Philips LC7181 - Garbo Matchline WVGA LCD Projector User manual

Home Cinema Projector
Garbo Matchline
Philips
User guide
English

>
4
Packaging contents 4
Optional accessories 4
5-9
Controls 5-6
Remote control 7-8
Connections 9
10-11
Positioning the projector and screen 10
Switching on the projector 10
Adjusting the focus and size of the image 11
Adjusting the vertical angle of the projector 11
Keystone correction 11
Moving/transporting the projector 11
Preparation 11
Moving/transporting the projector 11
Inserting the batteries in the remote control 11
12-17
General information 12
Video input 12
Computer input 12
Universal Serial Bus (USB) 12
External monitor connection 12
Connecting to video equipment 13-15
CVBS 13
S-VHS 13
Scart connection 13
Component/HDTV (Pr,Y, Pb/ Cr,Y, Cb) 14
Scart connection (RGBS) 15
Connecting to a computer 16-17
PC/Macintosh 16
Connection to an external monitor 17
1. Introduction
2. Functional overview
3. Set up
4. Installation
Philips Home Cinema Projector English User guide Garbo Matchline 2
Index

<
18-27
Preparation 18
General 18
Messages 18
General explanation 18
Feedback messages 18
Some examples 18
On Screen Display Menu 19-27
Menu tree 19-20
General explanation 21
Video/S-Video adjustments 22
Picture adjustments 22
Display adjustments 22
Computer adjustments 23-26
Picture adjustments 23
Display adjustments 23
Some examples 24
Picture Format 24
Vertical Shift 24
Digital Zoom/Magnification 25
Picture in Picture (PIP) 25
Shift 26
Auto image 26
Horizontal size 26
General adjustments 27
Audio adjustments 27
General settings 27
28-30
Cleaning 28
Cleaning the cabinet 28
Cleaning the lens 28
Cleaning the dust filter 28
Lamp 29
Lamp replacement 29-30
Resetting the lamplife time 30
31-34
5. Operation
6. Maintenance
7.Troubleshooting
Philips Home Cinema Projector English User guide Garbo Matchline 3
Index

<
Congratulations on your purchase of one of the most sophisticated and reliable products on the
market today.We are sure that, used properly, it will bring you years of enjoyment.You will want
to keep this manual handy, as it is a convenient source of information about your projector.
For your own protection and prolonged operation of your projector,please read the enclosed
Safety Sheet.
Please confirm that the following items are packed in the projector box.They are provided to
help you use or set up your projector.
Projector Remote control + batteries Audio/Video RCA Cable
Lenscap - 3122 434 21542 3 x AA, 1.5 V - 3104 207 13810 4822 320 12280
VGA Cable S-Video cable Mains Lead
3122 438 75110 3122 438 75140 Europe:4822 321 11399
USA: 4822 321 11294
UK: 4822 321 11431
Printed User Guide Cd-rom (with Projection Assistant, Quick set up Card and
3103 435 90070 Warranty card, User Guide, Data Safety Sheet
sheet and more.) 3103 438 70060 3103 435 90060
Scart/RCA Audio Video Scart/RCA component Video
adapter (not for USA version) adapter (not for USA version)
2422 033 00345 3122 438 71170
• LCA 1120/00 - Soft bag - 8670 911 20009
• LCA 3116/00 - 132 W replacement lamp - 8670 931 16009
• LCA 2211/00 - Ceiling mount - 8670 922 11009
• LCA 5310/00 - MonitorY-cable - 8670 953 10009
• LCA 5300/00 -VGA extension cable (15 m) - 8670 953 00009
For further information on parts and accessories, please contact the dealer from which you purchased
your Philips projector.
Packaging contents
Optional accessories
Note
Philips Home Cinema Projector English User guide Garbo Matchline 4
1. Introduction
Stand by/On
Tue Jul 23 4:36pm
1/1 Projector
Mode AV M Menu
Device
Source
D-Freeze D-Zoom
Keystone
Correction

