Philips ipronto TSi6400 User manual

1
FCC Compliancy 2
What Does the iPronto Box Contain? 3
About the iPronto Documentation 4
About the iPronto 5
Installing the Wireless LAN Adapter 8
Installing and Recharging the Battery 10
Installing 10
Recharging 13
Getting the iPronto Up and Running 14
Setting up Your iPronto 15
Setting up Your Network 20
Using the iPronto 27
The Touch Screen 27
The Status Display 27
The iPronto’s External Controls 28
The Ports 29
Navigating the iPronto 30
The Keyboard 33
The Remote Control 35
How Does the iPronto RC Work? 36
Learning IR Codes 38
Using iProntoEdit 41
The Browser 43
Setting the Home Page 44
Entering a URL 45
The Electronic Program Guide 46
Registration 49
Troubleshooting 54
Index 58
Table of Contents
iPronto.qxd 01-08-2002 08:44 Pagina 1

iPronto User Guide
2
FCC Compliancy
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC rule. These limits are designed to provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
■Reorient or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a different circuit from the receiver.
■Consult the dealer or an experienced radio/TV technician for help.
iPronto.qxd 01-08-2002 08:44 Pagina 2

3
What Does the iPronto Box Contain?
The iPronto box contains the following items:
Warranty
Battery
iPronto iPronto User Guide
Wireless LAN Adapter
AC power adapter
with cable
iPronto.qxd 01-08-2002 08:44 Pagina 3

iPronto User Guide
4
The iPronto documentation consists of two parts:
■This iPronto User Guide. This guide is meant to help you set up and start using the iPronto.
■The iPronto Online Help. The iPronto Online Help contains complete information on how to use the
iPronto remote control and its extra features. You can find the iPronto Online Help on
http://www.pronto.philips.com/products/ipronto/help/
About the iPronto Documentation
iPronto.qxd 01-08-2002 08:44 Pagina 4

5
About the iPronto
Wirelessly connected to the Internet, the iPronto is a must-have for your home entertainment experience. With its
dashboard you can easily access all iPronto’s applications. The dashboard offers access to three basic applications:
the remote control, the Electronic Program Guide and the Browser, however, you can add new applications to the
dashboard.
With iPronto’s universal remote control you can operate almost all your devices, as long as they understand
IR (infrared) signals. And because of its intuitive interface, iPronto is easy to use for everybody.
But iPronto is not only a remote control: it also has an Electronic Program Guide. Without any effort you always
have an up-to-date and customizable Program Guide for your favorite channels. What makes this Electronic Program
Guide so unique is its direct interaction with the iPronto’s remote control. No more wading through pages of program
guides.
Get the information you want fast and start watching your programs immediately by tapping one single button. You are
watching TV and would like to see sports shows? Using the EPG, you only need one button press to surf through the
channels that are broadcasting sports at this particular moment.
The iPronto is also provided with easy Internet browsing functionality. With the browser application it is now
possible to connect to the Internet while you sit back and relax in front of your TV.
iPronto.qxd 01-08-2002 08:44 Pagina 5

iPronto User Guide
6
About the iPronto
The iPronto consists of several parts:
microphone
stylus
power button
speaker
scroll wheel
speaker
RC buttons
status display
iPronto.qxd 01-08-2002 08:44 Pagina 6

7
About the iPronto
This User Guide is meant to help you set up and start using your iPronto. For detailed information on using the various
iPronto applications please refer to the iPronto Online Help. If you follow the flow of the chapters in this guide, you will
have your iPronto up and running in no time. You find information about:
■Installing the Wireless LAN Adapter on page 8;
■Installing and Recharging the Battery on page 10;
■Getting the iPronto Up and Running on page 14;
■Using the iPronto on page 27;
■Using the iPronto’s basic applications: The Remote Control on page 35, The Browser on page 43 and
The Electronic Program Guide on page 46;
■Troubleshooting on page 54.
IR learning eye
and sending eye
cover of the
wireless LAN
adapter
reset button cover of the battery pack
stand
iPronto.qxd 01-08-2002 08:44 Pagina 7

