数码相机等视频输入设上
应具有RCA 输出连接。如果您的设备没有RCA 输出，请
咨询经销商。
注意
•电池包含化学物质，请妥善处置。
•电池更换不当将导致爆炸危险。
请用相同或相等类型更换。
•电池使用不当将导致电解液泄漏并腐蚀电池盒或者导致
电池爆炸。
•长时间不使用时请取出电池。
•高氯酸盐物质–可能需要特殊处理。请参见
www.dtsc.ca.gov/hazardouswaste/perchlorate。
但无法将数据从DVD 传输或记录到 USB 端口中。
5.1 设定
1按下 SETUP (设定) 这时会出现一个功能列表。
2使用 3/4突出显示您的选择。
3使用 J(（或）)K 进入子菜单
4使用导航键突出显示您需要的设定并按下 K 进行确认。
5 SETUP (设定) 菜单包括：
一般
语言 设定屏幕显示 ( SD) 语言
PBC 设定 开启/关闭播放控制功能。超级VCD具有此
功能。
省电设定 开启/关闭省电模式
DivX (V D) 获取DivX (Video- n-Demand) 代码
家长指引 设定家长指引选项
设定密码修改密码 (默认: 9999)
出厂设定 恢复出厂设定
视频
电视画面显示 设定屏幕显示纵横比
电视标准将视频输出格式设为电视系统
Mpeg 4 字幕 为 DivX 视频等 Mpeg 4 视频选择字幕语言
音效
杜比环绕声 设定杜比环绕声输出
数字 (SPDIF) 设定数字输出格式
5.2 播放 DVD
1轻按播放器主机上的 P WER (电源) 键启动装置。
2打开光盘门并插入光盘。
3播放器将自动开始播放光盘。
4使用导航键 1，2，3，4从DVD 光盘菜单中选择一个项
目，如现在播放、选择语言和字幕等。
8技术数据
尺寸 20.4 x 16.8 x 3.3 cm
8.0 x 6.6 x 1.3 英寸
重量 1.0 kg / 2.19 lb
电源 DC 9V 1.8A
功率≤20W
工作温度范围0 - 50°C (32 - 122°F)
激光波长650nm
视频系统NTSC / PAL / AUT
飞利浦保留为改进产品而更改其设计和规格的权利，恕不事先
通知。服务商如未经制造商授权擅自改动产品，可能会使其操
作本设备的权利失效。
版权所有。
版权信息
未经授权而制作包括电脑程序、文件、广播和录音在内的版权
保护材料的复本均违反了版权法并构成刑事犯罪。本设备不得
用于此类用途。
旧产品的处理
您的产品是由可以再生利用的优质材料和组件设计、
制造而成的。
如果某一件产品上贴有交叉轮状回收箱标志，则表示
该产品受第2002/96/EC 号（欧洲规章）的保护。
请了解当地有关电气和电子产品收集的专属制度。
请遵守当地的规定，不要将废旧产品与一般家庭废品
一起处理。正确处理您的废旧产品，利于防止对环境和人类健
康产生潜在负面影响。
1轻按播放器主机上的 P WER (电源) 键启动装置。
2将USB 闪存盘或 USB 记忆卡读卡器插入 USB 端口。
USB 插入式存储仅支 大容量存储 (MSC) 设备。它不支
硬盘USB 存储设备和 MTP (音乐传输协议) 格式的存储。
3播放器将自动浏览并显示 USB 闪存设备中的内容。
DVD 播放器浏览您的 USB 闪存盘中的内容时将花费一些
时间浏览时间因您的 USB 驱动器的存储容量和内容数量而。
要停用 USB 浏览器或切换到 DVD 播放，只要拔出USB
插头即可。
4使用导航键选择您想要存取的文件，然后按 K 播放它。
5
播放结束时，将 USB 闪存盘或 USB 记忆卡从播放器中拔出。
6附加功能
6.1 DISPLAY (显示)目录
如果在播放时按下 DISPLAY(显示)，下面的菜单将出现，您可
以获得相应的功能和信息：
亮度 使您能够调整屏幕的亮度
对比 使您能够调整屏幕的对比度
色彩 使您能够根据冷、暖和标准色彩调整屏幕的
颜色。
关闭 LCD 在与电视相连或播放音乐光盘等情况下，您
可以关闭屏幕。这样可以节省电池的电量
电 电量 显示电池的电量
6.2 连接
6.2.1 耳机
将耳机连接到播放器任意一侧的耳机插孔。
6.2.2 电视
您可以将播放器连接到电视上观看DVD。
6.2.3 音频视频输入
您可以与数字视频录像机或数码相机等其他设备连接。
白色
红色
黄色
7疑难解
如果 DVD 视频播放器有故障，请先参照这张检验表。这可能是
曾被忽视的东西。
症状 修理
没有电源 • 检 查 电 源 软 线 的两个插头是否适当
地接。
•插入另外一个设备检查交流电外接口
是否有电。
•检查电池组是否正确插入。
•检查汽车适配器是否正确连接。
画面失真 •检查光盘上是否有指纹并用软布从中
心到边缘清洁光盘。
•有时少量图像失真可能发生。这不是
故障。
完全失真的图像/电视
屏幕上没有颜色
NTSC/PAL 设定可能处于错误状态。使您
的电视设定与您的播放器设定匹配。
