PhysioRoom.com V1008S User manual

V1008S Three Function High Power Vibration Plate
Plus 1000W 18 levels of Adjustable Vibration

Contents
Instructions for Use
Intended Use
Health & Safety Warnings
Before Use
Instructions for Assembly
Accessories
Steps to Assemble
Assembly Instructions
Control Centre
Error Messages
Parameters
Maintenance
Troubleshooting

–V1008S ThreeInstructions for Use
Function High Power Vibration Plate Plus 1000W 18
levels of Adjustable Vibration
Vibrations plates use the power of motion to stimulate a
person’s muscles. As well as working the body to develop
strength, resistance and muscle definition this machine can
also be used to boost blood circulation. Increased blood flow
has many benefits on the body. By increasing the flow of
oxygen, performance is enhanced, the build-up of lactic acid
is reduced and pain/tension is eased.
Intended Use
Use to work the whole body or to target specific muscle
groups and areas. The pulsing motion of the vibration plate is
designed to aid weight loss, define muscles, increase
strength, improve circulation of the blood, reduce the
appearance of cellulite and support rehab training.
Ideal for those both new to exercise and active fitness
enthusiasts. For best results use the High Power Vibration
Plate Plus for 10-15 minutes after waking or before sleeping.
Remember to drink plenty of water.

Health & Safety Warnings
Use this product no more than three times a day. Each
session should not exceed 15 minutes.
Stop using the High Power Vibration Plate Plus immediately if
any problems occur with it.
Use of this machine less than an hour after eating is not
recommended.
Do not move this machine while it is running.
High Power Vibration Plate Plus cannot be used by pregnant
women.
Patients with heart disease, diabetes or cancer should
consult their doctor before using this machine.

Before Use
Ensure the High Power Vibration Plate Plus is placed on a flat
surface.
Make sure your voltage and electric current are within the
parameters of this machine.
The High Power Vibration Plate Plus contains no transformer.
The socket should sustain 5A current voltage, have a ground
wire and not be shared with other electrical appliances.
This machine is not to be operated by children without
guidance of an adult.
Keep this machine out of contact with water.
Cut off the power to this machine after each use.

–V1008SInstructions for Assembly
Three Function High Power Vibration Plate Plus 1000W
18 levels of Adjustable Vibration

Accessories
Steps to Assemble

Assembly Instructions
1. Attach the signal cable to the pedestal.
2. Put the stand pipe into the pedestal.
3. Use the 6 M8x25 screws and the gaskets to fix the stand
pipe to the pedestal at the bottom of the machine.
4. Place the armrest onto the stand pipe.
5. Next, fix it with the 4 M6x20 screws and the gaskets.
YOUR MACHINE IS NOW READY!

Control Centre
1. Time/Wobble Speed
Display Shift Button
7. Time/Wobble Speed Display
2. Speed Display
3. Speed Increase Button for
Vibration
4. Time Button
5. Speed Decrease Button for
Vibration
8. Speed Increase Button for
Wobble
9. Speed Decrease Button for
Wobble
10. Mode Button
11. ON/OFF Button
6. Mode Display

1. Time/Wobble Speed Display Shift Button
While the vibration machine is in use, this button allows you
to switch between the time and speed display mode or the
vibration settings and vibration speed display - shown on the
screen below this button.
2. Speed Display
Displays the speed setting during operation of machine.
Time-speed mode alternates between displays for:
Wobble speed (Hxx) Vibration speed (Lxx)
Alternatively, Dual-speed mode shows you the speed of the
vibration (Lxx). Both speed modes can be manually increased
or decreased at 0-50 grades.
3. Speed Increase Button for Vibration
Press to increase the vibration grade of the machine in
manual mode and also the duration of operation time in
time-adjustment mode.
4. Time Button
While the machine is in shutdown in manual mode and this
button is pressed the time indicator flashes and starts up
time-adjustment mode. You can now increase or decrease
the duration of machine operations with this button.