iPronto User Guide
8
Installing the Wireless LAN Adapter
In a wireless network, the Wireless Access Point (WAP) is the last point that is connected to your network with wires.
To communicate with your iPronto, the WAP sends out RF (radio frequency) signals, which spread in all directions. The
iPronto’s Wireless LAN Adapter (also called PCMCIA card) receives these RF signals and sends RF signals back to the
WAP.
The first thing you do when you take your iPronto out of the box, is installing this Wireless LAN Adapter. In the
following illustrations you see how the installation works:
1 Open the Wireless LAN Adapter cover by pushing in the grips and sliding off the cover in the direction
indicated below (figure 1).
2 Insert the Wireless LAN Adapter in the socket, as indicated below (figure 2).
Figure 1 Figure 2
iPronto.qxd 01-08-2002 08:44 Pagina 8

9
Installing the Wireless LAN Adapter
3 Put the Wireless LAN Adapter in the correct position and close the cover.
Note Do not install any other adapter. Do not remove the Wireless LAN Adapter when the iPronto is activated. After the Wireless
LAN Adapter is installed, there is no need to remove it. It can permanently be left inside the iPronto.
iPronto.qxd 01-08-2002 08:44 Pagina 9

iPronto User Guide
10
Installing and Recharging the Battery
Installing
After installing the Wireless LAN Adapter, you install the battery. The battery is precharged, but it is advisable to
charge the battery for three hours when you start using the iPronto. See Recharging on page 13.
Insert the battery as follows:
1 Lift the stand (figure 1).
2 Open the battery cover by pushing the grips and sliding off the cover in the direction indicated below
(figure 2).
Figure 1 Figure 2
iPronto.qxd 01-08-2002 08:44 Pagina 10

11
Installing and Recharging the Battery
3 Attach the battery connector to the provided socket (figure 3).
4 Put the right-hand side of the battery under the provided hook (figure 4).
Figure 3 Figure 4
iPronto.qxd 01-08-2002 08:44 Pagina 11

iPronto User Guide
12
Installing and Recharging the Battery
5 Push the left side of the battery down into its place.
6 Close the battery cover.
iPronto.qxd 01-08-2002 08:44 Pagina 12

13
Installing and Recharging the Battery
Recharging
The iPronto is provided with a power adapter to recharge the battery. When the battery is low, it takes about two hours
to recharge. After three hours, recharging is automatically stopped. On first usage, it is advisable to recharge the
battery for the full three hours. The iPronto can be used when it is recharging.
In order to keep the battery in the best condition, it is best to recharge it frequently. It is advised to recharge before the
battery is empty, otherwise you might lose some of your settings. In normal use, recharge every 2 days. When you use
the iPronto very frequently, recharge every day. In this illustration you see how to plug in the power adapter:
The first time you put the battery in the iPronto, the iPronto
will start up automatically and guide you to the System
Settings. This may take 1 to 2 minutes. Continue with the
next chapter, Getting the iPronto Up and Running, to adjust
the settings.
iPronto.qxd 01-08-2002 08:44 Pagina 13

iPronto User Guide
14
Getting the iPronto Up and Running
This chapter is divided in two parts. In the first part, Setting up your iPronto, you read how to define the general
settings. In the second part, Setting up your Network, you read how to set up your wireless network and internet
connection.
The first time you activate your iPronto, it will lead you through some initial screens and messages. After these
messages the System Settings will automatically appear on the screen. The settings are divided into four tabs:
System Settings
iPronto.qxd 01-08-2002 08:44 Pagina 14

15
Getting the iPronto Up and Running
■General: On this tab you adjust general settings and you can check your battery status and network signal
strength. See Setting up Your iPronto on page 15.
■Wireless: On this tab you set the wireless network settings. You need to set these settings so the iPronto can be
connected to your network and to the Internet. See Wireless Network Settings on page 21.
■Network: On this tab you set your Internet connection settings. See Internet Settings on page 23.
■About: On this tab you read information about licence terms and agreements. A button for downloading new
software from the Internet is also located on this tab. If you tap the button, the iPronto will check if updates of your
software are available. When there are updates available, you can download them from the Internet immediately.
Note While adjusting the System Settings, it is useful to operate the touch screen with the stylus. See The Touch Screen on
page 27 for more information.
Setting up Your iPronto
After installing the Wireless LAN Adapter and the battery, you need to calibrate your touch screen and define the
settings on your iPronto, such as time and date, brightness, time out and so on. These settings are necessary to make
your iPronto function properly.
The first time you activate your iPronto, the System Settings will automatically appear on the screen. To access the
System Settings later, follow this procedure:
1 Press and hold the scroll wheel for 5 seconds.
The page turns to its flipside.
2 To exit the System Settings, press and hold the scroll wheel for 5 seconds.
The page turns to its normal view.
iPronto.qxd 01-08-2002 08:44 Pagina 15

