Philips DECT1224S/05 User manual

Welcome
Quick start guide
1Connect
2Install
3Enjoy
philips
Problem
!Check the connections.
!Use the line cord provided in
the box.
!Try to place the base station at
least one metre away from any
electrical appliances.
!Make sure the product is plugged.
!Recharge the batteries.
!Check you have one DSL filter
plugged directly on each line
socket used in the house.
!Check the modem and the phone
are plugged in correct filter slot
(one specific for each).
!Filters can be defective, replace
it and make another test.
Troubleshooting
For expended overview see user manual page 25.
Tip
!No dialling tone.
!Poor audio quality.
!No symbol on the display.
!No Caller ID, poor connection
quality with broadband DSL
Internet.
Need help ?
User manual
See the user manual that came with your DECT 122.
Online help
www.p4c.philips.com
To set or change the alarm clock settings
1. Press and press Down to reach CLOCK/ALARM.
2. Press and press Down to reach SET ALARM.
3. Press ,scroll to select OFF or ON ONCE or
ON DAILY.
4. Press to confirm.
If you select ON ONCE or ON DAILY :
Enter the time and press to confirm.
To rename a handset
1. Press and press Down to reach PERSONAL SET.
2. Press and press Down to reach HANDSET NAME.
3. Press and enter the name (text entry, see manual page 10).
4. Press to confirm.
TIP :When the alarm rings,
press any key to stop the alarm.
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2

What’s in the box
Handset
DECT 122
Base station
DECT 122
Power supply
unit
Line cord
Quick start guide User manual
1Connect
Connect the base station
A
!Insert the plug of the power
cord into the socket on the
bottom of the base station.
!Insert the plug of the line
cord into the socket on the
bottom of the base station.
!Plug the power supply unit
into your power outlet.
!Plug the line cord into the
line socket.
2Install
Always use rechargeable batteries.
Insert batteries
Guarantee
Rechargeable
batteries
Always use the cables and
batteries that came with your
phone.
In multipack sets you will find additional handsets, chargers power supplies,
line cords and batteries.
OR
A
Charge handset for
24 hours
B
To set the date and time
1. Press .
2. Press Down to reach CLOCK/ALARM.
3. Press to display DATE/TIME.
4. Press and enter the current date.
5. Press and enter the current time.
6. Press to confirm the settings.
3Enjoy
To make a call
Press and dial the number.
TIP :You can predial the number
before seizing the line.
To answer a call
Press .
To adjust earpiece volume while on line
Press Up or Down to increase or decrease the volume.
To set the handset ring melody
1. Press and press Down to reach PERSONAL SET.
2. Press to select HANDSET TONE.
3. Press and press Down to reach RING MELODY.
4. Press , the melody is played.
5. Press Up or Down to browse the list of melodies.
6. Press to confirm your choice.
3111 285 25771
To save a name & number in the phonebook
1. Press and press Down to reach PHONEBOOK.
2. Press to select ADD NUM.
3. Press and enter the name.
4. Press to save the name.
5. Enter the number and press to save the number.
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 1

What’s in the box
Handset
DECT 122
Base station
DECT 122
Power supply
unit
Line cord
Quick start guide User manual
1Connect
Connect the base station
A
!Insert the plug of the power
cord into the socket on the
bottom of the base station.
!Insert the plug of the line
cord into the socket on the
bottom of the base station.
!Plug the power supply unit
into your power outlet.
!Plug the line cord into the
line socket.
2Install
Always use rechargeable batteries.
Insert batteries
Guarantee
Rechargeable
batteries
Always use the cables and
batteries that came with your
phone.
In multipack sets you will find additional handsets, chargers power supplies,
line cords and batteries.
OR
A
Charge handset for
24 hours
B
To set the date and time
1. Press .
2. Press Down to reach CLOCK/ALARM.
3. Press to display DATE/TIME.
4. Press and enter the current date.
5. Press and enter the current time.
6. Press to confirm the settings.
3Enjoy
To make a call
Press and dial the number.
TIP :You can predial the number
before seizing the line.
To answer a call
Press .
To adjust earpiece volume while on line
Press Up or Down to increase or decrease the volume.
To set the handset ring melody
1. Press and press Down to reach PERSONAL SET.
2. Press to select HANDSET TONE.
3. Press and press Down to reach RING MELODY.
4. Press , the melody is played.
5. Press Up or Down to browse the list of melodies.
6. Press to confirm your choice.
3111 285 25771
To save a name & number in the phonebook
1. Press and press Down to reach PHONEBOOK.
2. Press to select ADD NUM.
3. Press and enter the name.
4. Press to save the name.
5. Enter the number and press to save the number.
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 1

