Philips Streamium WACS7000 User manual

Connect/Setup
Enjoy
FAQ
Quick start guide
Read Me First!
EN
Wireless Music Center + Station
WACS7000

Set up connection between the Center and Station
The first time you set up a Wi-Fi connection, place
the Center and Station side by side on a flat and
firm surface
Center/Station:
•The screen lights up in a few seconds
Auto installation/connection starts
• Both the Center and Station are switched on
The HD screen appears if the Station is
connected to the Center
(it takes about 1.5 minutes)
Connect/Setup
Center
Station
AC
AC
Connect WACS7000 to power supply - connect the Center
first followed by the Station
Relocate the Center and Station as desired: plug and stream*
•Simply unplug the Center or Station and power them up in your
preferred rooms.
•You will be able to stream* the hard disk music between the
Center and Station
IMPORTANT!
•Avoid installing in between thick walls. Separating the Center and
Station by 2 or more walls may cause poor streaming connection.
•For better Wi-Fi reception, you can adjust the Wi-Fi antenna, or
adjust the location of the Center and Station (e.g. shorten the
distance between the Center and Station).
: indicates maximum reception; : indicates minimum reception
•Forwall mounting, please refer to the User Manual, Appendix:
How to mount your Center and Station onto walls.
You may need assistance from a qualified service personnel.
* Streaming is the process in which data (music in this case) is
transferred from one device to another device or many other
devices.

Play Hard Disk (HD)
You can centrally store up to 1500 audio CDs in the 80GB* hard disk on
the Center.
Enjoy
* Available storage space for music is around 75GB, due to capacity reserved for system purpose
Press 2II /OK to start playback
To change your playback options,
a. Press 1once or more times to enter previous option lists
b. Use the navigation controls 3 4 1 2 to select
c. Press OK or 2to confirm
To stop playback, press STOP ■
Press SOURCE once or more times to select HD source
(or press HARDDISK on the remote control)
Use the navigation controls 3 4 1 2 to select your playback
options (Demo tracks are stored under All tracks)
To switch on the Center, press STANDBY-ON y
Tips:
By default, the 2-way remote control works with the Center only. To operate the Station using
the 2-way remote control,
•Press and hold REFRESH until the Select Device screen appears on the display of the
Center’s remote control
•Press the navigation controls 3or 4and 2to select the Station, and then press OK
For more information, see User Manual, Preparation: Using the remote control.

1
User manual
Manuel d'utilisation
Manual del usuario
1
User manual
Manuel d'utilisation
Manual del usuario
Wireless Music Center WAC7000
2-way remote control
What’s in the box
Wireless Music Station WAS7000
User manualQuick start guide1-way remote control
2 x AA batteries
2-way remote control
4 x AAA batteries
1 x Ethernet cable 2 x Mounting kit
for center & station
for Center
for Station
2 x FM wire antennasPC Suite CDConnect to your PC
•Insertbatteries into the remote control as shown
1-way remote control
Before using the remote control:

IMPORTANT!
•It takes some time to convert the recorded CD music to MP3 files.
•Always press and hold STANDBY-ON yto switch the set to ECO POWER (power-saving
mode) before removing its power plug.
•TorecordaCDduring playback (for audio CD only), see User Manual, HD: Building music
library on Center.
•To record from Radio or external source, see User Manual, HD: Building music library
on Center.
•You can edit the track information and import MP3/WMA files from PC using the supplied Wireless
Audio Device Manager (WADM). For details, see the manual Connect to your PC.
Build your music library on the hard disk in the Center by Recording from CDs,
Importing MP3/WMA files from PC or Recording from Radio or external source.
Recording from CDs
Insert a CD into the CD loader on the Center, with the graphic
printed side of the CD facing you
•Displayshows Reading CD
•Listof CD tracks appears
(For CD recorded with MP3/WMA music files:
To enter a track list, press 2on a highlighted file folder)
In the track list screen, press RECORD
•List of tracks with checkboxes appears
To start recording the whole CD, press RECORD
(To rip part of the CD, press 2or MARK/UNMARK to select/
deselect the tracks to be recorded, and then press RECORD)
• CD-Rec appears. Display shows the album name of the track
being recorded
• Center will return to CD mode when recording is complete
To record from another CD, repeat Steps 1to 3above
(Up to 8 CDs can be ripped consecutively)
Build a music library on the Center