>
To mute the sound of the projector and to mute the picture.
To select the current projection source (Video, S-Video, Component, RGBS, Computer).
The button toggles between the five signals.
To adjust the volume.
To activate and deactivate the menu.
To confirm actions in the menu when the menu is on screen.
To switch the projector in or out of the Power/Standby mode.
The Standby indicator (text on button/ring around button):
–lights up orange when the projector is warming up;
–lights up red when the projector is in Power/Standby mode;
–lights up green as when the projector is operating;
–slowly blinks orange when the projector is cooling down.
–Lights up red in case of temperature error.
–Flashes in case of fan error.
–Lights up green when the lamp is on.
–Lights up orange when lamp life has almost expired.
–Lights up red when lamp life has expired.
–Fast blinks red when lamp start has failed.
To receive the signals from the remote control.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
To adjust the focus of the projected image.
To adjust the size of the projected image.
A(udio)/V(ideo) Mute 1
Source 2
– / + 3
Menu 4
OK 5
Standby/
Standby indicator 6
Temperature indicator 7
Lamp indicator 8
IR sensor 9
Cursor Control 0
Focus ring !
Zoomring @
Philips Home Cinema Projector English User guide Garbo Matchline 5
2. Functional overview
!@
0
45
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
789
123
6
Controls

<
To adjust the vertical angle of the projector.
To connect the projector to the mains.
To insert an optional locking device (Kensington lock).
Height/Level adjuster #
Dust filter $
Mains inlet socket %
Lock slit ^
Lamp compartment &
Philips Home Cinema Projector English User guide Garbo Matchline 6
2. Functional overview
#$
%^&
Controls

2. Functional overview
The ProntoNEO remote control supplied is an intelligent remote control that can be used for
virtually all audio and video devices that understand infrared (IR) signals. In this chapter we will
describe the remote control buttons needed for operating your Garbo Matchline projector. For
further use of the remote control see the information in the ProntoNEO user manual supplied.
The remote control operates with soft and hard buttons. Soft buttons are the buttons you can
tap on the LCD touch screen. Hard buttons are the buttons located below and on the left side
of the LCD touch screen.To activate the remote control, press any button or gently tap the
touch screen with your finger or a soft object.The display will then light up.
Before operating your projector via the remote control, first press the Device selection button and
select Projector on the Device Overview page.
Hard buttons
To select a next/previous soft button page.
To mute the sound of the projector and to mute the picture.
To adjust the volume.
To confirm actions in the menu when the menu is on screen.
To mute the sound of the projector.
When the menu is active the Cursor Control controls the menu cursor to navigate through the
OSD menu.The cursor control works with up/down and left/right button operation.
To activate and de-activate the menu.
To select the Device Overview page.
Note
+/–(Page up/down) 1
A(udio)/V(ideo) Mute 2
–Vol(ume) + 3
OK 4
Mute 5
Cursor Control 6
Menu 7
Device selection button 8
Philips Home Cinema Projector English User guide Garbo Matchline 7
>Remote control
4
5
7
1
2
3
8
6

Soft buttons
To switch the projector in or out of the Power/Standby mode.
To select the current projection source (Video, S-Video, Component, RGBS, Computer).
The button toggles between the five signals.
To capture a (moving) picture.The button toggles between the Freeze mode and the display
situation.
To correct picture distortion of the vertical keystone type by digital scaling.
To project aVideo or S-Video picture in the currently projected computer picture.
To select one of the six available picture format options (wide screen, super zoom 4:3, 4:3,
movie expand 14:9,movie expand 16:9, 16:9 subtitles).
To manipulate the mouse cursor on the connected computer as long as the menu is not active.
The cursor control works with up/down and left/right button operation.
The Cursor Control can only function as a mouse cursor when projector and computer are connected
via the USB or PS/2 connectors.Windows 98,Windows ME,Windows 2000 orWindows XP should be
installed on the computer when you make the USB connection.
Function as Left and Right mouse buttons of your pc when USB or PS/2 connection has been
made.
Standby/On 1
Source 2
D(igital)-Freeze 3
Keystone
Correction 4
PIP (Picture In Picture) 5
Picture format 6
Cursor Control 7
Note
Mouse Left/Right 8
Philips Home Cinema Projector English User guide Garbo Matchline 8
2. Functional overview Remote control
4
5
7
1
2
3
8
6
<