没有声音 检查音频连接。如果使用 HiFi 扩音器，
尝试另一个声源。
无法播放光盘 •确保光盘标签朝上。
•清洁光盘。
•
尝试另外一张盘，检查光盘是否损坏 。
播放器不响应遥控器 用遥控器直接 瞄准在播放器前的感应
器。消除所有对光路的干扰。检查或更
换电池。
DVD 图像失真或黑白
图像
仅使用依照电视机使用的格式化的光盘
(PAL/NTSC)。
数字输出口无音频 •检查数字连接。
播放时播放器不响应
所有的操作命令
•光盘不允许这些操作。
•参见光盘的说明。
无法检测USB 插入 •拔出 USB 插头并再次插入。检测所花
的时间将根据您的 USB 设备容量而
不同。
•DVD 播放器仅支 来自USB 闪存盘
的大容量存储 (MSC) 格式。
•DVD 播放器不支硬盘存储或媒体传
输协议(MTP) 格式。
无法切换至音频/视频
输入或无信号
•拔出音频/视频输入插头并再次插入。
•检查与数码相机和录像机等音频/
视频输出设备的连接。
•使用所提供的音频/视频电缆进 行
连接。
在DVD、USB 和音
频/视频输入之间切换
•DVD 播放器开启时，DVD 模式是默
认源。
•插入 USB 将激活USB 模式。拔出插
头可停用该模式。
•插入音频/视频输入插头将激活音频/视
频输入模式。拔出插头可停用该模式。
•切勿同时插入 USB 和音频/视频输入
插头。一次仅插入一种类型的插头。
•插入另一插头之前请中断现有连接。
播放器发热 播放器长时间使用后，表面会变热。这
是正常的。
拔下 AC 接头后，显
示器变暗unplugged
装置正在省电，以确保电池达到更长的
播 放 时 间 。 这 是 正 常 现 象。可以在
SETUP (设定) 菜单中调节亮度。
本装置符合欧盟的无线电干扰要求。
2
2
5
3
4
1
6
7
8
9
10
11
12
13
14
15
16
1
2
3
7
4
8
9
5
6
10 11 12 13 14
15 16
5以下功能在播放时可用：
暂停 按下 2; 键可暂停播放。您可以再次按下 2;
键以恢复播放
上一节目/ 轻按 J( 或)K 键或多次可选择您需要的章节
下一节目
快退/快进 反复按 J( 或)K 键将进行快速、2 倍速度、4
倍速度或 6倍速度的搜索。 然后按下 2; 键
可继续正常播放
音量控制 轻按 3或4键或反复按它们可增加或减少
音量
停止 轻按播放器右侧的 9键可停止播放
字幕 更改字幕显示。按下SUBTITLE (字幕) 或
PTI NS (选项) 键可使用本功能
语言 更改语言。按下 AUDI (音效) 或PTI NS
(选项) 键可使用本功能
视角 更改D V D 光盘提供的观看视角。按下
PTI NS (选项) 键可使用本功能。
缩放 放大屏幕，然后使用导航键拍摄屏幕。按下
Z M (缩放) 或PTI NS (选项) 键可使用
本功能
重复 A-B 设定重复循环播放。按下 A-B 设定开始点，
并再次按下 A-B 设定结束点。然后播放器将
进行重复循环播放。按下 A-B 可取消循环
播放。
5.3 播放 VCD
1轻按播放器主控上的 P WER (电源) 键启动装置。
2打开光盘门并插入光盘。
3播放器将自动开始播放光盘。
4以下功能在播放时可用：
暂停 按下 2; 键可暂停播放。您可以再次按下 2;
键以恢复播放。
上一节目/ 轻按 J( 或)K 键或多次可选择您需要的曲目
下一节目
快退/快进 反复按 J( 或)K 键将进行快速、2 倍速度、
4倍速度或 6倍速度或 8倍速度的搜索。然
后按下 2; 键可继续正常播放
音量控制 轻按 3或4键或反复按它们可增加或减少
音量
停止 轻按播放器右侧的 9键可停止播放
音效 一些VCD 仅有 2 种语言可供选择。您可以
使用本功能更改语言。按下 AUDI (音效)
或PTI NS (选项) 键可使用本功能
缩放 放大屏幕，然后使用导航键拍摄屏幕。按下
Z M (缩放) 或PTI NS (选项) 键可使
用本功能
重复 A-B 设定重复循环播放。按下 A-B 设定开始点并
再次按下 A-B 设定结束点。然后播放器将进
行重复循环播放。按下 A-B 可取消循环播放。
5.4 播放超级 VCD
(超级)VCD 可能具有PBC (播放控制) 功能。这使您能够按
照显示屏上的菜单交互式播放 VCD。
1轻按播放器主机上的 P WER (电源) 键启动装置。
2将 (超级)VCD 插入播放器右侧的光盘插槽。PBC 开启时，
屏幕上将出现光盘索引菜单。
3使用数字键盘 0-9 输入您的选择或选择一个播放选项。
4按下遥控器上的 RETURN (返回) 键返回前一个菜单。
5要开启/关闭播放控制模式，请进入 SETUP (设定) 并选择
PBC settings (PBC 设定)。
5.5 播放音乐光盘
1按下播放器主机上的 P WER (电源) 键启动装置。
