Philips FC9061 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Vacuum cleaner
FC9061
07/05
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Colour : Deep Red
- Power consumption : 1800 W
(IEC) 230V
- Maximum Air displacement : 43 l/s
- Vacuum : 300 mbar / 30.0 kPa
- Type number dustbag : FC8021
- Duststorage capacity : 3 L
- Cord length : 7 m
- Fiter system : Double layered
compatible s-bag™
: 3 layer permanent motor
protection filter
: Super Clean Air
exhaust filter
- Dimensions of cleaner : 449 x 324 x 250 mm
- Dimensions of packaging : 593 x 393 x 296 mm
- Net weight : 5.7 kg
ACCESSORIES
- Nozzle : Tri-Active all purpose nozzle
- Tubes : Metal lacquered telescopic tubes
- Accessories : Crevice nozzle and small nozzle
- Accessory storage : Accessory clip on tube
- Coupling : Button coupling
OPTIONAL (accessories)
- FC 8021 : S-bag Classic
- FC 8022 : S-bag Clinic
- FC 8023 : S-bag Anti-Odour
- FC 8024 : S-bag Long Performance
- FC 8025 : S-fresh scent granules
- FC 8030 : Super Clean Air filter, High-Flow
AFS exhaust filter
- FC 8031 : Super Clean Air HEPA filter,
HEPA12 exhaust filter

FC9061
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- To open the apliance,
First remove the filter cover
(item 24) then remove the
vario knob button (item 11)
with a screwdriver as shown
in the picture.
- To remove the button panel (item 13), first loosen
mounting screws (A), now by using a screwdriver unlock
the 4 snap connection and separate the panel from the
housing. (see picture)
- Display cover (item 12) now can easely be removed from
the button panel.)
- To remove the motor, you need a torx screwdriver with a
14.5cm long shank. Screwdriver 9965 000 08332 can be
used.
REPAIR INSTRUCTION
- Cotton dustbags, are used in countries in which paper
dustbags are not available.
- If the reel half spring unit is replaced, shaft Gmust be
lubricated with silicone grease. Do not apply any silicone
grease to or spill any grease on terminals (39) or conductors
(38).
- Item 37 is provided with a long cord-winder spring, but
both long and short cords can be used in combination with
this spring. (L = 9.3 m)
- Depending on the original cord, the spare cord must be
shortened to the length of the original cord.
- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn
- Item 10, air valve, opens to cool the motor if the air
displacement is too low or if the airflow is blocked.
- To adjust the telescopic tube (item 46) to the required
length, push the adjustment collar in the direction of the
arrow while sliding the top section of the telescopic tube
into or out of the lower section.
- If the function of the electronic control unit (item 15) is
not required, the Triac must be short-circuited in the
manner shown in the circuit diagram.
- When the vacuum cleaner is used to suck up fine dust the
pores of the dustbag may become clogged, causing the
passage of air through the dustbag to become obstructed.
As a result, the dustbag-full indicator will indicate that the
dustbag needs to be replaced, eventhough the dustbag is not
full at all.
ELECTRICAL DIAGRAM
Triac
Short-circuit
MOTOR
POWER
MODULE
Black
Black/White
Brown
Blue
CORD WINDER
M
2-7

FC9061
PARTS LIST
3-7
Pos Service code Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
4322 005 23000
4322 003 29700
4322 000 67810
4322 003 23840
4322 000 37300
4322 003 23820
4322 003 29800
4322 003 23650
4322 000 09750
4322 005 19550
4322 003 23660
4322 005 22990
4322 003 29730
4322 003 23900
4322 006 22740
4322 003 23640
4322 003 29780
4322 003 29790
4322 003 29770
4322 003 29710
4322 005 17010
4322 005 15150
4322 003 24690
4322 003 29740
4322 004 92910
Dustcover / Pr / Deep red
Dustcover lock / Select grey
DB detector spring
DB detector
Triple inletfilter
Inlet grille
Dustchamber / Select grey
Cordwinder Knob / Select grey
Pedal spring
DBFI/Valve assy Jewel FL
Vario knob / Select grey
Display c. Transp. Colourless / Pr
Button Panel / Deep red
Adjuster
PCB assy mb turn 220-240 V
Switch knob / Select grey
Back panel / Select grey
Cord outlet / Select grey
Lowerhousing back / Select grey
Lowerhousing / Deep red
Caster assy / Select grey
Cyl. ass. fra. blck / Li. purple
Filter cover lock / Select grey
Filter cover fr. / Deep red
Electrostatic filter Phoenix
Pos Service code Description
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
4322 001 73360
4322 000 38790
4322 003 23220
4322 000 38760
4322 000 38770
4322 003 23880
4322 001 73520
4322 001 73400
4322 006 97940
4322 000 38820
4322 003 23870
4322 009 07940
4322 009 07950
4322 009 07970
4322 006 01720
4322 006 01410
4322 003 18850
4322 005 17090
4322 004 22510
4341 003 02470
4322 004 22560
4322 004 23190
4322 003 23830
4322 003 18870
4322 003 26030
4322 001 99120
4322 007 45550
4322 007 16000
Exhaust sealing
Silencer 4 wall backpanel
S-class H-sealing
Silencer 1 wall
Silencer 2 bottom
Motorhousing top inside
Buffer back green
Bufferring fr. Ans-Atlas
Motor 1761 Domel 220-240 V
Silencer 3
Motorhousing Bottom ans
Reel half spring unit (L = 9 m)
Reel half contact unit
Contact ring plate
U.K. / H.K. L = 9.3 m
Euro 4.8 mm pins L = 9.3 m
Curved bend B1
Curved bend / Hose assy
Telescopic tube stand
Accessory clip
Small Nozzle
Tri-active Nozzle stand
DB-holder
Crevice Nozzle stand
Motor Bracket
Coupling bush
Coupling spring
Leaf spring assy

FC9061
EXPLODED VIEW
2
5
6
9
8
10
7
3
4
11
12
14
48
15
16
9
13
A
BB
B
B
B
B
A
A
Y
Black/
White
Black
Z
brown
blue
1
4-7

FC9061
EXPLODED VIEW
C
C
C
C
C
C
C
C
C
D
21
20
19
18
17
28
27
26
25
24
23
22
29
30
5-7

FC9061
EXPLODED VIEW
32
35
39
36
37
38
E
F
F
F
F
E
E
G
Z
brown
blue
40 41,
34
50
Black/
White
Y
Black
31
33
6-7

FC9061
EXPLODED VIEW
47
Europe Ø 4.8mm 41
Swiss
Italy
40U.K. / H.K.
43
42
44
51
52
53
45
49
46
7-7