Pioneer Super Tuner IIID AVIC-F700BT User manual
ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2008
AVIC-F700BT/XS/UC
CRT4157
FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER
AVIC-F700BT
/XS/UC
AVIC-F7010BT
/XS/UC
NAVIGATION AV SYSTEM
AVIC-F700BT
/XS/EW5
This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks
CX-3195 CRT3815 S10.5COMP2 CD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
For details, refer to "Important Check Points for Good Servicing".
K-ZZZ.-002 MAY 2008 Printed in Japan
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC
2
1234
1234
C
D
F
A
B
E
SAFETY INFORMATION
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
-Safety Precautions for those who Service this Unit.
When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.
Caution:
1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.
2. During repair or tests, do not view laser beam for 10 seconds or longer.
CAUTION
WARNING
Where in a manufacturer’s service documentation, for example in circuit diagrams or lists
of components, a symbol is used to indicate that a specific component shall be replaced only
by the component specified in that documentation for safety reasons, the following symbol shall
be used:
The backlighting lamp of LCD in this equipment contains mercury. Disposal of this material may be
regulated due to environmental considerations according to Local, State or Federal Laws. For disposal
or recycling information, please contact your local authorities or the Electronics Industries
Alliance: www.eiae.org
This product contains mercury. Disposal of this material may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local authorities or the Electronics Industries
Alliance: www.eiae.org.
This product contains certain electrical parts contain chemicals which are known to the State of
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC 3
5678
5678
C
D
F
A
B
E
WARNING!
The AEL (accessible emission level )of the laser power output is less than CLASS 1
but the laser component is capable of emitting radiation exceeding the limit for
CLASS 1.
A specially instructed person should do servicing operation of the apparatus.
Laser diode characteristics
Wave length : 785 nm to 814 nm
Maximum output : 1 190 W(Emitting period : unlimited)
Additional Laser Caution
Transistors Q101 in PCB drive the laser diodes.
When Q101 is shorted between their terminals, the laser diodes will radiate beam.
If the top cover is removed with no disc loaded while such short-circuit is continued,
the naked eyes may be exposed to the laser beam.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC
4
1234
1234
C
D
F
A
B
E
[Important Check Points for Good Servicing]
In this manual, procedures that must be performed during repairs are marked with the below symbol.
Please be sure to confirm and follow these procedures.
1. Product safety
Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by
following the safety instructions described in this manual.
1Use specified parts for repair.
Use genuine parts. Be sure to use important parts for safety.
2Do not perform modifications without proper instructions.
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
3Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
4Make sure the screws are tightly fastened.
Please be sure that all screws are fastened, and that there are no loose screws.
5Make sure each connectors are correctly inserted.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs.
In addition, be sure that there are no pinched wires, etc.
7Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
9There should be no spark traces or similar marks on the power plug.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
aSafe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
3. Lubricants, Glues, and Replacement parts
Use grease and adhesives that are equal to the specified substance.
Make sure the proper amount is applied.
5. Shipping mode and Shipping screws
To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be
installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC 5
5678
5678
C
D
F
A
B
E
CONTENTS
SAFETY INFORMATION .....................................................................................................................................2
1. SERVICE PRECAUTIONS................................................................................................................................6
1.1 SERVICE PRECAUTIONS.........................................................................................................................6
1.2 NOTES ON SOLDERING...........................................................................................................................7
2. SPECIFICATIONS.............................................................................................................................................8
2.1 SPECIFICATIONS......................................................................................................................................8
2.2 DISC/CONTENT FORMAT....................................................................................................................... 11
2.3 PANEL FACILITIES ..................................................................................................................................12
2.4 CONNECTION DIAGRAM........................................................................................................................15
3. BASIC ITEMS FOR SERVICE ........................................................................................................................17
3.1 CHECK POINTS AFTER SERVICING .....................................................................................................17
3.2 PCB LOCATIONS.....................................................................................................................................18
3.3 JIGS LIST .................................................................................................................................................19
3.4 CLEANING ...............................................................................................................................................20
4. BLOCK DIAGRAM ..........................................................................................................................................22
4.1 OVERALL CONNECTION DIAGRAM ......................................................................................................22
4.2 BLOCK DIAGRAM....................................................................................................................................24
4.3 POWER SUPPLY SYSTEM FIGURE.......................................................................................................32
5. DIAGNOSIS ....................................................................................................................................................36
5.1 OPERATIONAL FLOWCHART.................................................................................................................36
5.2 ERROR CODE LIST.................................................................................................................................38
5.3 CONNECTOR FUNCTION DESCRIPTION .............................................................................................39