2打开光盘门并插入光盘。
3播放器将自动开始播放光盘。
4以下功能在播放时可用:
暂停 按下 2; 键可暂停播放。您可以再次按下 2;
键以恢复播放。
上一节目/ 轻按 J( 或)K 键或多次可选择您需要的曲目
下一节目
快退/快进 反复按 J( 或)K 键将进入快速搜索模式。
然后轻按一次将使搜索速度变为 2 倍、4倍、
6倍、8倍、16 倍或 32 倍。
音量控制 轻按 3或4键或反复按它们可增加或减少
音量
重复 按下 PTI NS (选项) 键可选择重复 1个曲
目或重复所有曲目
随机播放 按下 PTI NS (选项) 键可开启或关闭随机
播放
停止 轻按播放器右侧的 9键可停止播放
5.6 播放音乐 MP3/WMA 光盘
1轻按播放器主机上的 P WER (电源) 键启动装置。
2打开光盘门并插入光盘。
3播放器将自动开始播放光盘。
4使用导航键选择文件夹和要播放的 MP3/WMA 文件。
5以下功能在播放时可用：
暂停 按下 2; 键可暂停播放。您可以再次按下 2;
键以恢复播放。
上一节目/ 轻按 J( 或)K 键或多次可选择您需要的曲目
下一节目
快退/快进 反复按 J( 或)K 键将进行快速、2 倍速度、4
倍速度或 6倍速度的搜索。然后按下 2; 键可
继续正常播放
音量控制 轻按 3或4键或反复按它们可增加或减少
音量
重复 按下 PTI NS (选项) 键可选择重复 1个曲
目或重复所有曲目
随机播放 按下 PTI NS (选项) 键可开启或关闭随机
播放
停止 轻按播放器右侧的 9键可停止播放
5.7 播放图像光盘
播放器只能读取JPEG 格式的图像。
1轻按播放器主机上的 P WER (电源) 键启动装置。
2打开光盘门并插入光盘。
3播放器将自动开始播放光盘。
4使用导航键选择文件夹和要播放的 JPEG 文件。
5以下功能在播放时可用：
暂停 按下 2; 键可暂停播放。您可以再次按下 2;
键以继续播放。
上一节目/ 轻按 J( 或)K 键或多次可选择您需要的曲目
下一节目
旋转 按下 PTI NS (选项)键可选择旋转模式。
然后使用 1键顺时针旋转图像。使用 2键逆
时针旋转图像。按下 PTI NS (选项)键可
退出旋转模式。
缩放 放大屏幕，然后使用导航键拍摄屏幕。按下
Z M (缩放) 或PTI NS (选项) 键可使用
本功能
停止 轻按播放器右侧的 9键可停止播放
6播放结束时，按下 9 / 使光盘从播放器中弹出。
5.8 从USB 播放
USB 端口支 JPEG / MP3 / WMA / DivX / MPG-4 文件的
播放。
6.2.4 USB
您可以插入 USB 闪存盘查看存储的图像和视频。
1插入 USB 闪存盘后，DVD 播放器将自动浏览您的 USB 驱动
器中的内容。
2播放的详细信息请参见 5.8 从 USB 播放部分。
3
观看结束后拔出 USB 驱动器。这也将停用 USB 浏览器功能。
6.2.5 同轴插孔
它提供数字音频输出信号，您可以将该信号连接到家庭影院设
备以对数字音频信号解码。
黄色
PET730_ifu-CS.qxd:PET730_ifu 1-4.qxd 3/7/07 10:49 AM Page 1
白色
红色
黄色

5Auto search
Auto search provides an overall search for all available channels
in your country.
-Press OK to start auto search.The screen will display
“running xx%”.
-Upon completion, the screen will display “finished”.
When search is completed, the first channel found will be
displayed.
A channel counter will indicate the number of channels that
can be found.
auto search
auto search
ch. found: 02
running 80%
setup exit
Analog TV
Before installation, please make sure that you are in an area
with sufficient TV signal coverage.As the TV signal is weaker in
an indoor environment, please always connect to a TV wall
socket for the best reception quality when using it at home or
