Philips 4000 series User manual

TAB4308
4000 Series
Soundbar

① ②
⑥
⑤
③ ④
②
: Short press: Input source switch
Long press: Power on/Standby
: BT/USB mode: Play/Pause
: Decrease volume
: Increase volume
USB: USB play slot
: Soundbar LED indicator
/
①
③
⑤
⑥
④

1.ST-BY
2.MUTE
3.Input
4.VOL+
5.PREVIOUS
6.NEXT
7.PLAY/PAUSE
8.VOL-
9.TRE-
10.TRE+
11.BASS-
12.BASS+
13.EQ
Input
Vol+
Vol-
Tre-
Bass
-Bass +
EQ
Tre+
1
3
4
5
8
9
11
2
6
7
10
12
13
1. ：Switch the SoundBar on or to
standby
2. ：Mute or restore volume
3. Input: Source Switch, nou for Audio in, bt
for Bluetooth, USb for USB, ArC for
HDMI
4. VOL+：Volume up.
5. : In BT/USB mode, press to previous
track. In USB mode, long press to
rewind.
6. : In BT/USB mode, press to next
track. In USB mode, long press to
rewind.
7. : In BT/USB mode, Play, Pause or
resume play.
8. VOL-: Volume down.
9. Tre-: Decrease treble
10. Tre+: Increase treble
11. Bass-: Decrease bass
12. Bass+: Increase bass
13.EQ: Select EQ,
"OIL"：Movie,
"USIC"：Music,
"OICE" : Voice,
"StAd" : Stadium

①
②
③ ④
AC IN
SUB OUTPUT

Connect the SoundBar and Subwoofer
through Subwoofer cabe

USB
Using a 3.5mm stereo audio cable, connect
the AUX IN connector on your SoundBar
to the LINE connector on theTV or other
device.
Using an USB, connect the USB
connector on your SoundBar to play the
music saved in your USB driver.

Adjust the volume
0
+30
Max
Min
When adjusting the volume of the sound-
bar, the status indicator will show the
current volume from 0 to max 30.
Adjust the volume
1Press +/- on the soundbar or press
Vol+/Vol- on the remote control to
increase /decrease the volume level.
bass
-5
bass
+5
-5
Treble
Treble
+5
Adjust the treble and bass
volume
2Press Bass -/+ on the remote
control to increase/decrease
subwoofer’s volume.
3Press Treble -/+ on the remote
control to increase/decrease
Treble’s volume.
Input
Vol+
Vol-
Tre-
Bass
-Bass +
EQ
Tre+
Input
Vol+
Vol-
Tre-
Bass
-Bass +
EQ
Tre+
Input
Vol+
Vol-
Tre-
Bass
-Bass +
EQ
Tre+

15
1，Press to turn on SoundBar, switch to
“bt” mode, LED indicator blinks at “bt”
model
2，On the Bluetooth device, switch on
Bluetooth, search and select “TAB4108” to
start connection,
3，When it connected, the LED indicator
would stop blinking, with connected voice
notication.
4. Select and play audio les or music on
your Bluetooth device
During play, if a call is coming, music play
is paused.
lf your Bluetooth device supports AVRCP
prole, on the remote control you can
press to skip to a track,or press to
pause/resume play.
5. To exit Bluetooth, select other source.
When your switch back to Bluetooth
mode,Bluetooth connection remains
active.
/
AUX IN
Switch USB input on the remote control.

60
80
5.3
800 mV +/-50mV
800 mV +/-50mV
20 Hz-20 kHz

Power supply:AC100-240V~,50/60 Hz
Power consumption: DC24V/2A
Standby power consumption: ≤1W
Dimensions (W x H x D):
570 x 73 x 80mm
Weight: 1.13kg
Built-in speakers: 2 x full range
(2.25”, 4 ohm)
Dimensions (W x H x D):
149 x 217 x 267 mm
Weight: 1.87 kg
Built-in speakers:1x low frequency
(5”, 6 ohm)
Subwoofer
15
on soundbar or press on the remote
control.
Soundbar