Philips MCM196D User manual

Quick Start Guide
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
AM Antenna
Quick Start Guide
2
User Manual
User Manual
MCM196D
1 Dock & 8 Dock
Adapters for iPod
Pull out the insulation
plastic sheet.
Remote Control
MCM196D_37 QSG_Eng 14/5/07, 13:061
All manuals and user guides at all-guides.com
all-guides.com

1
2
3
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
5
1
2
3
4
Setting the clock
For radio reception, connect the supplied AM antenna to the
AM aerial terminal.
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press and hold DISPLAY/CLOCK
(CLOCK/MENU on the remote control)
for 2 seconds.The clock digits for the hours flash.
Press TUNING ¡1 / 2™ to set the hours.
Press DISPLAY/CLOCK again.
The clock digits for the minutes flash.
Press TUNING ¡1 / 2™ to set the minutes.
Press DISPLAY/CLOCK to confirm the time.
speaker
(right)
speaker
(left)
FM wire antenna
FM
AERIAL
AM
AERIAL
AM loop
antenna
AC power cord
n
1
2
3
MICRO SYSTEM MCM196D
MCM196D_37 QSG_Eng 14/5/07, 13:062
All manuals and user guides at all-guides.com

1
2
3
4
5
Tip
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Playing a disc
1
2
Select TUNER source.
Press PROGRAM on the set for more than 2 seconds to program all
available stations in order of waveband.
Press ALBUM/PRESET 4 3 until the desired preset station is
displayed.
Programming and Listening to
radio stations
3
Select CD source.
Press OPEN•CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN•CLOSE to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or TUNER,
for example).
–Then select the desired function ( 2; ,
í , ë for example).
MCM196D_37 QSG_Eng 14/5/07, 13:063
All manuals and user guides at all-guides.com

Playing iPod using the dock
1Select the correct dock adaptor supplied, then snap the adaptor into the correct dock connector (iPod) to
provide a snug fit for the player.
●The indication on the adaptor’s back fits specific iPod player.
2Correctly place your player in the correct dock connector.
3Connect the cables of the dock to DOCKING IN jacks on the main set correspondingly.
4Press SOURCE repeatedly or iPod to select iPod source.
●The connected player will play automatically.
●The iPod battery will be charged in either normal standby mode or power-on mode.The charging will not be
available in the Eco power standby mode.
Tip
Refer to the user manual supplied for detailed descriptions of
“Compatible portable player”, “Selecting the correct dock
adaptor”,“Installing the dock adaptor”, and the important
notes for dock operation.
Dock cable
CRoyal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com PDCC-JH-0720 GB
speaker
(right)
speaker
(left)
FM
AERIAL
AM
AERIAL
Portable player
Dock
n
MCM196D_37 QSG_Eng 14/5/07, 13:064
All manuals and user guides at all-guides.com