Philips FC8600 User manual

ServiceManual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Vacuum cleaner
FC8600
/C
08/10
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Colour : Oxford Blue
- Power consumption : 1600W
(IEC) 230V
- Maximum Air displacement : 37 l/s
- Vacuum : 280 mbar / 28.0 kPa
- Type number dustbag : FC8021
- Duststorage capacity : 3 L
- Cord length : 6 m
- Fiter system : 5 Layer
Ultra Filtration System:
- Double layered compatible S-bagTM
- 2 layer permanent motor protection filter
- Super clean air exhaust filter
- Dimensions of cleaner : 252 x 299 x 457 mm
- Dimensions of packaging : 580 x 375 x 280 mm
ACCESSORIES
- Nozzle : All purpose wheeled nozzle
- Additional nozzle : Parquet nozzle
- Tubes : Metal lacquered telescopic tubes
- Accessories : Brush and crevice nozzle
- Accessory storage : Accessory clip on tube
- Coupling : Conical coupling
OPTIONAL (accessories)
- FC 8021 : S-bag Classic
- FC 8022 : S-bag Clinic
- FC 8023 : S-bag Anti-Odour
- FC 8024 : S-bag Long Performance
- FC 8032 : Super Clean Air filter,
High-Flow AFS exhaust filter

FC8600 /C
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Open the appliance, first pull off the Atilla insert, after that
screw (A) under the insert can be removed with a
screwdriver
- After removing the filtercover the second screw (B) for
releasing the backpanel can be removed.
- The dustcover, button panel, bumper and the PCB’s can
now easily be removed.
- The upperhousing (dustchamber + motorhousing) can be
released by removing 6 screws (C).
- The wires for the motor are placed under the sealing ring of
the motor.
- The sealing ring is placed in two grooves, which are made in
the lower housing.
- When you re-assemble then make sure that the wires for the
motor are placed underneath the sealing ring.
REPAIR INSTRUCTION
- Cotton dustbags, are used in countries in which paper
dustbags are not available.
- If the reel half spring unit is replaced, shaft Fmust be
lubricated with silicone grease. Do not apply any silicone
grease to or spill any grease on terminals (26) or conductors
(25).
- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn.
- Item 8, air valve, opens to cool the motor if the air
displacement is too low or if the airflow is blocked.
- When the vacuum cleaner is used to suck up fine dust the
pores of the dustbag may become clogged, causing the
passage of air through the dustbag to become obstructed.
As a result, the dustbag-full indicator will indicate that the
dustbag needs to be replaced, eventhough the dustbag is not
full at all.
ELECTRICAL DIAGRAM
MOTOR
POWER
MODULE
Black
Black/White
Brown
CORD WINDER
Blue
M
2-6

FC8600 /C
PARTS LIST
3-6
Pos Service code Description
1
2
3
4
5
6
8
9
9a
10
11
12
13
14
15
16
17
18
19
20
4341 009 00870
4322 000 38830
4322 003 26070
4322 003 25850
4322 003 26250
4322 003 26680
4322 005 18050
4322 006 23220
4341 003 02390
4322 001 73480
4322 005 18150
4322 003 25900
4322 003 25910
4322 003 25830
4322 000 09970
4322 003 26800
4322 001 73440
4322 009 09400
4322 000 38820
4322 001 73470
Dustcover assy Oxford blue
Duo filter
Inlet grille
Dustbag carrier
Back grille Oxford blue
Atilla Insert Oxford blue
DBF assy
PCB assy 220 - 240 V 50/60 Hz
Switch lever
Dustchamber seal
Back panel pr. Oxford blue
Bumper back
Buttons
Cord outlet
Button spring
Upper housing
Motor buffer front bl.
Motor kit
Silencer
Motorpot seal
Pos Service code Description
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
4322 003 26160
4322 001 72900
4322 005 17840
4322 005 18670
4322 005 17430
4322 005 17910
4322 006 02160
4322 006 02060
4341 005 01240
4341 004 20420
4341 004 20170
4322 004 23160
4822 530 10229
4322 004 91010
4322 005 18070
Lower housing Oxford blue
Buffer
Caster assy
Reel half spring unit
Reelh. cordside assy
Contact plate assy
U.K. / H.K. L = 6.3 m
Euro 4.8 mm pins L = 6.3 m
Bend handle
Hose assy extruded
Crevice nozzle 118 conical
RD 262 neutr. conical/hook
Steel tube 55 cm
Electr. filter
AFS support assy
= changed

FC8600 /C
EXPLODED VIEW
34
35
Blue
Brown
Y
X
Black
Black/White
12
11
14
15
16
13
5
9
6
8
2
3
1
10
4
C
C
C
C
C
C
B
A
9a
4-6

FC8600 /C
EXPLODED VIEW
24
23
22 (2x)
25
E
D
E
E
F
Y
Blue
Brown
Black/White
Black
X
26
19
20
21
18
17
27+28
5-6

FC8600 /C
EXPLODED VIEW
31
32
33
30
29
Korea / Europe 28
27H.K. / U.K.
6-6