Search for your desired tracks/albums
Search by keywords
The keyword can be any word in the item you wish to search for. By entering a
keyword, you can quickly find all relevant items containing the same keyword (in
uppercase or lowercase letters)
Use the navigation controls 3 4 1 2 to enter the desired option
list under tracks, albums, artists or playlists
Press SEARCH on the remote control
•Atext box appears
a. Press the alphanumeric keys repeatedly to input the
keywords (maximum 8 characters)
b. To delete an entry before the cursor, press 4
c. Press 1or 2to move the cursor backward / forward
Press OK to start searching
• Display shows: Searching .... Searching starts from the
beginning of the current option list
• The matched items appear at the top of the list
Online search of CD information
WAC7000 Center allows you to check if the current CD information can be found
in the latest Gracenote® music recognition service database via the Internet. The CD
information will be stored together with the music in the music library on the Center.
For details, see User Manual, Gracenote CD Information: To Update
Gracenote music recognition database .
Press HD to select HD source

To switch on the Station, press STANDBY-ON y
•The HD screen appears if the Station is connected to the Center
MUSIC FOLLOWS ME
As you move around at home, let music move with you, either from the Center
to Station or from Station to Center.
Stream music between the Center and Station
Play music library of the Center on the Station
You can play the music library (HD) of the Center on the Station.
Check that the Center is switched on or in standby mode
Follow Steps 3to 6under Play HD to play the music library of the
Center on the Station
On the source unit (Center or Station) where the music is
playing
a. On HD source, select and play the album or playlist you wish to
play on the destination unit
b. Press MUSIC FOLLOWS ME to activate
•The icon appears
On the destination unit (Center or Station) where the music will
continue
a. Check that the destination unit is switched on or is already in standby
mode
b. Press MUSIC FOLLOWS ME
•Selected music continues on the destination unit
•On the source unit, the music stops. The icon disappears
c. To stop MUSIC FOLLOWS ME, press STOP ■

Tips:
•Checkthatthe Stations are switched on or are already in standby mode.
•To broadcast again
Before you press MUSIC BROADCAST, check if you need to
deactivate any earlier broadcasting. If the icon is still active in the Center
or Station’s display, press STOP 9on Center. Then, follow Steps 1to 2 mentioned above.
•Other functions are unavailable during MUSIC BROADCAST
•ToexitMUSIC BROADCAST on a Station, press STOP 9on the Station.
Stream music between the Center and Station
Tips:
•Always press MUSIC FOLLOWS ME on the source unit before pressing
MUSIC FOLLOWS ME on the destination unit.
•MUSIC FOLLOWS ME will be automatically deactivated if you do not
press MUSIC FOLLOWS ME on the destination unit within 5 minutes
•AfterMUSIC FOLLOWS ME is activated on the destination unit, you
can select other tracks or source for playback on the source unit.
MUSIC BROADCAST
MUSIC BROADCAST allows you to broadcast music from the Center
to the Stations.
On the Center
a. On HD source, select and play the album or playlist you
wish to broadcast to the Stations
b. Press MUSIC BROADCAST to activate
•The icon appears on the Center and Station,
a 5-second countdown starts
On the Center and Stations
•Selected music starts to play simultaneously

Check that the USB device is properly connected to the Center
Follow Steps 2to 3under Build a Music library on the Center
•Thedisplay shows transferring .... The number of tracks
transferred/to be transferred appears
•Transferred tracks are saved under MUSIC in the USB device
Play music from USB devices
You can use USB flash memory (USB 2.0 or USB1.1) and USB flash players (USB 2.0
or USB1.1) with the Center or Station.
Play or record to USB mass storage devices
Insert the USB plug of the USB device into the socket on the
Center or Station
Press SOURCE once or more to select USB
•The icon appears
•ListofCD tracks appears
(For CD recorded with MP3/WMA music files: To enter a track list,
press 2on a highlighted file folder)
Press 2II /OK to start playback
Use the navigation controls 3 4 1 2 to select your playback
options
Transfer music to USB devices
On the Center, press HARDDISK to select HD

To find out more about the product’s features and how to activate them, please read the
supplied manual:
• User manual: for further details and troubleshooting
• Connect to your PC: to connect to your PC, transfer and manage your music
collection using the Philips Wireless Audio Device Manager (supplied), set up
networks, and playback music between the Center/Station and UPnP-enabled device
Tips:
•Tolearn how to play CDs, see CD Section on the User Manual.
Press SOURCE once or more times to select Radio
Listen to FM Radio
Connect the supplied FM wire antenna to the Center and Station
(see User manual, Installation)
a. Press MENU
b. Press 3or 4and 2to select Autostore radio
• The display shows: Autostore Please wait...
After all stations are stored, the first autostored preset station
will then play automatically
• You can store up to 60 preset radio stations in the memory
(including a maximum of 10 RDS stations).
Press 3or 4and 2to select your desired station
Center
Station