Philips HTL3320 User manual

User manual
Register your product and get support at
www.philips.com/welcome
3000 series
Soundbar Speaker
HTL3320

2
Contents
1 Important 3
Help and support 3
Safety 3
Care for your product 4
Care of the environment 4
Caution FCC and IC statement for Users
(USA and Canada only) 5
Compliance 5
2 Your SoundBar 6
Main unit 6
Wireless subwoofer 6
Remote control 6
Connectors 7
Prepare the Remote Control 8
Placement 8
3 Connect 9
Connect to HDMI (ARC) Socket 9
Connect to Optical Socket 9
Connect to AUX Socket 9
Connect to Power 10
Pair up with the subwoofer 10
4 Use your Soundbar 11
Turn ON and OFF 11
Auto Standby 11
Select Modes 11
Select Equalizer (EQ) Eect 11
Adjust theVolume 12
Bluetooth Operation 12
AUX / OPTICAL / HDMI ARC Operation12
USB Operation 13
5 Wall mount 13
6 Product specications 14
7 Troubleshooting 15

3
English
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure to
follow instructions, the warranty does not apply.
Help and support
For extensive online support, visit www.philips.
com/welcome to:
• downloadtheusermanualandthequick
start guide
• watchvideotutorials(availableonlyfor
selected models)
• ndanswerstofrequentlyanswered
questions (FAQs)
• emailusaquestion
• chatwithoursupportrepresentative.
Follow the instructions on the website to select
your language, and then enter your product
model number
Alternatively you can contact Consumer Care
in your country Before you contact, note down
the model number and serial number of your
product.Youcanndthisinformationontheback
or bottom of your product.
Safety
Risk of electric shock or re!
• Beforeyoumakeorchangeanyconnections,
make sure that all devices are disconnected
from the power outlet.
• Neverexposetheproductandaccessories
to rain or water Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately Contact Consumer Care to
have the product checked before use.
• Neverplacetheproductandaccessories
near naked flames or other heat sources,
including direct sunlight.
• Neverinsertobjectsintotheventilation
slots or other openings on the product.
• Wherethemainsplugoranappliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Battery(batterypackorbatteriesinstalled)
shall not be exposed to excessive heat such
assunshine,reorthelike.
• Disconnecttheproductfromthepower
outlet before lightning storms.
• Whenyoudisconnectthepowercord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Foridenticationandsupplyratings,see
the type plate at the back or bottom of the
product.
• Beforeyouconnecttheproducttothe
power outlet, ensure that the power voltage
matches the value printed on the back or
bottom of the product. Never connect the
product to the power outlet if the voltage is
dierent.
Risk of injury or damage to this product!
• Forwallmounting,thisproductmustbe
securely attached to the wall in accordance
with the installation instructions. Use
only the supplied wall mount bracket (if
available). Improper wall mounting may
result in accident, injury or damage. If you
have any query contact Consumer Care in
your country
• Neverplacetheproductoranyobjects
on power cords or on other electrical
equipment.
• Iftheproductistransportedin
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
• Partsofthisproductcanbemadeof
glass. Handle with care to avoid injury and
damage.

4
Risk of overheating!
• Neverinstallthisproductinaconned
space.Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
Risk of contamination!
• Donotmixbatteries(oldandnewor
carbon and alkaine, etc.).
• CAUTION:Dangerofexplosionifbatteries
are incorrectly replaced. Replace only with
the same or equivalent type.
• Removebatteriesiftheyareexhaustedor
if the remote control is not to be used for a
long time.
• Batteriescontainchemicalsubstances,they
should be disposed of properly
Risk of swallowing batteries!
• Theproduct/remotecontrolmaycontain
a coin/button type battery which can be
swallowed. Keep the battery out of reach of
children at all times! If swallowed, the battery
can cause serious injury or death. Severe
internal burns can occur within two hours
of ingestion.
• Ifyoususpectthatabatteryhasbeen
swallowed or placed inside any part of the
body seek immediate medical attention.
• Whenyouchangethebatteries,always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after you
replace the battery.
• Ifthebatterycompartmentcannotbe
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer
This is CLASS II apparatus with double insulation,
and no protective earth provided.
Care for your product
Useonlymicroberclothtocleantheproduct.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of with
normal household waste. Inform yourself about
the local separate collection system for electrical
and electronic products and batteries. Follow
local rules and never dispose of the product
and batteries with normal household waste.
Correct disposal of old products and batteries
helps prevent negative consequences for the
environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see battery
installation section.