Video source connections
Input sockets to connect to DVD- and HDTV-video equipment
These sockets can be connected to the following output sockets: RGB-Y, YCbCr, YPbPr
(480p, 720p, 1080 i).
Input socket to connect to theVideo out socket of a video recorder, Laser Disc player, video
camera, DVD player, orTV with AV output socket.
This socket can be connected to CVBS output sockets.
Input sockets to connect to the Audio out sockets of a video recorder, laser disc player, video
camera orTV with A/V output socket.
Input socket to connect to the S-Video out socket of a S-VHS video recorder, aVCR,
Laser Disc player, DVD player, video camera orTV with AV output socket.
This socket can be connected to a S-Video/S-VHS (Y/C) output socket.
Data source connections
Input socket to connect to the Data out terminal of a computer.
Input socket to connect to the Audio out terminal of a computer.
In-/Output socket to connect a PC or Apple Macintosh computer equipped with a USB
downlink connection.When USB connection is used the mouse cursor on the connected
computer can be controlled via the projector remote control. Make sureWindows 98,
Windows ME, Windows 2000 orWindows XP is installed on the computer.
In-/Output socket to connect a PC or Apple Macintosh computer equipped with a PS/2
connection.When PS/2 connection is used the mouse cursor on the connected computer can
be controlled via the projector remote control.
Component in 1
Video 2
Audio L/R 3
S-Video 4
Computer 5
Audio in Computer 6
USB (upstream) 7
PS/2 8
Philips Home Cinema Projector English User guide Garbo Matchline 9
2. Functional overview
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Data Audio in Data PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Data Audio in Data
578
6
1234
<Connections

3. Set up >
•Place the projector on a stable, level surface, out of direct sunlight and away from sources of
excessive dust,dirt, heat, water, moisture, vibration and strong magnetic fields.
•Allow sufficient cooling of the product by keeping all air inlets and outlets clear from
obstructions.
•Position the projector in such way that the viewers cannot watch into the projector light beam.
•Choose a screen size suitable for the number of viewers and the size of the room.
•Picture quality is best when you sit directly in front of the projector screen.
•The projector can be used for both front projection, rear projection and ceiling projection
applications.As default factory setting, the projector has been set up for front projection.You
can change to rear or ceiling projection via the‘Mirror’function in the‘Picture’menu.
1Insert the mains lead into the projectors Mains inlet socket and connect it to the wall socket.
–The Standby indicator lights up red,the projector is now in the Power/Standby mode.
2Remove the lens cap.
3Press any button on projector or remote control to switch on the projector.
–The Standby indicator lights up orange.
–When the projection lamp is on, the Standby indicator lights up green and the start-up
screen appears for several seconds.
4Press the Standby button to switch the projector back into the Power/Standby mode.
–The StandbyWarning screen will appear for 20 seconds.
•The StandbyWarning screen can be removed by pressing the OK button.
5Press the Standby button again to confirm.
–The projector will now go into Power/Standby mode.
You can also press the Standby button twice in succession to switch the projector into Power/Standby
mode immediately.
6To switch off the mains supply completely, disconnect the mains lead.
Save energy! Please put the projector in the Power/Standby position if you are not going to use the
projector for more than 15 minutes.
When no signal inputs are detected for 30 minutes, the projector automatically switches to Power/
Standby (SmartSave).This setting can be changed in the ‘Settings’ menu
Before disconnecting the mains lead, make sure that the cooling fan has stopped (about 3 minutes
after the projector has been switched to Power/Standby).
Positioning the projector
and screen
Switching on the projector
Notes
Philips Home Cinema Projector English User guide Garbo Matchline 10
SCREEN
SCREEN
SCREEN
SCREEN
Front projection Ceiling front projection
Rear projection Ceiling rear projection
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p

Warning



If the projector is switched off you have to wait
1 minute before you can switch on the projector 
again.










