GemLightbox Turntable
Power
Button
Setting Up
2
GemLightbox Turntable
To switch on the turntable, click the small black button as
indicated on the image. When switched on, the LED tube
on the rear of the turntable will light up.
It is safe to leave your turntable on and plugged into
your GemLightbox unit. Simply power off the entire
GemLightbox unit after each photography session.
1 Set up the
GemLightbox Turntable
Place the turntable inside the GemLightbox, with the at
side aligned with the back wall. Connect the turntable to
the GemLightbox using the supplied power cord.
Open the GemLightbox Application and connect the
turntable via bluetooth.
The GemLightbox turntable is designed for full
compatibility and function with the GemLightbox
Application. The GemLightbox Application allows you to
control the turntable with options to capture 360, 90 or
45 degrees at a fast or slow speed.
3Connect the GemLightbox
Turntable via bluetooth
7GEMLIGHTBOX USER MANUAL | INTRODUCTION
SUPPORT.PICUPMEDIA.COM