5
English
Caution FCC and IC
statement for Users (USA and
Canada only)
FCC INFORMATION
Warning:
• Thisequipmentshouldbeinstalledand
operated with minimum distance 20cm
between the radiator & your body
• Changesormodicationstothisunitnot
expressly approved by the party responsible
for compliance could void the user's
authority to operate the equipment.
NOTE:This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules.These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorientorrelocatethereceiving
antenna.
• Increasetheseparationbetweenthe
equipment and receiver.
• Connecttheequipmentintoanoutlet
on a circuit dierent from that to which
the receiver is connected.
• Consultthedealeroranexperienced
radio /TV technician for help.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada's licence-exempt RSS(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference,
including interference that may cause
undesired operation of the device.
Compliance
This product complies with the radio interference
requirements of the European Community.
Hereby MMD Hong Kong Holding Limited
declares that this product is in compliance with
the essential requirements and other relevant
provisions of Directive 2014/53/EU.
YoucanndtheDeclarationofConformityon
www.p4c.philips.com.

6
2 Your SoundBar
Congratulations on your purchase, and welcome
toPhilips!Tofullybenetfromthesupportthat
Philips oers, register your Soundbar at www.
philips.com/welcome.
Main unit
This section includes an overview of the main
unit.
  
 
Remote Control Sensor
Standby indicator
When lit, shows that the Soundbar in the
Standby mode.
Soundbar’s LED indicator
• Aux / USB:When lit, shows that the
Soundbar in the Aux mode.When flash,
shows that the Soundbar in the USB
mode.
• BT:When lit, shows that the Soundbar
in the Bluetooth mode.
• Optical:When lit, shows that the
Soundbar in the optical mode.
• HDMI (ARC):When lit, shows that the
Soundbar in the HDMI ARC mode.
Source
Select an input source for the Soundbar.

Vol+/Vol- (Volume)
Increase or decrease volume.
 (Standby-On)
Switch the Soundbar On or to Standby.
Wireless subwoofer
This section includes an overview of the Wireless
subwoofer.
  

AC~ Socket
Connect to the power supply.

PAIR button
Press to enter the pairing mode for the
subwoofer.
Subwoofer indicator
• Whenthepoweristurnedon,the
indicator lights up.
• Duringwirelesspairingbetweenthe
subwoofer and the main unit, the
indicator blinks orange quickly
• Whenthepairingsucceeds,the
indicator lights up orange.
• Whenthepairingfails,theindicator
blinks orange slowly.
Remote control
This section includes an overview of the remote
control.
(Standby-On)
Switch the Soundbar on or to standby.
(Mute)
Mute or restore volume.
/ (Previous/Next)
Skip to the previous or next track in USB/
BT mode.

7
English
Connectors
This section includes an overview of the
connectors available on your Soundbar.
  


AC~
Connect to the power supply.

AUX
Audio input from, for example, an MP3
player (3.5mm jack).
USB
• AudioinputfromaUSBstoragedevice.
• Upgradesoftwareofthisproduct.
HDMI (ARC)
Connect to the HDMI input on the TV.

OPTICAL
Connect to an optical audio output on the
TV or a digital device.

Wall Bracket Screws
(Play/Pause)
Start, pause or resume play in USB/BT
mode.

+/- (Volume)
Increase or decrease volume.

Source buttons
AUX: Switch your audio source to the MP3
connection (3.5mm jack).
BT/PAIR: Switch to Bluetooth mode. Press
and hold to activate the pairing function in
Bluetooth mode or disconnect the existing
paired Bluetooth device.
OPTICAL: Switch your audio source to the
optical connection.
HDMI ARC: Switch your source to HDMI
ARC connection.
USB: Switch to USB mode.

EQ
Select Equalizer (EQ) eect.








8
Precautions Concerning Batteries
• WhentheRemoteControlisnottobe
used for a long time (more than a month),
remove the battery from the Remote
Control to prevent it from leaking.
• Ifthebatteriesleak,wipeawaytheleakage
inside the battery compartment and replace
the batteries with new ones.
• Donotuseanybatteriesotherthanthose
specied.
• Donotheatordisassemblebatteries.
• Neverthrowtheminreorwater
• Donotcarryorstorebatterieswithother
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
• Neverrechargeabatteryunlessitis
conrmedtobearechargeabletype.
Placement
Place the subwoofer at least 1 meter (3 feet)
away from your Soundbar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
10cm/4"
1m/3ft
Prepare the Remote Control
• TheprovidedRemoteControlallowsthe
unit to be operated from a distance.
• EveniftheRemoteControlisoperated
within the eective range 19.7 feet (6m),
remote control operation may be impossible
if there are any obstacles between the unit
and the remote control.
• IftheRemoteControlisoperatednear
other products which generate infrared rays,
or if other remote control devices using
infra-red rays are used near the unit, it may
operate incorrectly Conversely the other
products may operate incorrectly
First-time use:
The unit has a
pre-installed lithium
CR2025 battery. Remove
the protective tab to
activate the remote
control battery.
Replace the Remote Control Battery
• TheremotecontrolrequiresaCR2025,3V
Lithium battery
1Push the tab on the side of the battery tray
towards the tray.
2Now slide the battery tray out of the
remote control.
3Remove the old battery Place a new
CR2025 battery into the battery tray with
the correct polarity (+/-) as indicated.
4Slide the battery tray back into the slot in
the remote control