Press stand-by ey again to confirm.
Press OK ey to remove this warning.
PHILIPS
PHILIPS
PHILIPS
Home Cinema Projectors
Home Cinema Projectors

•Use the Zoom ring to adjust the size of the image.
•Use the Focus ring to adjust the focus of the image.
To raise:
•Keep knob A pressed and lift to raise the projector.
–The Height/Level Adjuster B will come out.
To lower:
•Keep knob A pressed and gently lower the projector.
•Use the Focus Ring and Zoom Ring to readjust the focus and size of the image.
If projector and screen are not properly placed, the picture will be distorted, producing a
keystoned image (picture top width larger than picture bottom width or vice versa).When a
keystoned image occurs the image ratio (4:3, 16:9) will still be guaranteed.This is especially
important when the projector is being used together with an ‘intelligent whiteboard’.
‘Keystone correction’allows you to correct picture distortion of the vertical keystone type by
internal scaling.
•Use the Keystone button to widen the image.
•Use the Keystone button to narrow the image.
This correction function also is accessible through the ‘Keystone Correction’option in the
‘Settings’menu of the On Screen Display (OSD) menu.
Preparation
1Press the Standby button twice to put the projector in Power/Standby.
–The Standby indicator starts blinking orange.
2Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.
3Put the lens cap back in place to prevent dust,dirt or other contamination from harming or
damaging the front of the projector lens when moving the projector.
Never place the projector on the side where the connections are located.
Moving/transporting the projector
The projector contains many glass and precision parts. If you need to transport the projector,
please follow these packing instructions to pervent accidental damage to the projector.
•When you are hand-carrying the projector, be sure to use a carrying case like the optional
softbag.
•When shipping the projector, use the original packaging material if possible. If you do not
have the original packaging, use equivalent materials, placing plenty of cushioning around the
projector.
•When transporting the projector as freight or checked luggage, first put it in a carrying case,
then pack it in a firm box,using cushioning around the case.
1Push and slide the lid in the direction of the arrow.
2Install two‘AAA’batteries as indicated inside the battery compartment.
3Replace the lid and snap it into place.
The maximum range of the remote control is approximately 15 m (± 50 feet).
Adjusting the focus and
size of the image
Adjusting the vertical angle
of the projector
Keystone correction
Moving/transporting the
projector
Note
Philips Home Cinema Projector English User guide Garbo Matchline 11
3. Set up
Focus ring
Zoom ring
PS/2
USB
AudioL
AudioR
Video
Y
Pb
Pr
G
B
R
S-VideoDataAudioinData PS/2
USB
AudioL
AudioR
Video
Y
Pb
Pr
G
B
R
S-VideoDataAudioin Data
A
B
<
Inserting the batteries in
the remote control

Video input
The projector accepts the input signal of all major video formats, including NTSC 3.58, 4.43,
PAL B, G, D, H, I, N, M and SECAM signals.The projector will recognize these standards and
adapt to them automatically.With the ‘Picture Format’feature you can select one of six picture
format options: wide screen, super zoom 4:3, 4:3,movie expand 14:9, movie expand 16:9,
16:9 subtitles.
Computer input
The computer input is suitable for both Apple Macintosh computers (Power Book and Power
Mac) as well as for IBM compatible PCs.The projector is Microsoft (R),Windows (R)
95/98/ME/2000/XP compatible and accepts input signals from all computers that meet following
specifications:
•Multi scanVGA-SXGA
•Horizontal scan rate: 15-108 kHz
•Vertical refresh rate: 50-120 Hz
•Bandwith: 140 MHz
•Display Data Channel DDC:1/2B
The data output of IBM compatible PCs can be connected directly to the projector using
standard data cables.When connecting the projector to a Macintosh computer equipped with a
2 row, 15 pin connector aVGA/MAC adaptor (available at your PC store) is required. If your
computer is equipped with a 3 row connector no adaptor is needed.
Universal Serial Bus (USB)
The Universal Serial Bus (USB) connector allows you to connect to computers equipped with a USB
interface, resulting in real hot plug and play presentation.
Mouse control:
By connecting USB,the mouse function on the Remote Control automatically gets installed.
You can now manipulate the mouse cursor on the computer and on the screen, using Cursor Control
on the remote control.The Mouse Left/Right buttons on the remote control function as Left and Right
mouse keys of your pc.
Based on the specific hardware and software configuration available,Apple Macintosh computer users
could experience incomplete or erratic USB -functionality.These problems are not related to the
performance of your projector.
External monitor connection
A separate external monitor (or a second projector) can be connected to the projector.
The image projected is simultaneously shown on the monitor, even when the projector is in
Power/Standby or Off mode.
Always switch off projector and external equipment before making any connections.
General information
Note
CAUTION
Philips Home Cinema Projector English User guide Garbo Matchline 12
4. Installation <General information

