2-1 2-1
1) System Reset
a) Press "SYSTEM" button on R/C. TV show "SETUP"
b) Select the menu using the " " and " " button on R/C
c) Go feature setup page to do system reset
2) Region Code Change
System, Region code, Tuner, etc. setting procedure
Afterreplacement /repair ofthe MPEGboard,thecustomer
setting and the region code may lost. Changing the Region
code will put the player back in the state which it has left the
factory.
Region Code 1 USA
2EU
3AP
4 Australia, NZ, Latam
5 RUSSIA, INDIA
6 CHINA
TV System 1 NTSC
2PAL
3AUTO
Menu/ Audio Subtitle (AS) Language
1 English
2 English
3 English
4 English
AFS 001 LX3000D/HTS3400/MRD130
MX2600/HTS3090
002 MX3600D/MX3800
003 LX3700D/LX3750W
005 MRD210
006 MX3660D
008 FWD573/FWD792/FWD798
010 MRD120/MX6050
oem derivative
08
.region code = 1 digit
.tv system = 1 digit
."as/menu lang" = 1 digit
."AFS" = "architechture Feature Set" = 3 digits
Thisfieldisusedtodefinethearchitecture/ featuressetsfor
each product.
."oem derivative" = 2 digit
This field is use to define the OEM set. This will affect the
background display.
Hence in total, reprograming will be done by way of the
remote control. It should run as below :-
a) Put the player in stop mode. No disc loaded.
b) Press the following key on remote control:
For HTS3090/55/77/78 (LATAM) :
<PLAY> <159> <411> <001> <08> <PLAY>
∗∗
∗∗
∗AftertheRegion Codeischanged itis necessary toreset
the system so that the new Region Code will be fully
effective.All customer setting will be lost.
∗∗
∗∗
∗On top of the maximum number of times allowed for
changing the region code is changed to 25.
∗∗
∗∗
∗When the counter reach 25, you will not be able to further
change the code until you reset the timer by the Region
Code timer reset procedure
3) Region code change timer reset
Press below key to reset the timer :
a) In DISC source, stop mode and no disc in tray.
b) Press R/C "Play -159-PLAY" to reset timer to 25
4) Tuner area change
a) Press the "OPEN/CLOSE" button to open the set's door
b) Press "1" "5" "9" button by using R/C.
c) TV Show "TUNERAREA"
d)Select thetuner areayou want by using the " " and" "
button on R/C, then press "OK" to confirm. TV show "
TUNER AREA CHANGED"
If you didn't press it in five seconds, the system will remain
original status.
87.5M 108M 50K/100K
Note :-
Please refer to the above different tuner area.
5. Video Out Change
a) Press "SYSTEM" on R/C button
b) Select the menu using the " " and " " button on R/C
c) Go picture setup page select Video out item.
6. Password Change
a) Press "SYSTEM" on R/C button
b) Select the menu using the " " and " " button on R/C
c) Go feature setup page select "PASSWORD". TV show
"ENTER CODE".Press 4 times of "STOP" button on R/C.
d) Select "PARENTAL" "8ADULT" on TV.
e) Enter PASSWORD to "1234".
∗∗
∗∗
∗"1234" is a default password supplied.
7. Checking on the Software version
a) Open the CD door.
b) Press "123" and "OK" on the remote control.
c) TV will show the version on screen.
8. Upgrading new software
a) Open the door, then insert the CD-R program disc.
b) Close the door.
c) TV will show:-
."disc loading"
."bank30.rom"
."writing" about 6 seconds.
."Done"
CAUTION !
Thisinformationisconfidencialandmaynot
be distributed. Only a qualified service
person should reprogram the Region Code.
AREA BAND FREQUENCY (Hz) STEP(Hz)
531K 1602K 9K
530K 1710K 10K
FM
MW
LATAM
(55/77/78)