9
English
3 Connect
This section helps you connect your Soundbar
to aTV and other devices, and then set it up. For
information about the basic connections of your
Soundbar and accessories, see the quick start
guide.
Note
• Foridenticationandsupplyratings,seethetype
plate at the back or bottom of the product.
• Beforeyoumakeorchangeanyconnections,make
sure that all devices are disconnected from the
power outlet.
Connect to HDMI (ARC)
Socket
Your Soundbar supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI ARC
compliant, you can hear the TV audio through
your Soundbar by using a single HDMI cable.
HDMI (ARC)
HDMI (ARC)
1Using a High Speed HDMI cable, connect
the HDMI OUT (ARC)-TO TV connector
on your Soundbar to the HDMI ARC
connector on the TV.
• TheHDMI ARC connector on the TV
might be labeled dierently For details,
see the TV user manual.
2On yourTV turn on HDMI-CEC operations.
For details, see theTV user manual.
Note
• YourTVmustsupporttheHDMI-CECandARC
function. HDMI-CEC and ARC must be set to On.
• ThesettingmethodofHDMI-CECandARCmay
dier depending on the TV. For details about ARC
function, please refer to yourTV owner's manual.
• OnlyHDMI1.4compatiblecablescansupportthe
ARC function.
Connect to Optical Socket
OPTICAL
OPTICAL OUT
1Using an optical cable, connect the
OPTICAL connector on your Soundbar to
the OPTICAL OUT connector on the TV
or other device.
• Thedigitalopticalconnectormightbe
labeled SPDIF or SPDIF OUT.
Connect to AUX Socket
• Usea3.5mmto3.5mmaudiocable
(included) to connect the TV's headphone
socket to the AUX socket on the unit.
AUX
Headphone

10
AUX
AUDIO OUT
L
R
• UseaRCAto3.5mmaudiocable(not
included) to connect the TV’s audio output
sockets to the AUX socket on the unit.
Connect to Power
• BeforeconnectingtheACpowercord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or the
underside of the unit.
• ConnectthemainscabletotheAC~Socket
of the unit and then into a mains socket
• ConnectthemainscabletotheAC~Socket
of the subwoofer and then into a mains
socket.
Pair up with the subwoofer
Automatic Pairing
Plug the Soundbar and the subwoofer into the
mains sockets and then press on the unit or
remote control to switch the unit to ON mode.
The subwoofer and Soundbar will automatically
pair.
• Whenthesubwooferispairingwith
the Soundbar the Pair indicator on the
subwoofer will flash fast.
• Whenthesubwooferispairedwith
the Soundbar, the Pair indicator on the
subwoofer will light up steadily.
• DonotpressPairontherearofthe
subwoofer, except for manual pairing.
Manual Pairing
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1Unplug both units from the mains sockets
again, then plug them in again after 3
minutes.
2Press and hold the PAIR button on the rear
of the subwoofer for a few seconds.
The Pair indicator on the subwoofer will
rapidly blink.
3Then press on the unit or remote control
to switch the unit ON.
The Pair indicator on the subwoofer will
become solid when successful.
4If the Pair indicator still keeps blinking,
repeat step 1-3.
Tip
• Thesubwoofershouldbewithin6mofthe
Soundbar in an open area (the closer the better).
• Removeanyobjectsbetweenthesubwooferand
the Soundbar.
• Ifthewirelessconnectionfailsagain,checkif
there is a conflict or strong interference (e. g.
interference from an electronic device) around
the location. Remove these conflicts or strong
interferences and repeat the above procedures.
• Ifthemainunitisnotconnectedwiththe
subwoofer and it is in ON mode, the unit’s
POWER indicator will flash.