>
1Connect theVideo (out) socket of aVCR, Laser Disc player, video camera orTV to the
Video (in) socket of the projector.
For this, use the video/audio connection cable (1a) supplied.
2Connect the Audio out L/R sockets of theVCR, Laser Disc player, video camera orTV to
the Audio (in) L/R sockets of the projector.
For this, use the audio/video connection cable supplied (1b).
1Connect the S-Video (out) socket of a S-VHS video recorder, Laser Disc player, video
camera orTV to the S-Video (in) socket of the projector.
For this use the S-Video connection cable supplied (2).
2Connect the Audio out L/R sockets of the S-VHS video recorder, Laser Disc player, video
camera orTV to the Audio (in) L/R sockets of the projector.
For this, use audio/video connection cable supplied (1b).
CVBS
1Connect the Scart/RCA AudioVideo adapter supplied to the Scart connector of theVCR,
Laser Disc player, video camera orTV.
2Plug the video/audio connection cable supplied into both the adapter and theVideo and
Audio (in) L/R sockets of the projector.
S-VHS
3Plug the S-Video connection cable supplied into theVCR and the S-Video socket of the
projector.
CVBS
S-VHS
Scart connection
Scart adapter
(not for USA version)
Scart adapter
(not for USA version)
Philips Home Cinema Projector English User guide Garbo Matchline 13
4. Installation
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Computer Audio in Computer
L Audio R
out S-Video
out
VCR
Video
out
1a 2 S-VHS only
CVBS only
CVBS only
CVBS only
CVBS only
1b
S-Video
Connecting to video equipment

>
Pr,Y, Pb/Cr,Y, Cb
1Connect the Component in sockets of the projector to the appropriate output sockets of
your Component- or HDTV-video equipment (Pr,Y, Pb / Cr,Y, Cb).
For this, use the audio/video connection cable supplied (1).
2If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (2).
–Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Component/HDTV
Philips Home Cinema Projector English User guide Garbo Matchline 14
4. Installation
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Computer Audio in Computer
Component/HDTV
equipment
Cr
Pr
R
Y
Y
G
Cb
Pb
BR
Audio
out L
DVD player,Settop Box,
HDTV receiver,etc.
12
Connecting to video equipment

<
RGBS
1Connect the Scart/RCA ComponentVideo adapter supplied (1) to the Scart connector of
your Component- or HDTV-video equipment
2Connect the Component in sockets of the projector to the R, G and B outputs of the
adapter.
For this, use the audio/video connection cable supplied (2).
3Connect theVideo input of the projector to theY output of the adapter.
For this, use an optional audio/video connection cable (3).
4Select‘RGBS’input by pressing the Source button.
–‘RGBS’appears on the screen.
5If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (4).
–Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
Scart connection
Philips Home Cinema Projector English User guide Garbo Matchline 15
4. Installation
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Computer Audio in Computer
DVD player,
Settop Box,etc.
R
Audio
out L
Component/HDTV
equipment
2
3
4
1
RGBS


