Philips FC9170/01 User manual

Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
ServiceManual
Vacuum cleaner
FC9170/01
FC9170/08
14/04 Version 1.2
PRODUCT INFORMATION
- This product meets the requirements regarding
interference suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
- Colour : Slate Grey
- Power consumption : 2000 W
(IEC) 230V
- Maximum Air displacement : 47 l/s
- Vacuum : 340 mbar / 34.0 kPa
- Type number dustbag : FC8021
- Duststorage capacity : 4 L
- Cord length : 9 m
- Fiter system : Classic S-Bag
long performance
: 3 layer permanent motor
protection filter
: Ultra clean air washable
HEPA13 exhaust filter
- Dimensions of cleaner : 472 x 324 x 276 mm
- Dimensions of packaging : 593 x 393 x 296 mm
- Net weight : 6.3 kg
- SAP coding : FC9170/01
ACCESSORIES
- Nozzle : Tri-Active all purpose nozzle
- Tubes : Metal lacquered 3-piece telescopic tube
- Accessories : Brush, crevice nozzle and small nozzle
- Accessory storage : Active accessory storage bridge in
handgrip
- Coupling : Button coupling
OPTIONAL (accessories)
- FC8021 : S-bag Classic
- FC8022 : S-bag Clinic
- FC8023 : S-bag Anti-Odour
- FC8031 : Super Clean Air HEPA filter,
HEPA12 exhaust filter
- FC8038 : Ultra clean air washable HEPA13
exhaust filter

FC9170/01 / FC9170/08
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Open the appliance, first remove the filter cover (item 22)
and then remove the 2 screws (A) of the button assy
(item 10).
- The button assy can be removed by lifting up the back of
the assy and then pull the assy out of the appliance.
- When the dustcover and the handle have been removed, the
electronics, DBFI valve assy, CW-lever and the switch lever
can be removed.
- The dustchamber and the backpanel can be removed from
the appliance by removing 15 screws (Band C).
- You will require a screwdriver with a 14.5 cm long shrank
for this. Screwdriver 4322 009 08490 for T15 can be used.
- When the cordwinder has been taken out, the final screw
(D) for releasing the lower front from the appliance can be
removed.
- When the repair is finished, check whether all functions of
the appliance work properly.
REPAIR INSTRUCTION
- Cotton dustbags, are used in countries in which paper
dustbags are not available.
- The cord winder spring must be tensioned to the maximum
level and then be rewound approx. 1.5 turn.
- Item 14, air valve, opens to cool the motor if the air
displacement is too low or if the airflow is blocked.
- If the function of the electronic control unit is not required,
the Triac must be short-circuited in the manner shown in
the circuit diagram.
- When the vacuum cleaner is used to suck up fine dust the
pores of the dustbag may become clogged, causing the
passage of air through the dustbag to become obstructed.
As a result, the dustbag-full indicator will indicate that the
dustbag needs to be replaced, eventhough the dustbag is not
full at all.
ELECTRICAL DIAGRAM
Triac
Ti
c
Short-circuit
ort-circu
t
S
Short-circuit
MOTOR
POWER
MODULE
Blue
Brown
CORD WINDER
Black
Black/White
M
2-8