iPronto User Guide
16
Getting the iPronto Up and Running
Calibrating the Touch Screen
On first use, you need to calibrate the touch screen of your iPronto. By calibrating, you improve the accuracy of the
touch screen.
1 Select the General tab in the System Settings.
2 Tap the Calibrate touchscreen button.
The Calibration screen appears.
3 Follow the instructions that the iPronto provides.
When calibration has succeeded, you hear a success beep.
Adjusting the Time
1 Select the General tab in the System Settings.
2 In the Time section, select the Hours box.
The selection appears with a highlighted border.
3 Use the +and –buttons to change the hour.
4 In the Time section, select the Minutes box.
The selection appears with a highlighted border.
5 Use the +and –buttons to change the minutes.
6 In the Time section, select the AM/PM box.
The selection appears with a highlighted border.
7 Use the +and –buttons to change AM or PM.
iPronto.qxd 01-08-2002 08:44 Pagina 16

17
Getting the iPronto Up and Running
Adjusting the Date
1 Select the General tab in the System Settings.
2 In the Date section, select the Days box.
The selection appears with a highlighted border.
3 Use the +and –buttons to change the day.
4 In the Date section, select the Months box.
The selection appears with a highlighted border.
5 Use the +and –buttons to change the month.
6 In the Date section, select the Years box.
The selection appears with a highlighted border.
7 Use the +and –buttons to change the year.
Adjusting the Timezone
You need to set the timezone to enable your Electronic Program Guide to display the correct data at the right time.
1 Select the General tab in the System Settings.
2 Select the Timezone dropdown list.
A list of all timezones appears.
3 Select your timezone from the dropdown list.
iPronto.qxd 01-08-2002 08:44 Pagina 17

iPronto User Guide
18
Getting the iPronto Up and Running
Adjusting the Brightness
You can set the brightness of the touch screen in 16 intervals.
1 Select the General tab in the System Settings.
2 In the LCD Brightness section, use the +and –buttons to set the brightness.
Adjusting the Power off Time Out
Time Out when iPronto is running on the battery
1 Select the General tab in the System Settings.
2 In the LCD power off when running on batteries section, use the +and –buttons to set the LCD time out.
You can choose a time out between 30 seconds and 15 minutes.
Time Out when iPronto is plugged into the power adapter
1 Select the General tab in the System Settings.
2 In the LCD power off when plugged in section, use the +and –buttons to set the LCD time out.
You can choose a time out between 30 seconds and 15 minutes, or you can choose to always leave the display on.
iPronto.qxd 01-08-2002 08:44 Pagina 18

19
Getting the iPronto Up and Running
Adjusting the Wake up Conditions
You can wake up a sleeping iPronto in several ways.
1 Select the General tab in the System Settings.
2 In the Wake up on section, select:
■Power Button & Touch & Tilt to wake up the iPronto when the Power Button is pressed, when the screen is
tapped or when the iPronto is tilted.
■Power Button & Touch to wake up the iPronto when the Power Button is pressed or when the screen is
tapped.
■Power Button to wake up the iPronto only when the Power Button is pressed.
iPronto.qxd 01-08-2002 08:44 Pagina 19

iPronto User Guide
20
Getting the iPronto Up and Running
Setting up Your Network
After adjusting the settings in the General tab, you have to set your wireless network settings and Internet settings in
the Wireless and Network tabs. These settings depend on the kind of configuration you have in your home. You can
find an overview of different kinds of configurations in the iPronto Online Help at
http://www.pronto.philips.com/products/ipronto/help/.
In the illustration below you see an example of a configuration.
Example of a Configuration
iPronto.qxd 01-08-2002 08:44 Pagina 20