Technical specifications
LCD :3x 0.9" HT Poly Silicon Active Matrix
:2,359,296 pixels, RGB stripe
Brightness :1000 ANSI Lumen
Contrast :200:1 (Black/White)
Lamp :UHP 120 compact; End user
replaceable,
up to 4000 hours
Lens :F1.8 - 2.2; f= 38-50 mm
:Manual zoom x1.3; Manual focus
:Projection distance 1.1 - 11 m;
Diagonal (44-440)”
Specifications :Longest life and “virtually” constant
light output over entire lamp life
projection lamp
:Philips LIMESCOTM inside for full auto-
matic Multi Scan data input handling,
VGA up to SXGA resolutions to full
screen (Frame Buffer)
:Intuitive graphic user interface for
ease of use
:Full PC control via ergonomic trackball
RC unit
:Fully Plug and Play compatible
(DDC 1/2b)
:Line doubling technology for perfect
video
performance
: Low noise ventilation
: Ceiling mount (Full Mirror) / Standby
Dimensions : 315 x 109 x 254 mm (WxHxD); 9 dm
:3
Weight Nett. : 5,5 kg /ca 12 lbs.
Package : Hopper XG20
: Lens-cap
: VGA cable (2m) + programmable MAC
adapter
:Mouse cable set (2m, 8 pin Mini DIN to
RS232; 2m, 8 pin Mini DIN to 4 pin
Mini DIN Apple MAC (ADB))
:Audio Video Cinch Cable
(2m, Video/Audio stereo)
:Scart adapter; scart to RCA video and
stereo audio
:Power cord (3m)
:Remote control + 3x AA batteries +
mouse driver floppies
:Projector Carrying Bag
:DFU (8 languages)
Model :LC 4043/40
LC 4043/17
Input/Output Capability
INPUT SIGNALS
Video :NTSC 3.58, 4.43/PAL-BG, N, M/Secam
Data :PC and MAC compatible, Multi scan
VGA, SVGA, XGA, SXGA via LIMESCO
full screen S VGA display (Frame
Buffer);
Auto Identification; Hor. scan rate up to
90 kHz; Vert. refresh rate up to 85 Hz.
Power In :120-240 V(Full range); 50/60 Hz;
160 W
INPUT CONNECTIONS
Video :S-Video (Y/C DIN);Video (Cinch);
Stereo Audio (2x Cinch)
Data :Mini sub-D data (15 pin)/PC,
Stereo Audio (M3,5 stereo jack) /
Serial mouse (RS232 and ADB)
Mains :Mains input socket (3 pin)
OUTPUT CONNECTIONS
Audio :Stereo Audio (M3,5 stereo jack)
Special features
•1000 Ansi Lumen
•Quiet - a quarter of the noise of current projectors
(Sound Pressure Level 33 decibels)
• Manual zoom / focus
• Ceiling mountable
• Auto Voltage - automatic worldwide compatibility
• Best picture performance - 1000 Ansi Lumen, longest
brightness over time, 85% picture homogeneity
• Philips LIMESCOTM (LIne MEmory Scan COnverter)
inside for full automatic Multi Scan data input handling,
VGA up to SXGA resolutions without information loss.
•Philips UHP Lamp; 120W up to 4000 hours, lamp life with
”virtually” constant light output for a perfect picture quality
•Philips Total Assurance:
-reliability
-robust design
-free technical support. (toll-free)
Warnings
1. Safety regulations require that the unit should be returned in
its original condition and that components identical to the
original components are used. The safety components are
indicated by the symbol !.
2. ESD
All ICs and many other semiconductors are sensitive to
electrostatic discharges (ESD). Careless handling during
repair can drastically shorten the life. Make sure that during
repair you are connected by a pulse band with resistance to
the same potential as the earth of the unit. Keep components
and tools also at this same potential.
3. When repairing a unit, always connect it to the mains voltage
via an isolating transformer.
The lamp supply and the lamp housing are not mains
isolated.
4. Be careful when taking measurements in the high-voltage
section.
5. Never replace modules or other components while the unit is
switched on.
6. When making settings, use plastic rather than metal tools.
This will prevent any short circuits and the danger of a circuit
becoming unstable.
7. After repair the wiring should be fastened once more in the
cable clamps for this purpose.
8. In order to prevent measuring errors, the heat sinks should
not be used as reference points for measurements.
9. The Lamp house and the lamp get hot during operation.
Please ensure that they are cooled down before servicing.
10. The lighthouse (optical part) is extremely sensitive to dust.
This part should only be opened in a dust-free environment
(class 100 according to the US federal standard 209).
Notes
1. The direct voltages and oscillograms should be measured
with regard to earth (4), or hot earth (5) as this is called.
2. The direct voltages and oscillograms shown in the diagrams
should be measured:
•For testpoints Txxxx VIDE;
using a video colour bar.
•For testpoints Txxxx DATA;
using a data greyscale.
•For testpoints Txxxx DRB;
using an internal greyscale.
•For testpoints Txxxx AUD;
using an audio signal of 1 kHz.
3. The semiconductors indicated in the circuit diagram and in the
parts lists are completely interchangeable per position with
the semiconductors in the unit, irrespective of the type
indication on these semiconductors.
LC4043 LC4043
2. Specifications 2-1 3-1 3. Warnings & Notes
PCS 92 689 GB PCS 92 690 GB