11
English
4 Use your
Soundbar
This section helps you use the Soundbar to play
audio from connected devices.
Before you start
• Makethenecessaryconnectionsdescribed
in the quick start guide and the user manual.
• SwitchtheSoundbartothecorrectsource
for other devices.
Turn ON and OFF
• Whenyourstconnecttheunittothemain
socket, the unit will be in STANDBY mode.
The Standby indicator will light up.
• Pressthe button on the remote control
to switch the main unit ON or OFF
• Disconnectthemainplugfromthemain
socket if you want to switch the unit o
completely
• IfaTVoranexternaldevice(OnlyforAUX
socket) is connected, the unit will switch on
automatically when the TV or the external
device is switched on.
Auto Standby
The unit automatically turns to Standby mode
after about 15 minutes if theTV or the external
unit is disconnected, switched o.
• Toswitchtheunitocompletelyremove
the mains plug from the mains socket.
• Pleaseturntheunitocompletelytosave
energy when not in use.
Select Modes
1Press the button repeatedly on the
unit or press the AUX, OPTICAL, HDMI
ARC, BT PAIR, USB buttons on the remote
control to select the desired mode.
The indicator light on the front of the
main unit will show which mode is
currently in use.
• Aux / USB:When lit, shows that the
Soundbar in the Aux mode.When flash,
shows that the Soundbar in the USB
mode.
• BT:When lit, shows that the Soundbar
in the Bluetooth mode.
• Optical:When lit, shows that the
Soundbar in the optical mode.
• HDMI (ARC):When lit, shows that the
Soundbar in the HDMI ARC mode.
Select Equalizer (EQ) Effect
Selectpredenedsoundmodestosuityour
video or music.
1Press the EQ button on the remote control
to select your desired preset equalizer
eect.
All LEDs on top of the bar lights up for
0.5 sec to indicate entering EQ selection
menu.
LED(s) lit up according to current EQ
mode as follows:
• •(Movie)
recommended for viewing Movies
• ••(Music)
recommended for listening to Music
• •••(News)
recommended for listening to News
Press the EQ button to switch among
the modes.

12
Adjust the Volume
1Press Vol+/Vol- (Volume) to increase or
decrease a volume level.
• Tomutesound,press (Mute).
• Torestorethesound,press (Mute)
again or press Vol+/Vol- (Volume).
Note:While adjusting the volume, the status LED
indicator will flash quickly.When the volume has
hit maximum/minimum value level, the status
LED indicator will flashes once.
Bluetooth Operation
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch,Android phone, or laptop), and then
youcanlistentotheaudiolesstoredonthe
device through your Soundbar speakers.
What you need
• ABluetoothdevicewhichsupports
BluetoothproleA2DPAVRCPandwith
Bluetooth version as 4.2 + EDR.
• Themaximumoperationalrangebetween
the Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
1Press the button repeatedly on the unit
or press BT button on the remote control
to switch the Soundbar to Bluetooth mode.
The Soundbar's indicator blinks blue.
2On the Bluetooth device, switch on
Bluetooth, search for and select PHILIPS
HTL3310 to start connection (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
During connection, the Soundbar's
indicator blinks blue.
3Wait until you hear "Paired" voice prompt
from the Soundbar.
If the successfully connected, the Blue
indicator will light up solidly
4 Selectandplayaudiolesormusiconyour
Bluetooth device.
• Duringplay,ifacalliscoming,musicplay
is paused. Play resumes when the call
ends.
• IfyourBluetoothdevicesupports
AVRCPprole,ontheremotecontrol
you can press / to skip to a
track, or press to pause/resume play.
5 To exit Bluetooth, select other source.
• WhenyourswitchbacktoBluetooth
mode, Bluetooth connection remains
active.
Note
• Themusicstreamingmaybeinterruptedby
obstacles between the device and Soundbar, such
as wall, metallic casing that covers the device, or
other devices nearby that operate in the same
frequency.
• IfyouwanttoconnectyourSoundbarwith
another Bluetooth device, press and hold BT/PAIR
on the remote control to disconnect the currently
connected Bluetooth device.
AUX / OPTICAL / HDMI
ARC Operation
Ensure that the unit is connected to theTV or
audio device.
1Press the button repeatedly on the unit
or press the AUX, OPTICAL, HDMI ARC
buttons on the remote to select the desired
mode.
2Operate your audio device directly for
playback features.
3Press the VOL +/- buttons to adjust the
volume to your desired level.