FC9170/01 / FC9170/08
PARTS LIST
3-8
Pos Service code Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
40
41
42
42a
43
44
45
46
47
48
49
50
51
52
4322 005 24490
4322 005 17600
4322 000 67810
4322 003 24790
4322 003 24780
4322 000 37300
4322 003 33280
4322 003 24650
4322 009 09560
4322 009 09600
4322 003 24810
4322 003 27910
4322 006 22750
4322 005 20580
4341 003 02390
4322 003 24620
4322 003 24720
4322 003 24600
4322 003 27850
4322 005 17010
4322 003 24690
4322 003 20030
4322 004 93340
4322 001 74110
4322 000 38790
4322 003 25460
4322 000 38670
4322 000 38770
4322 003 23880
4322 001 73400
4322 009 09430
4322 000 38820
4322 001 73520
4322 003 23870
4322 005 34171
4322 003 18850
4322 005 12760
4322 005 23060
4322 004 23360
4322 007 16000
4322 004 23890
4322 001 99120
4322 007 31650
4322 004 22570
4322 003 18870
4322 005 12530
4322 004 22560
4341 004 20840
4322 003 26030
Dustcover / Pr / Slate Grey
Dustcover lock assy
DB detector spring
DB detector / LB / Cool grey
CCC (DB holder)
Triple inletfilter
Inlet grille / Blue
Dustchamber / Black
Handle performer / Slate Grey
Button panel assy / Pr / Slate Grey
Cord winder lever
Control wheel / Select Grey
PCB assy 220-240 V 50/60 Hz
DBFI/Valve assy / Sp.v.
Switch lever
Back panel / Black
Cord outlet / Black
Lower / LB / Back
Lower front / Slate grey
Caster assy / Select grey
Filter cover lock / Select grey
Filter cover / Slate grey
HEPA13 washable exhaust filter
Exhaust sealing / Blue
Silencer 4 wall backpanel
S-Class H-sealing
Silencer 1 wall
Silencer 2 bottom
Motorhousing top inside
Bufferring front ANS-Atlas
Motor Domel 1761 220 - 240 V
Silencer 3 compas
Motor buffer back green
Motor housing bottom ANS
Cordwinder FS SP 100 / 7.3 / 4.8 / FL
C. Bend B1
LC Swivel assy
C. Bend B1 / Hose / Swivel assy / Silver steel Nickelfree
Hose assy / Silver Steel
Leaf spring assy
3-Piece Telescopic tube assy Nickelfree
Coupling bush
Coupling spring
Plumeau assy
Crevicle nozzle
Accessory bridge assy
Small nozzle
Tri-Active nozzle, stand.
Motor bracket

FC9170/01 / FC9170/08
EXPLODED VIEW
5
8
6
7
1
2
3
4
9
10
11
12
15
14
13
A
B
B
B
B
B
B
A
YBlack/
White
Black
Z
brown
blue
4-8

FC9170/01 / FC9170/08
EXPLODED VIEW
C
C
C
C
C
C
C
C
C
D
20
19
18
17
16
26
25
24
23
22
21
27
28
5-8

FC9170/01 / FC9170/08
EXPLODED VIEW
33
52
32
34
E
F
E
E
Z
brown
blue
31
Black/
White
Y
Black
29
30
35
6-8

FC9170/01 / FC9170/08
EXPLODED VIEW
51
50
42
40 42a
4947
48
41
43
44
45
46
7-8

FC9170/01 / FC9170/08
Version history
Version 1.1 : FC9170/01 / FC9170/08 initial release.
Version 1.2 : Updated picture on front page.
In Disassembly- and re-assembly advise: Removed the description concerning disassembling the cordwinder.
In Repair Instruction: Removed the description concerning lubrication of the shaft, if the reel half spring unit is
replaced.
In Parts List and Exploded view: Deleted Pos. 35, 4322 009 09440 Reel half spring unit (L = 9 m).
In Parts List and Exploded view: Deleted Pos. 36, 4322 009 09450 Reel half contact unit.
In Parts List and Exploded view: Deleted Pos. 37, 4322 009 09460 Contact ring plate.
In Parts List and Exploded view: Deleted Pos. 38, 4322 006 07410 Cord U.K. / H.K. L = 9.3 m.
In Parts List and Exploded view: Deleted Pos. 39, 4322 006 07390 Cord Euro 4.8 mm pins L = 9.3 m.
In Parts List and Exploded view: Deleted Pos. 53, 4322 006 02140 Cord AUS / NZ L = 7.3 m.
In Parts List and Exploded view: Deleted Pos. 54, 4322 006 07400 Cord Swiss L = 9.3 m.
In Parts List and Exploded view: New Pos. 35, 4322 005 34171 Cordwinder FS SP 100 / 7.3 / 4.8 / FL.
8-8