What’s in the box
Handset
DECT 122
Base station
DECT 122
Power supply
unit
Line cord
Quick start guide User manual
1Connect
Connect the base station
A
!Insert the plug of the power
cord into the socket on the
bottom of the base station.
!Insert the plug of the line
cord into the socket on the
bottom of the base station.
!Plug the power supply unit
into your power outlet.
!Plug the line cord into the
line socket.
2Install
Always use rechargeable batteries.
Insert batteries
Guarantee
Rechargeable
batteries
Always use the cables and
batteries that came with your
phone.
In multipack sets you will find additional handsets, chargers power supplies,
line cords and batteries.
OR
A
Charge handset for
24 hours
B
To set the date and time
1. Press .
2. Press Down to reach CLOCK/ALARM.
3. Press to display DATE/TIME.
4. Press and enter the current date.
5. Press and enter the current time.
6. Press to confirm the settings.
3Enjoy
To make a call
Press and dial the number.
TIP :You can predial the number
before seizing the line.
To answer a call
Press .
To adjust earpiece volume while on line
Press Up or Down to increase or decrease the volume.
To set the handset ring melody
1. Press and press Down to reach PERSONAL SET.
2. Press to select HANDSET TONE.
3. Press and press Down to reach RING MELODY.
4. Press , the melody is played.
5. Press Up or Down to browse the list of melodies.
6. Press to confirm your choice.
3111 285 25771
To save a name & number in the phonebook
1. Press and press Down to reach PHONEBOOK.
2. Press to select ADD NUM.
3. Press and enter the name.
4. Press to save the name.
5. Enter the number and press to save the number.
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 1

Welcome
Quick start guide
1Connect
2Install
3Enjoy
philips
Problem
!Check the connections.
!Use the line cord provided in
the box.
!Try to place the base station at
least one metre away from any
electrical appliances.
!Make sure the product is plugged.
!Recharge the batteries.
!Check you have one DSL filter
plugged directly on each line
socket used in the house.
!Check the modem and the phone
are plugged in correct filter slot
(one specific for each).
!Filters can be defective, replace
it and make another test.
Troubleshooting
For expended overview see user manual page 25.
Tip
!No dialling tone.
!Poor audio quality.
!No symbol on the display.
!No Caller ID, poor connection
quality with broadband DSL
Internet.
Need help ?
User manual
See the user manual that came with your DECT 122.
Online help
www.p4c.philips.com
To set or change the alarm clock settings
1. Press and press Down to reach CLOCK/ALARM.
2. Press and press Down to reach SET ALARM.
3. Press ,scroll to select OFF or ON ONCE or
ON DAILY.
4. Press to confirm.
If you select ON ONCE or ON DAILY :
Enter the time and press to confirm.
To rename a handset
1. Press and press Down to reach PERSONAL SET.
2. Press and press Down to reach HANDSET NAME.
3. Press and enter the name (text entry, see manual page 10).
4. Press to confirm.
TIP :When the alarm rings,
press any key to stop the alarm.
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2

Welcome
Quick start guide
1Connect
2Install
3Enjoy
philips
Problem
!Check the connections.
!Use the line cord provided in
the box.
!Try to place the base station at
least one metre away from any
electrical appliances.
!Make sure the product is plugged.
!Recharge the batteries.
!Check you have one DSL filter
plugged directly on each line
socket used in the house.
!Check the modem and the phone
are plugged in correct filter slot
(one specific for each).
!Filters can be defective, replace
it and make another test.
Troubleshooting
For expended overview see user manual page 25.
Tip
!No dialling tone.
!Poor audio quality.
!No symbol on the display.
!No Caller ID, poor connection
quality with broadband DSL
Internet.
Need help ?
User manual
See the user manual that came with your DECT 122.
Online help
www.p4c.philips.com
To set or change the alarm clock settings
1. Press and press Down to reach CLOCK/ALARM.
2. Press and press Down to reach SET ALARM.
3. Press ,scroll to select OFF or ON ONCE or
ON DAILY.
4. Press to confirm.
If you select ON ONCE or ON DAILY :
Enter the time and press to confirm.
To rename a handset
1. Press and press Down to reach PERSONAL SET.
2. Press and press Down to reach HANDSET NAME.
3. Press and enter the name (text entry, see manual page 10).
4. Press to confirm.
TIP :When the alarm rings,
press any key to stop the alarm.
QSG DECT122_Master UK_6pages.qxd 05.09.2005 10:16 Seite 2