
Scope of delivery
please check for completeness
1 Hammock Oyster
2 spreader bars, stainless steel
1 utensil bag
2 suspension ropes each 2 m
2 safety shackles, stainless steel (tied in)
1 large pillow, high quality lling
Description:
The OYSTER has been designed extra luxuriously: large, comfortable, stable, comfortable, aesthetic,
high-quality workmanship, for 2 persons or alone, ergonomic, weatherproof, with a huge cushion, prac-
tical utensil bag. For the perfect lying comfort in a hammock with spreader bars and 2-point suspension,
the lying surface is made of 5 double-layered longitudinal strips, with padding. This stabilises the width
and allows two people to lie in it. The huge cushion with high-quality, weatherproof lling is cuddly and
comfortable at the same time. The utensil pocket for books, tablets, glasses, etc., which is attached to
the head-side spreader bar, is practical and easily accessible. Safety shackles made of stainless steel are
attached at both ends for suspension.
Technical data that convince:
weatherproof hammock with 2 spreader bars
lying surface 125 cm x 215 cm, made of 5 sheets
Clamping length from 260 cm
double layer, padded, spacer fabric
Own weight approx. 10 kg
Resting load 250 kg
Not included:
Appropriate ropes are required for suspension
over longer distances.
High quality ropes, weatherproof, seawater resis-
tant, with 1,000 kg breaking load, can be ordered
from us.
Product characteristics:
very stable, does not tilt, much lying comfort
ergonomic reclining quality
skin-friendly, breathable mesh fabric
is pleasantly airy in strong sunlight
insensitive to sun/UV, rain, sea water
easy-care, robust, durable
1. Inserting the utensil bag.
The practical bag has a sewn „tunnel channel“.
One of the spreader bars can be pushed through
this channel before being inserted into the two
retaining thimbles. We have dened the area with
the sewn-on Crazy Chair label as the hammock
headboard. There should be the spreader bar
with the utensil bag.
2. Insert spreader bars.
The two spreader bars are inserted at each end of
the hammock. Before the spreader bars are put
into the black „thimbles“ for the rst time, you
should shape them with your ngers a little bit as
a „trough“ so that the bar ends can be put in more
easily and get a good grip.