Connecting to video equipment

>
PC/Macintosh
1Connect the Data (out) socket of the computer to the Computer (in) socket of the
projector and secure the plugs by tightening the thumb screws.
For this, use theVGA cable supplied (1).
2Connect the USB (upstream) socket of the projector to the USB downstream port of the
computer.
For this, use an optional USB cable (2).
or:
2Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer.
For this, use an optional PS/2 cable (3).
•When switching on, first switch on the projector and then the PC.
–You can now manipulate the mouse cursor on the computer and on the screen, using
Cursor Control on the remote control.When using the USB connection,make sure
Windows 98,Windows ME,Windows 2000 or Windows XP is installed on the computer.
–The display settings of the computer will be changed to fit the capability of the projector.
3If required you can connect the Audio out socket of the computer to the Audio in
Computer socket of the projector.
For this use an optional audio cable (4).
–Audio information from the Computer will then be played via the projector speaker.
Philips Home Cinema Projector English User guide Garbo Matchline 16
4. Installation
PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Data Audio in Data PS/2USB
Audio L
Audio R
Video
Y
Pb
Pr
G
B
R
S-Video Computer Audio in Computer
Audio out
Data out
Mac/PC
USB
Philips VGA/MAC adapter
24
PROJECTOR
PROJECTOR
COMPUTOR
COMPUTOR
MONITOR
MONITOR
1
3
5
PS/2
For external monitor
connection only
Projector
Projector
Computer
Computer
Monitor
Monitor
4a
5a
4b
5b
4c
5c
6
Connecting to a computer

Connecting to an external monitor
1Connect theVGAY connector marked ‘Projector’(5a), of an optionalVGAY-cable, to the
Computer (in) socket of your projector.
2Connect theVGA cable supplied (1) between the computer and theVGAY connector
marked‘Computer’(5b).
3Connect theVGAY connector marked ‘Monitor’(5c) to theVGA cable (6) of the monitor.
4Switch on your Computer.
5Switch on the projector.
6Select‘Computer’input,using the Source button.
–‘Computer’appears on the screen.
7Press Menu.
–The menu bar appears on the screen.
8Use Cursor Control to select ‘Settings’in the menu bar.
9Use Cursor Control to select ‘Monitor out’.
10 Use Cursor Control to select ‘On’.
–The projector will indicate the necessity to connect theY-cable.
11 Switch on the external monitor.
–The image projected is simultaneously shown on the monitor.
Philips Home Cinema Projector English User guide Garbo Matchline 17
4. Installation
Computer


Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Off On
Picture

(previous)
Start-up screen
SmartSet
Feedbac 
Lamp counter
Monitor out





Display Audio Settings
Monitor out is to be activated if an extra monitor
is connected to the projector. Otherwise it should 
be de-activated and no special Y-cable should be 
connected.
Settings
Picture

Language
Keystone correction
System information...
Factory reset
Key loc 
SmartSave
(more)
Display Audio


<Connecting to a computer

<
1Press the Standby button to switch on the projector.
–The Standby indicator lights up orange.
–When the projection lamp is on, the Standby indicator lights up green and the start-up
screen (when enabled) appears for several seconds.
2Select the required source (Video,S-Video, Component, RGBS, Computer) by pressing the
Source button.
When only one input source is connected, this source will automatically be selected (AutoSet).When
more input sources are connected, the source with the highest priority will be selected (Video,S-Video,
Component, RGBS, Computer). Source selection can be changed in the‘Settings’menu.
3Switch on the computer or start video playback.
–A feedback message appears on the screen, indicating the selected source.
General explanation
Messages are displayed in the centre of the screen.The problem is described in the header of
the message display. Suggestion(s) to solve the problem are displayed in the gray part of the
message display.
These messages cannot be suppressed.
Feedback messages
Feedback messages are displayed in the top right corner of the screen.They are displayed when:
–a signal comes up or goes down;
–when an input source is changed;
–when Mute or A/V Mute is activated;
–when the Auto image function is set to On.
Some examples
These messages will only be displayed when the menu option‘Feedback’is set to ‘On’in the
‘Settings’menu.All messages will be removed automatically after 4 seconds.
General
Note
Messages
Philips Home Cinema Projector English User guide Garbo Matchline 18
5. Operation
pj
PHILIPS
PHILIPS
PHILIPS
Home Cinema Projectors
Home Cinema Projectors
Fan error

The projector will switch off automatically.