13
English
Tip
• WhileinOPTICAL/HDMIARCmode,ifthere's
no sound output from the unit and the status
Indicator flashes, you may need to activate PCM or
Dolby Digital Signal output on your source device
(e.g.TV, DVD or Blu-ray player).
USB Operation
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
1Insert the USB device.
2Press the Source button repeatedly on the
unit or press the USB button on the remote
control to select USB mode.
3During playback:
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
Tip
• TheunitcansupportUSBdeviceswithupto32
GB of memory.
• ThisunitcanplayMP3/WAV/WMA.
• SupportaUSBport:5V , 500mA.
5 Wall mount
Note
• Improperwallmountingmayresultinaccident,
injury or damage. If you have any query, contact
Consumer Care in your country.
• Beforewallmounting,makesurethewallcan
support the weight of your Soundbar.
• Beforewallmount,youneednotremovethe
four rubber feet at the bottom of the Soundbar,
otherwisetherubberfeetcannotbexedback.
Screw length/diameter
Depending on the type of wall mounting your
Soundbar, make sure that you use screws of a
suitable length and diameter.
3.5-4mm
4mm
> 25 mm
See the illustration in the quick start guide on
how to wall mount the Soundbar.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.

14
6 Product
specications
Note
• Specicationsanddesignaresubjecttochange
without notice.
Bluetooth
• Bluetoothproles:A2DP,AVRCP
• Bluetoothversion:4.2+EDR
• Frequencyband/Outputpower:
2402MHz~2480MHz/≤5dBm
• 2.4Gwirelessfrequencyrange:
2400MHz~2483MHz
• 2.4Gwirelessmaximumpower:6dBm
Main unit
• PowerSupply:100-240V~50/60Hz
• MAXOutputPowerbyspeaker:
25 W x 4 + 50W x 2
• PowerConsumption:25W
• StandbyConsumption:<0.5W
• USB:5V 500 mA
• FrequencyResponse:120Hz-20KHz
• AudioinputSensitivity(AUX):500mV
• SpeakersImpedance:8Ωx2+4Ω
• Dimension(WxHxD):
950 x 67.3 x 81.7 mm
• Weight:2.2kg
• Operatingtemperature:0°C-45°C
Subwoofer
• PowerSupply:100-240V~,50-60Hz
• OutputPower:100W
• PowerConsumption:25W
• Standbypowerconsumption:<0.5W
• FrequencyResponse:40Hz-120Hz
• Impedance:3Ω
• Dimensions(WxHxD):
150 x 412 x 310 mm
• Weight:5.4kg
• Operatingtemperature:0°C-45°C
Remote control
• Distance/Angle:6m/30°
• BatteryType:CR2025

15
English
7 Troubleshooting
Warning
• Specicationsanddesignaresubjecttochange
without notice.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/welcome.
No power
• EnsurethattheACcordisproperly
connected.
• EnsurethatthereispowerattheACoutlet.
• Press standby button on the remote
control or Soundbar to turn the Soundbar
on.
No sound
• Increasethevolume.PressVolumeUpon
the remote control or on the Soundbar.
• Press (MUTE) on the remote control to
ensure the Soundbar is not muted.
• Presssourcebuttonstoselectadierent
input source.
• WhenusingeitheroftheDigitalinput,if
there is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other
source, some TVs do not pass through
digital audio.
• YourTVmaybesettovariableaudiooutput.
Conrmthattheaudiooutputsettingisset
to FIXED or STANDARD, notVARIABLE.
Consult yourTV’s user manual for more
detailed information.
• IfusingBluetooth,ensurethatthevolume
on your source device is turned up and that
the device is not muted.
Remote control does not work
• Beforeyoupressanyplaybackcontrol
button,rstselectthecorrectsource.
• Reducethedistancebetweentheremote
control and the unit.
• Insertthebatterywithitspolarities(+/-)
aligned as indicated.
• Replacethebattery.
• Aimtheremotecontroldirectlyatthe
sensor on the front of the unit.
I can’t nd the Bluetooth name of this
unit on my Bluetooth device
• EnsuretheBluetoothfunctionisactivated
on your Bluetooth device.
• Re-pairtheunitwithyourBluetoothdevice.
This is a 15 mins power off function,
one of the ERPII standard requirement
for saving power
• Whentheunit’sexternalinputsignal
level is too low, the unit will be turned o
automatically in 15 minutes. Please increase
the volume level of your external device.
The subwoofer is idle or the indicator
of subwoofer do not light up
• Pleaseunplugpowercordfromthemains
sockect, and plug it in again after 3 minutes
to resent the subwoofer.

The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
ThetermsHDMI,HDMIHigh-DenitionMultimediaInterface,andtheHDMILogoaretrademarksor
registered trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are
trademarks of Dolby Laboratories.
Specicationsaresubjecttochangewithoutnotice.
Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license.This product has been manufactured by and is sold under
the responsibility of MMD Hong Kong Holding Limited. or one of its aliates, and MMD
Hong Kong Holding Limited. is the warrantor in relation to this product.