Philips MCM166X User manual

EN User manual
MCM166/12

English
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
h Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
i Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
j Only use attachments/accessories specified by the
manufacturer.
k Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
l Unplug this apparatus during lightning storms
or when unused for long periods of time.

m Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
n Battery usage CAUTION – To prevent battery leakage which
may result in bodily injury, property damage, or damage to
the unit:
Install all batteries correctly, + and - as marked on the
•
unit.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Remove batteries when the unit is not used for a long
•
time.
o Apparatus shall not be exposed to dripping or splashing.
p Do not place any sources of danger on the apparatus (e.g.
liquid filled objects, lighted candles).
q This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eiae.org.
rWhere the MAINS plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable.

Warning
Never remove the casing of this Micro Hi-Fi.•
Never lubricate any part of this Micro Hi-Fi.•
Never place this Micro Hi-Fi on other electrical equipment.•
Keep this Micro Hi-Fi away from direct sunlight, naked flames or heat.•
Never look into the laser beam inside the Micro Hi-Fi.•
Ensure that you always have easy access to the power cord, plug or•
adaptor to disconnect the Micro Hi-Fi from the power.
Caution
Use of controls or adjustments or performance of procedures other•
than herein may result in hazardous radiation exposure or other
unsafe operation.
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can impair your hearing.
•
This product can produce sounds in decibel ranges that may
cause hearing loss for a normal person, even for exposure less
than a minute. The higher decibel ranges are offered for those
that may have already experienced some hearing loss.
Sound can be deceiving. Over time your hearing ‘comfort
•
level’ adapts to higher volumes of sound. So after prolonged
listening, what sounds ‘normal’ can actually be loud and
harmful to your hearing. To guard against this, set your volume
to a safe level before your hearing adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.
•
Slowly increase the sound until you can hear it comfortably•
and clearly, without distortion.

Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally ‘safe’ levels,
•
can also cause hearing loss.
Be sure to use your equipment reasonably and take
•
appropriate breaks.
Be sure to observe the following guidelines when using your
headphones.
Listen at reasonable volumes for reasonable periods of time.
•
Be careful not to adjust the volume as your hearing adapts.•
Do not turn up the volume so high that you can’t hear what’s•
around you.
You should use caution or temporarily discontinue use in
•
potentially hazardous situations. Do not use headphones while
operating a motorized vehicle, cycling, skateboarding, etc.; it
may create a traffic hazard and is illegal in many areas.
Notice
This product complies with the radio interference
requirements of the European Community.
This product complies with the requirements of the
following directives and guidelines: 2004/108/EC +
2006/95/EC
Any changes or modifications made to this device that are not
expressly approved by Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Recycling
Your product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.

When you see the crossed-out wheel bin symbol attached
to a product, it means the product is covered by the
European Directive 2002/96/EC:
Never dispose of your product with other household
waste. Please inform yourself about the local rules on the
separate collection of electrical and electronic products.
The correct disposal of your old product helps prevent potentially
negative consequences on the environment and human health.
Your product contains batteries covered by the European Directive
2006/66/EC, which cannot be disposed of with normal household
waste.
When you see the crossed-out wheel bin symbol with
the chemical symbol ‘Pb’, it means that the batteries
comply with the requirement set by the directive for
lead:
Please inform yourself about the local rules on separate
collection of batteries. The correct disposal of batteries
helps prevent potentially negative consequences on the environment
and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam
sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
Windows Media and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Pb

This Micro Hi-Fi includes this label:
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen
er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk støt, skal apparatet ikke
utsettes for regn eller fuktighet.
2 Your Micro Hi-Fi
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.Philips.com/welcome.
Introduction
With this Micro Hi-Fi, you can enjoy music from audio discs and USB
devices directly and other external devices, or listen to radio stations.
The Micro Hi-Fi offers you multiple sound effect settings that enrich
sound with Digital Sound Control (DSC) and Dynamic Bass Boost (DBB).
The Micro Hi-Fi supports the following media formats:

What’s in the box
Check and identify the contents of your package:
Main unit
•
Loudspeaker boxes x 2•
Remote control•
MP3 link cable•

Overview of the main unit

a Display panel
Show current status.
•
b SOURCE
Select a source: Disc, TUNER, USB or MP3 LINK.
•
c PROG
Program tracks.
•
Program radio stations.•
Select 12 hour or 24 hour format.•
d CLOCK
Set the clock.
•
View the clock.•
During play, select display information.•
e
Stop play or erase a program.
•
f PRESET/ALBUM+/-
Select a preset radio station.
•
Skip to the previous/next album.•
g /
Skip to the previous/next track.
•
Search within a track/ disc/USB.•
Tune to a radio station.•
Adjust time.•
h MP3 LINK
Jack for an external audio device.
•
i VOLUME
Adjust volume.
•
j
Jack for a USB mass storage device.
•
k
Start or pause play.
•
l DBB
Turns on or off dynamic bass enhancement.
•

m DSC
Select a preset sound setting: POP, JAZZ, CLASSIC or
•
ROCK.
n STANDBY-ON
Turn on the Micro Hi-Fi, switch to standby mode, or
•
switch to Eco Power Standby.
o PULL TO OPEN
Open or close the disc tray.
•