indoor.
1First Time Installation
Antenna connection
Before you start to search for TV channels, connect the DVD
player to the antenna as shown.
2Setup TV channels
Setup you TV
1Press OPTIONS and select SOURCES > TV
2In TV mode, press SETUP, the TV Setup menu will be
displayed to show the following available functions.
-area setup:Select your area
-tv mode:Select a TV mode
-auto search:Run auto search for all available TV
channels
- ch. manage:Manage channels by deleting or
renaming them
-fine tuning:Fine tune each TV channel
3Area Setup
-Please make sure that you select the correct area that
matches your local TV system.
-Use 3/4key to select your area.
4TV mode
There are several modes available.
tv For normal on-the-air TV reception
cable tv For cable TV reception
system: The standard TV system used in various
countries. E.g. China use PAL TV system,
Russian use SECAM TV system
audio: E.g. China is PAL DK, Russian is SECAM D.
tv mode
tv
cable tv
system:
pal 2
audio:
pal I 2
setup exit
area setup
3
China
4
setup exit
tv setup menu
area setup
tv mode
auto search
ch. manage
fine tuning
setup exit
Option menu
Sources
Setup
[Option] EXIT
Note Sometimes, there may be duplicated or empty
channels found after Auto Search.This is due to TV signal
interference in some areas, not a malfunction of your
product.
6Channel manage
You can perform channel management
-current ch:It displays the channel number of the TV
channel you are currently watching.
-del. current:You can delete the current channel. E.g. If a
duplicate or empty channel was found due to
interference, you can delete those channel.
-rename:You can rename the channel number. The
renamed channel will overwrite the existing one. Please confirm
when you rename the channel.
Please remember to save before you exit ch. manage menu.
Otherwise, your changes will not be captured.
7Fine tuning
When there is interference in watching the TV, you can fine
tune the frequency of the reception.
-In the fine tuning menu, press 1/ 2key to decrease /
increase the frequency of the reception.
