Philips GoSure ADR800sp User manual

User Manual
Automotive Driving Recorder
GoSure
ADR800sp

contents
1. Product overview............................................................1
2. Quick start.......................................................................2
3. GoSure ADR800sp user interface....................................4
4. GoSure ADR800sp system settings.................................5
4.1 Set date and time.......................................5
4.2 Function setting..........................................6
5. Device operating instructions..........................................8
5.1 Device button icons....................................8
5.2 Recording video..........................................8
6. Additional functions..........................................................9
6.1 Driver fatigue alert.......................................9
7. Technical specification....................................................10

Product Overview / Device display1
1
1. Suction cup holder
2. Speaker
3. Lens
4. Microphone
5. Micro SD card slot
6. Power button
7. Recording indicator
8. Power indicator
9. Micro USB port
10. Reset button
11. Enter button(OK)
12. Down button
13. Up button
14. Emergency/Return button
Bracket with suction cup x 1 Charger x 1
7
8
9
10
11
1
2
3
4
5
612
13
14

Insert SD Memory Card
Insert the memory card with the golden contacts side of the card
facing the front of the LCD.
About the Micro SD card
1. Please use a Micro SD card with a capacity of at least 16GB,
Class 10 (maximum 32GB).
2. Format your Micro SD card before first use by selecting
“format SD card” in the system settings of your GoSure device.
3. The relationship between card capacity and recording time is given
below.
Quick Start2
Micro SD card
Capacity
16GB
1080P/30fps
160 minutes
320 minutes
320 minutes
640 minutes
720P/30fps
32GB
2

3
1. Install the suction cup
bracket onto the device.
2. Find a suitable position on
your windshield and lock
the suction cup.
3. Adjust the position of the
device within the mount to
ensure you’re recording
a clear view of the road.
4. Connect the USB cable to
the Micro USB socket of
the device.
5. Plug the other end of this
car charger into the socket
of your vehicle's cigarette
lighter.(running the wire
under the glove box and
around the edge of the
windshield).
6. Now your Philips GoSure will
automatically turn on when you
start your engine and will stop
recording when you turn it off
again.
Note:
1. Please use our dedicated car
charger to avoid any device
incompatibility issues.
3. To avoid damaging the video,
please unplug your car charger
before inserting or removing
your SD memory card.
4. To remove the SD card, simply
press down on the card and it
will eject from the card slot
automatically.
2. If the car power supply does not
turn off automatically, it is
recommended that you
disconnect the device’s charger
manually, to avoid draining your
car’s battery.

4
GoSure ADR800sp User interface3
1 2 3 4 5
789
10
11
No. description
1 Recording/Stop indicator
2 Recording time
6
3 Resolution indicator
4 Voice recording ON/OFF indicator
5 Motion Detection ON/OFF indicator
6 Menu indicator
7 Playback indicator
8 Recording start / stop indicator
9 Emergency indicator
10 Date/Time stamp
11 Fatigue index
02:03:01
35
2018/06/11 09:32:20

GoSure ADR800sp system settings4
Press the OK button to open the menu list, allowing you
to adjust various device settings.
4.1 Set the Date and Time
1. Press
2. Press ▲/▼ to select clock icon and then press
OK to enter date and time setting page.
3. To adjust date and time field, press ▲/▼ to select
the field.
4. Press ▲/▼ to select the value.
5. Repeat steps 3-4 to adjust other fields.
6. Press to save your changes.
OK to open the on-screen display menu.
5
Setting 2/4
Collision Detection
Language
Date/Time
LCD Auto Off
Setting
Collision Detection
Language
Date/Time
LCD Auto Off
2018 / 06 / 12
11 ： 57 ： 33
YY/MM/DD

4.2 Function settings
No. Function Menu
Icon Description
1
2
Resolution
WDR
Set the video resolution to Full HD 1080P(FHD),
HD Premium(HD+).
Switch on/off WDR function.
3Recording
Time
Voice
Recording
Set video clip time to 1 minutes, 3 minutes, 5 minutes.
4
Switch on/off voice recording function.
Date
Stamp
5Switch on/off the date and time marking on the video.
EV
6Manually adjust the exposure value.
Fatigue
Alert
7Switch on/off driver fatigue alert function.
Motion
Detection
8Select "ON" to trigger motion detection function. It will
detect moving object in the camera's field of view.When any
movement is detected, the 20 seconds recording starts
immediately.
Collision
Detection
Select the sensitivity level of collision detection to high /
middle /low /off.
Language
9
Chinese, English are available for selection.
Date/Time
10
Set date and time for the device
LCD Auto
Off
11
Set the time before the LCD is turned off automatically, or
set the LCD always on/off.
Format SD
card
12
Format your Micro SD Card.
Default
13
Reset all device settings to factory default ones.
6
14
15 About Firmware version, and other related product information.

Operating instructions5
5.1 Device button icons：
·button：Emergency button/Return button
·▲ button：Up button/Video start or Stop button
·OK button：Enter button
·▼ button：Down button/Video playback
5.2 Record video：
5.2.1 Normal video recording
With a MicroSD memory card inserted, every time you turn
on the device, it will automatically start recording. When
you switch your vehicle engine off, the camera will stop
recording automatically. The file name is the system time as
a prefix.
5.2.2 Emergency video recording
An emergency file will be automatically generated when
either you press the emergency button or the device
detects a collision above a certain force threshold.
8

Additional functions6
6.1 Driver fatigue alert
To help drivers keep track of how tired they might be,
the device comes with a fatigue alert. This takes into
account both physiological and journey related
parameters; for example, it considers the time of day
and the time spent on driving. Furthermore, the device
will alert you every two hours of driving, to remind you
that fatigue could become an issue.
Besides this alert, there is also a fatigue indicator on the
device’s display.With a fatigue rating below 60, the
indicator is green. When the fatigue rating is between 60
and 80, the indicator is yellow and a warning alert sounds.
When the fatigue rating reaches 80, the indicator turns red
and three warning beeps sound.
When you switch on this driver fatigue feature, it’s
important that you set correct system time (so it knows at
what time of day you’re driving). If you have this feature
switched off, the fatigue rating will not be displayed on the
screen.
9