
PC StationCenterAccess Point
12
Wireless Music Center + Station WACS7000
Connect to your PC
Connect Philips Wireless Music Center to your PC if you want to do
the following:
●Access music files stored on your PC from Philips Music Center/
Station’s UPnP source
●Manage the music content stored on Philips Music Center from your
PC
●Update Center’s Gracenote®music recognition service database for
the latest disc information
●Upgrade firmware of Philips Music Center + Station
GB
To connect to Philips Music Center, your minimum PC requirements must be:
UPnP playback
●Windows 2000/XP (Home or Professional)
●Pentium III 500MHz processor or higher
●256MB RAM
●CD-ROM Drive
●Ethernet Adapter (for wired connection)/ Wireless
Network Adaptor 802.11 b/g (for wireless connection)
●Free hard disk space of 500MB
●Windows Media Player® 9.0 or later installed
Set up connection between Center and your PC
WIRED WIRELESS
Connect supplied
(Orange) Ethernet
cable from Center to
your PC
1
Install Wireless Audio Device Manager (WADM)
and Philips Media Manager (PMM)
Launch WADM. Is your connection established?
2
YES
Congratulations!
Connection between
Center and your PC
is successful!
NO
Build new connection
OR
Check your network
settings
Use WADM Use UPnP
Set up a wired connection
Set up a wireless connection
PC StationCenterAccess Point
12
PC Station
Center
12
3
Connect Center to PC directly with the supplied (orange) Ethernet
cable
OR
Connect Center directly to Access Point with the supplied (orange)
Ethernet cable
After WADM is installed, launch WADM
●connection is made if Center is found
●build new connection if Center is not found
1
2
a. On Center :
●Press the MENU button
●Select Settings>Network >
Wireless > (Select desired net-
work) >
(Input the encryption key) >
Automatic > Apply Settings >
Yes
1
Tips:
●Make sure that Ethernet port is 'Enabled' to make WADM connection.
For more information, see
For more information, see
a. On Center :
●Select HD source, and then
press the MENU button
●Select Station Mgnt > Add
New Station
b. On Station :
●Press the MENU button
●Select Installation Mode
2
a. Enable your wireless
Access Point/router
b. Configure Network from
Center : Select MENU>Settings
>Network > Wireless > (Select
desired network) > (Input the
encryption key) > Automatic >
Apply Settings > Yes
a. Center: Enter Installation
Mode
b. Station: Enter Installation
Mode
1
2
For more information, see
Do you want to connect wired or wirelessly?
Do you have a wireless Access Point?
YES NO
a. On Center :
●Press the MENU button
●Select Information > WiFi >
WEP Key to retrieve WEP key
b. On PC :
●Select Start > Control Panel >
Network Connections >
Enable Wireless Network
Connections > View Available
Wireless Networks > Select
Center’s network > Input
retrieved Center’s WEP key
1
a. On Center :
●Select HD source, and then
press the MENU button
●Select Station Mgnt > Add
New Station
b. On Station :
●Press the MENU button
●Select Installation Mode
2
Tips:
●Check that PC’s wireless network adaptor is working.
●Locate Center closer to your wireless Access Point.
●Make sure that DHCP is enabled on your wireless Access Point.
If not available, choose Static and key in IP configuration
WACS7000_CPC-Eng 2006.8.11 14:00 Page 1