-You can press 1/ 2keys until a better picture quality with
less interference is found.
-Please remember to save before you exit the fine tuning
menu. Otherwise, your tuning will not be captured.
3Enjoy TV programs
To change channels
-In TV mode, you can either press CH-/CH+ to change
channels.
-Or, you can enter the channel number with the numeric
keys and press OK.
T
o change volume
-Press vol+ / vol – to adjust the volume level.
-Press sto mute the volume. Press sagain to restore
sound.
fine tuning
tuning 12
save
setup exit
ch. manage
current ch: 02
del. current: 02
rename: 116 2
save
setup exit
by-pack
antenna
home
antenna

-完成時屏幕會顯示“finished”（完成）。
搜索完成時，會顯示第一個找到的頻道。
ch. found (頻道計) 會指明可以找到的頻道數量。
auto search
auto search
ch. found: 02
running 80%
setup exit
模擬電視
安裝前請確保所在區域具有充足的電視信號覆蓋。由於室內環
境下電視信號較弱，在室內使用時請連接到室內天󲟫插座上以
確保最佳的接收質量。
1首次安裝
天󲟫連接
開始搜索電視頻道前，按照圖示將DVD播放器連接到天󲟫上。
2設置電視頻道
設置電視
1按下 OPTIONS (選項)並選擇 SOURCES (來源)>
TV (電視)
2在電視模式下按下 SETUP (設置),會顯示 TV Setup (電視
設置) 菜單以顯示以下可用的功能。
-area setup:選擇您的地區
-tv mode:選擇一個電視模式
-auto search:自動搜索所有可用的電視頻道
- ch. manage:刪除或重命名頻道
-fine tuning:微調各個電視頻道
3地區設置
-請確保您所選的地區與您的本地電視系統匹配。
-使用 3/4鍵選擇您的地區。
4電視模式
有幾種可用的模式。
tv 用於正常的無線電視接收
cable tv 用於有線電視接收
system: 用於各種國家的標準電視系統。例如中國使用
PAL TV 系統和俄國使用 SECAM 系統。
audio: 中國使用 PAL DK, 俄國使用 SECAM D.
5自動搜索
自動搜索可以全面搜索您的地區所有可用頻道。
-按下 OK 開始自動搜索。屏幕會顯示 “running xx%”(正在
運行 xx%).
tv mode
tv
cable tv
system:
pal 2
audio:
pal I 2
setup exit
area setup
3
China
4
setup exit
tv setup menu
area setup
tv mode
auto search
ch. manage
fine tuning
setup exit
Option menu
Sources
Setup
[Option] EXIT
注Auto Search（自動搜索）後，有時會出現重復或空白的
頻道。這是某些區域內電視信號幹擾造成的，並非產品故
障。
6Channel manage (頻道管理)
您可以進行頻道管理。
-current ch(當前頻道):顯示您當前正在收看的電視頻道號
碼。
- del. current(刪除當前頻道):您可以刪除當前的頻道。例
如，如果發現由於幹擾造成頻道重復，那麼您可以刪除重
復的頻道。
-rename(重命名):您可以重命名頻道號碼。 重新命名的頻
道會覆蓋現有的頻道。重命名頻道時請確認。
退出ch. manage (頻道管理) 菜單前請save (保存) 。否則，您
的更改無法生效。
7Fine tuning (微調)
收看電視時如果存在幹擾，您可以微調接收頻率。
-在fine tuning (微調) 菜單中按下 1/ 2鍵來減少/增加接收
頻率。
-您可以按下 1/ 2鍵直到找到幹擾較少的圖像質量。
-退出fine tuning (微調) 菜單前請save (保存) 。否則，您的
微調無法生效。
3享受電視節目
轉換頻道
-在電視模式下，您可以按下 CH-/CH+ 來轉換頻道。
-或者您可以使用數字鍵輸入頻道編號並按下 OK。
更改音量
-按下 vol + / vol - 來調節音量。
-按下 s來靜止音頻。再次按下 s來恢復音量。
fine tuning
tuning 12
save
setup exit
ch. manage
current ch: 02
del. current: 02
rename: 116 2
save
setup exit
天󲟫配件
室內天󲟫座