Please:
1. Chec whether the filter door is properly closed

If the problem persists in spite of the above, please
contact a service centre for repair.
Computer


Video

No signal
S-Video

A/V Muted
Component

A/V Muted
Computer selected as source Video selected as source, S-Video selected as source, Component selected as
no input signal A/V muted source A/V muted
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Preparation

>
All video and data adjustments and settings (except A/V Mute) are done via On Screen Displays
and with help of Menu, OK and Cursor Control on the projector or the remote control.
The projector is set to standard specifications at the factory. However, you can adjust these
specifications to suit your own preferences.The projector menu screens allow you to adjust the
various projector settings (for both Computer andVideo). For explanation and operation see
next pages.
VIDEO/S-VIDEO MODE
Main menu Sub menu Setting
Picture Picture Format wide screen
super zoom 4:3
4:3
movie expand 14:9
movie expand 16:9
16:9 subtitles
Contrast min max
Colour tracking vivid natural
Saturation min max
Hue (NTSC only) min max
Sharpness sharp soft
Colour temperature warm cool
Red min max
Green min max
Blue min max
Brightness min max
Mirror
Display Digital Freeze Off On
Digital Zoom Off On
Magnification min max
COMPUTER MODE
Main menu Sub menu Setting
Picture Picture Format wide screen
super zoom 4:3
4:3
movie expand 14:9
movie expand 16:9
16:9 subtitles
Contrast min max
Colour tracking vivid natural
Colour temperature warm cool
Red min max
Green min max
Blue min max
Brightness min max
Mirror
Menu tree
Philips Home Cinema Projector English User guide Garbo Matchline 19
5. Operation
Picture

Picture format
Contrast
Colour trac ing
Saturation
Hue
Sharpness
(more)


min


Move pointer left or right to adjust the contrast level.
Display Audio Settings
max








Picture

Picture in Picture
Source
 Position...
Digital Freeze
Digital Zoom
Magnification
(more)






PIP is used to switch Off or On the PIP window
with the selected size.

Display Audio Settings
PIP size
Off
Small Medium Large
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Menu OK
AV
Mute Source
Stand
by
Lamp
Tem p
Picture

(previous)
Colour temperature
 Red
 Green
 Blue
Brightness
Mirror


min


Move pointer left or right to adjust the Red level.
Display Audio Settings
max

On Screen Display Menu

COMPUTER MODE
Main menu Sub menu Setting
Display Picture In Picture Off, Small, Medium, Large
Source Auto,Video, S-Video
Position Cursor controlled
positioning
Digital Freeze Off On
Digital Zoom Off On
Magnification min max
Auto Image Off On
Horizontal Size min max
Phase min max
Shift Cursor controlled Shift
GENERAL ADJUSTMENTS/SETTINGS
Main menu Sub menu Setting
Audio Volume Min Max
Bass Min Max
Treble Min Max
Mute Off On
Settings Language Eng.
Esp.
Deu.
Fra.
Por.
Ita.
Chi.
Keystone correction
System information OK
Factory reset OK
Key lock OK (3 sec.)
SmartSave Off 15 30 45 60 120
Start-up screen Off On
SmartSet Off On
Feedback Off On
Lamp counter OK (3 sec.)
Monitor out Off On
Menu tree
Philips Home Cinema Projector English User guide Garbo Matchline 20
5. Operation On Screen Display Menu >













Picture

(previous)
Auto Image
 Horizontal size
 Phase
 Shift . . .







Shift is used to adjust the position of the image.
Press OK ey to activate Shift.

Display Audio Settings
Settings
Picture

Language
Keystone correction
System information...
Factory reset
Key loc 
SmartSave
(more)
Display Audio


Settings
Picture

Volume
Bass
Treble
Mute
Display Audio

Settings
Display Audio


Off On
The Start-up screen can be shown or suppressed
during start-up.
Picture

(previous)
Start-up screen
SmartSet
Feedbac 
Lamp counter
Monitor out