1Choosing mains Supply
aConnect the AC mains lead to the
AC MAINS inlet and the wall
socket..
-OR-
bOpen the battery door and insert
6 x D batteries.
STANDBY ON
y
power on/ off switch.
Quick Use
Guide
Quick Use
Guide
1a
3b
2Listening to the Radio
a Press
STANDBY ON
yto on,
then press Source selector
to select TUNER (or press
TUNER on the remote
control).
b Press and hold PROGRAM
until AUTOSTORE appears.
•Available stations are
programmed.
c Press ALBUM/ PRESET
-,+
until the desired preset
station is displayed
3Playing CD/MP3/WMA
This player plays Audio Discs
including CD-Rs/CD-RWs, and
MP3/WMA CDs.
aPress
y
once or more to on, then
select CD source.
bPress OPEN
•
CLOSE to open
the CD door.
c Insert a CD/MP3 with the printed
side facing up and close the door.
d Press 38 to start playback.
e To stop CD playback, press 9.
OPEN•CLOSE
Press to open/close the
CD door.
SEARCH ∞§
Skips & searches CD
tracks backwards/
forwards;
Tunes to radio stations
(down/up).
2a1
3a1
4a1
AZ3068
MODE
Press to select differ-
ent play modes: e.g.
REPEAT or SHUF-
FLE(random order)
ALBUM/ PRESET -, +
Press to select an
album. (MP3 only);
Press to select a
preset radio station
2c
2b
1b
R-20, UM-1 or D-cells
(not included)
3d
3e
4Playing a tape
aPress
y
once or more to on, then select TAPE
source
b Press 9/ to open the cassette holder.
c Insert a cassette and close the door.
dPress
1
to start playback.
eTo stop the tape, press 9/.
4b
4e
4d
2a2
3a2
4a2
AUX
3.5 mm jack for
external audio
appliance
p
3.5 mm stereo head-
phone socket
Source selector
Press to select CD(MP3-
CD)/ TUNER/ AUX/
TAPE function
PROGRAM
Use to program CD
tracks or preset radio
stations.
Telescopic antenna
Improves FM
reception.
VOLUME
Turn to adjust volume
level.
DBB
Press to turn the bass
enhancement on(DBB1
or DBB2) /off
.
CASSETTE
RECORDER keys
Press to operate a tape.
9
Press to stop CD
playback or erase a CD
program.
FM
•MW
Selects wavebands;
During playback, press to
display MP3-CD informa-
tion (MP3 only)
REMOTE CONTROL
Remove the insulation
plastic tab.
REMOTE CONTROL
Remove the insulation plastic tab.
Select the source you wish to control by
pressing one of the source select keys
on the remote control (for example CD,
TUNER).
Then select the desired function (for
example 2;,¡1,2™).
AZ3068_QSG_Eng.indd 1AZ3068_QSG_Eng.indd 1 2008-02-20 3:36:11 PM2008-02-20 3:36:11 PM