Overview of the remote control

a POWER
Turn on the Micro Hi-Fi, switch to standby mode, or
•
switch to Eco Power Standby.
b Source selection keys (DISC, TUN, USB,MP3 LINK)
Select a source: CD, TUNER, USB or MP3 LINK.
•
c SLEEP
Set the sleep timer.
•
d SHUF
Play tracks randomly.
•
e TIMER
Set the alarm timer.•
f /
Search within a track/ disc/USB.
•
Tune to a radio station.•
Adjust time.•
g /
Skip to the previous/next track.
•
h DBB
Turns on or off dynamic bass enhancement.
•
i
Stop play or erase a program.
•
j VOL +/-
Adjust volume.
•
k Numeric keypad
Select a track from a disc directly.
•
l CLOCK/DISPLAY
Set the clock.
•
View the clock.•
During play, select display information.•
m PROG
Program tracks.
•

Program radio stations.•
Select 12 hour or 24 hour format.•
n MUTE
Mute volume.
•
o ALB/PRESET+/-
Skip to the previous/next album.
•
Select a preset radio station.•
p DSC
Select a preset sound setting: POP, JAZZ, CLASSIC or
•
ROCK.
q TIMER ON/OFF
Turn on or off alarm timer.
•
r REP ALL
Play all tracks repeatedly.
•
s REP
Play a track repeatedly.
•
3 Connect
Connect speakers

Note
Insert the stripped portion of each speaker wire into the socket•
completely.
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the same or higher•
than the supplied speakers. Refer to the Specifications section of this
manual.
To insert each speaker wire: Hold down the socket flap. Insert the
speaker wire fully. Release the socket flap.
1For the right speaker, find the sockets on the main unit marked
‘RIGHT’.
2Insert the red wire to the red (+) socket.
3Insert the black wire into the black (-) socket.
4For the left speaker, find the sockets on the main unit marked
‘LEFT’.
5Repeat steps 2-3.

Connect power
Caution
Risk of product damage! Ensure that the power supply voltage•
corresponds to the voltage printed on the back or the underside of
the Micro Hi-Fi.
Before connecting the AC power cord, ensure you have completed
•
all other connections.
1Connect the AC power cord to the wall socket.
4 Get started
Caution
Use the controls only as stated in this user manual.•

Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of your Micro Hi-Fi.The model number and serial number are on the
back of your Micro Hi-Fi.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat, sunshine or fire.•
Never discard batteries in fire.
To replace the remote control battery:
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity (+/-) as indicated.
3Close the battery compartment.
3
1
2

Note
Before pressing any function button on the remote control, first select•
the correct source with the remote control instead of the main unit.
If you are not going to use the remote control for a long time, remove
•
the batteries.
Auto install radio stations
When you connect the Micro Hi-Fi to the power supply for the first
time, or no radio station is stored in this Micro Hi-Fi, Plug and Play is
activated to store all available radio stations automatically.
1Connect the Micro Hi-Fi to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto install - press the»
PLAY button) is displayed.
2Press on the main unit to start installation.
[AUTO] (auto) is displayed.»
The Micro Hi-Fi automatically store radio stations with»
sufficient signal strength.
When all the available radio stations are stored, the first»
preset radio station is broadcast automatically.
Set clock
1Press and hold CLOCK/DISPLAY to activate the clock setting
mode.
The 12 hour or 24 hour format is displayed.»
2Press PROG repeatedly to select 12 hour or 24 hour format.
3Press CLOCK/DISPLAY to confirm.
The hour digits are displayed and begin to blink.»
4Press / to set the hour.

5Press CLOCK/DISPLAY to confirm.
The minute digits are displayed and begin to blink.»
6Press / to set the minute.
7Press CLOCK/DISPLAY to confirm.
Tip
To view the clock during play, press• CLOCK/DISPLAY repeatedly
until the clock is displayed.
Turn on
1Press POWER.
The Micro Hi-Fi switches to the last selected source.»
Switch to standby
1Press POWER to switch the Micro Hi-Fi to standby mode.
The backlight on the display panel is reduced.»
The clock (if set) appears on the display panel.»
To switch the Micro Hi-Fi to Eco Power Standby mode:
1In the standby mode, press and hold POWER for more than 2
seconds.
The backlight on the display panel turns off.»
5 Play disc/USB
Play disc
1Press DISC to select the disc source.
2Lift the lid of the CD compartment.

3Insert a disc with the printed side facing up, then close the disc
tray.
4Press to start play.
Play from USB
Note
• Ensure that the USB device contains playable audio contents for
supported formats.
1Insert the USB plug of a USB device into the socket.
2Press USB to select the USB source.
The total number of tracks is displayed.»
3Press ALB/PRESET+/- to select a folder.
4Press / to select a file.
5Press to start play.