Philips FC9722/09 User manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Philips Consumer Lifestyle
Vacuum cleaner
FC9722/09
FC9722/19
14/11 Version 1.4
PRODUCT INFORMATION
•This product meets the requirements regarding
interference suppression on radio and TV.
•After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
•Colour : Copper Grey
•Energy efficiency rating : A
•Input power (IEC) : 650 W
•Suction Power : 340 W
•Noise level : < 82 dBA
•Action radius : 11 mtr
•Cord length : 7 m
•Filtration : Power cylone
EPA 12 Super Clean Air
•Dimensions appliance : 505 x 292 x 292 mm
•Dimensions F-box : 650 x 330 x 310 mm
•Weight : 5.5 kg
ACCESSORIES
•Standard nozzle : Tri-Active nozzle Max
•Tubes : Metal 2-piece telescopic tube
•Accessories : Crevice tool, 2-in-1 Brush/Small
nozzle
•Accessory storage : On tubeclip
•Coupling : SmartLock
REPAIR INSTRUCTION
•No specific issues
OPTIONAL (accessories)
•FC8038 : HEPA13 washable Exhaust filter

FC9722/09 / FC9722/19
2-11
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
•To remove the Bucket, unlock the top handle by pushing
the button on the lid of Bucket (see picture).
•The button (3) on the lid is a spare part, it can be
replaced by removing screw A(see picture).
A
•The bucket can only be placed back with the lid mounted
and positioned in the correct way, otherwise the handle
cannot be closed.
•The Inlet filter assy (4) on the front (motor side) of the
Bucket can be removed by pulling the lip at the top
(see picture).
•The foam in the Inlet filter assy can be cleaned.
By pulling the plastic ring the foam lter can be removed
without touching the dirt on the lter (see picture).
•The bottom of the Bucket can be removed as shown in
the picture below.
Remark:
The Bucket can be placed back without the bottom, this
will not lead to a safety problem, but all the dust will get
into the bottom housing.

FC9722/09 / FC9722/19
3-11
•To reach the inner parts for repair, Upper housing (18)
has to be removed. First the On/Off button (17) and
Cordwinder button (16) must be removed, this can be
done with a screwdriver.
Remark:
The two buttons are secured with 4 “snap locks”, be
careful when removing (see picture).
a
bc
d
a
•When lifting at position bpush the button a little towards
the front side.
b
c
d
•When assembling, the buttons can easily be mounted by
clicking, start at the side of the handle.
Remark:
Check that the two springs are in the correct position.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC9722/09 / FC9722/19
4-11
•After removing the two buttons remove the 4 screws B
at the back and the 5 screws Cat the front of the upper
housing (see pictures).
•Screw Dat the front does not need to be removed, this
screw is for ESD and is located in the lower housing.
BB B
B
D
C
C
C
CC
•To replace the potmeter (9) situated at the bottom
of the upper housing, remove knob (7) on top of the
upperhousing and remove the 2 scews Eat the bottom
of the upper housing (see picture).
E
E
•After removing the upperhousing, Hose connection (10)
and Bucket inlet sealing (13) are accessible. To replace
the hose connection screw Fhas to be removed.
F
•To replace Cordwinder (24) or Motor (31) Motor housing
(28) has to be removed, this can be done by removing
the 4 screws G(see picture).
Remark:
A special long screw driver is needed!
H
H
G
GG
G
•To replace the PCB (9) remove the 2 short screws H.
DISASSEMBLY- AND RE-ASSEMBLY ADVISE

FC9722/09 / FC9722/19
5-11
MMotor
ACIN
ACIN
ESD
C1
0.33F
275V
C3
333
DW
½ W
5V1
D1
1N4007
D2
1N4007
R6
1M
R5
100R
SW
IC1
1
2
3
4
8
7
6
5
R8
HV R37
2M2
F
Fuse
R7
HV R37
2M2
R1
2W12k
R2
2W12k
R4
47k
R3
180k
TR
BTA16-600B
C2
470F
10V
RP
47k
ELECTRICAL DIAGRAM

FC9722/09 / FC9722/19
6-11
PARTS LIST
Pos Service code Description Remark
1
2
3
4
5
9965 100 70535
9965 100 51299
9965 100 51311
4322 005 33151
9965 100 51318
Bucket assy
Lid assy
Unlock button
Inlet lter assy
Exhaust grille assy
6
7
8
9
4322 004 93341
4322 004 93791
9965 100 51319
9965 100 51312
4322 006 25071
HEPA 13 washable lter large
Filter EPA 10
Turn knob
Decorative ring
PCBA
Cougar
Cougar ECO
10
11
12
13
14
9965 100 51305
9965 100 51306
9965 100 51324
9965 100 51308
9965 100 51323
Hose connection
Inlet sealing
Caster assy
Bucket inlet sealing
Cordwinder lever
15
16
17
18
19
9965 100 51322
9965 100 51297
9965 100 51301
9965 100 70532
9965 100 51327
Top handle assy
CW button
On/O button
Upper housing
Protection ring (on switch)
Copper Grey
20
21
22
23
24
9965 100 51321
9965 100 51325
9965 100 51326
4322 005 35391
4322 005 26072
Cord outlet assy
Handle pushing tube
Handle pushing tube spring
Safety valve assy
Cordwinder
Powerpro ECO
7 m / 4.8 / 0.75 / Cougar
25
26
27
28
4322 005 33372
9965 100 51303
9965 100 51313
9965 100 51316
9965 100 61664
Cordwinder
Lower housing
Motor housing cover
Exhaust sealing
Motor housing
7 m / Swiss plug / Cougar
29
30
31
32
33
9965 100 51304
9965 100 51317
4322 006 99431
9965 100 51296
9965 100 51315
Silencer motor housing
Motor sealing ring
761 Global 750 W AW
Motor silencer
Silencer lower housing
230 V / 50 Hz
34
35
36
37
38
9965 100 51314
9965 100 51328
9965 100 70537
4322 009 01071
4322 004 24624
Motor housing sealing
Motor buer back
Rear wheel assy
Hose curved bend assy
2 T.T. Tube
Sparkle Silver
85 cm Cobra Easyt
40
41
4322 004 24651
4322 004 25731
Accessory holder assy 3
Tri-Active nozzle Max Smart lock Deep Black

FC9722/09 / FC9722/19
7-11
A
4
5
6
3
2
1
EXPLODED VIEW

FC9722/09 / FC9722/19
8-11
C
F
C
E
E
C
G
G
D
C
C
BB
B
B
W
W
V
Z
V
Y
12
13
14
15
16
17
18
19
9
20
21
22
7
8
9
10
11
X
EXPLODED VIEW

FC9722/09 / FC9722/19
9-11
H
H
H
H
X
Y
Z
23
26
29
30
31
34
27
36
28
35
24
25
33
32
EXPLODED VIEW

FC9722/09 / FC9722/19
10-11
38
41
40
37
EXPLODED VIEW