2. Rear wheel assembly
a. First, check whether the rear axle is in the middle of the car,
make sure the axle length that extend out on both sides are same.
b. Aim the center of the rear wheel (with bulge plastic part) to rear
axle and rear motor, press the button on the middle of the wheel,
then insert and push the wheel into place.
C. Turn over the car body, make sure that the assembled wheel is
contacted with the ground, then assemble the other wheel.(If the
other wheel can’t assemble well, please pull out the rear axle until
it can’t move, try to assemble again.)
Assembly instruction
Car assembling should be done by the adults.
Take care of small parts. To avoid choking hazard, keep
children away while assembling. Children under 36 months
are prohibited to use.
Please count all the parts carefully before assembling and
dispose the plastic bag properly. To avoid choking hazard,
children are not allowed to play with the bag.
Front wheel
1. Front wheel assembly
Turn over the car body, aim the center of the front wheel (no
bulge plastic part) to front axle, press the button on the middle
of the wheel, then insert and push the wheel into place.