5.4 TROUBLESHOOTING..............................................................................................................................40
6. SERVICE MODE.............................................................................................................................................44
6.1 TEST MODE.............................................................................................................................................44
6.2 CD TEST MODE.......................................................................................................................................56
6.3 uBOOT MENU..........................................................................................................................................59
6.4 USING THE TEST DISC ..........................................................................................................................60
7. DISASSEMBLY ...............................................................................................................................................66
8. EACH SETTING AND ADJUSTMENT............................................................................................................75
8.1 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT ....................................................75
8.2 AV UNIT ADJUSTMENT...........................................................................................................................77
8.3 FLICKER ADJUSTMENT .........................................................................................................................79
9. EXPLODED VIEWS AND PARTS LIST ..........................................................................................................80
9.1 PACKING..................................................................................................................................................80
9.2 EXTERIOR(1)...........................................................................................................................................84
9.3 EXTERIOR(2)...........................................................................................................................................86
9.4 EXTERIOR(3)...........................................................................................................................................88
9.5 CD MECHANISM MODULE .....................................................................................................................90
10. SCHEMATIC DIAGRAM................................................................................................................................92
10.1 AV UNIT(PS/IF SECTION)(GUIDE PAGE).............................................................................................92
10.2 AV UNIT(A/V SECTION)(GUIDE PAGE) ................................................................................................98
10.3 AV UNIT(TUNER SECTION)................................................................................................................104
10.4 AV UNIT(SYSTEM uCOM SECTION)(GUIDE PAGE)..........................................................................106
10.5 AV UNIT(RGB LED DRIVER SECTION) .............................................................................................. 112
10.6 AV UNIT(IF SECTION)(GUIDE PAGE).................................................................................................114
10.7 KEYBOARD UNIT ................................................................................................................................120
10.8 CD MECHANISM MODULE(GUIDE PAGE).........................................................................................122
10.9 WAVEFORMS.......................................................................................................................................128
11. PCB CONNECTION DIAGRAM ..................................................................................................................130
11.1 AV UNIT ................................................................................................................................................130
11.2 KEYBOARD UNIT.................................................................................................................................134
11.3 CD CORE UNIT(S10.5COMP2) ...........................................................................................................136
12. ELECTRICAL PARTS LIST.........................................................................................................................138
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC
6
1234
1234
C
D
F
A
B
E
1. SERVICE PRECAUTIONS
1.1 SERVICE PRECAUTIONS
1. You should conform to the regulations governing the product (safety, radio and noise, and other regulations),
and should keep the safety during servicing by following the safety instructions described in this manual.
2. Be careful in handling ICs. Some ICs such as MOS type are so fragile that they can be damaged by electrostatic
induction.
3. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY".
4. After replacing the pickup unit, be sure to check the grating.
EJECT LOCK MODE for CD mechanism
In order to change the EJECT LOCK/UNLOCK status of the mechanism, please perform following procedure.
< Procedure >
Top Menu -> AV Source -> Source OFF
Short push area "A" -> Short push area "B" -> Long push area "C" on above screen.
(In order to change the status, follow the same operation.)
The current status can be confirmed by "OFF" character color.
AB
C
Eject Lock: ON
Eject Lock: OFF
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Pioneer Corporation is under license.
Other trademarks and trade names are those of their respective owners.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC 7
5678
5678
C
D
F
A
B
E
1.2 NOTES ON SOLDERING
For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit.
Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs
accompanied by reworking of soldering.
Compared with conventional eutectic solders, lead-free solders have higher melting points, by approximately 40 C.
Therefore, for lead-free soldering, the tip temperature of a soldering iron must be set to around 373 C in general, although
the temperature depends on the heat capacity of the PC board on which reworking is required and the weight of the tip of
the soldering iron.
Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting
temperatures (hard to melt/easy to harden).
The following lead-free solders are available as service parts:
Parts numbers of lead-free solder:
GYP1006 1.0 in dia.
GYP1007 0.6 in dia.
GYP1008 0.3 in dia.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC 17
5678
5678
C
D
F
A
B
E
3. BASIC ITEMS FOR SERVICE
3.1 CHECK POINTS AFTER SERVICING
To keep the product quality after servicing, please confirm following check points.
demrifnocebotmetIserudecorP.oN
1 Confirm whether the customer complain has
been solved.
If the customer complain occurs with the
specific media, use it for the operation check.
The customer complain must not be
reappeared.
Display, video, audio and operations must be
normal.
2 CD Play back a CD.
(Track search)
Display, audio and operations must be
normal.
3 FM/AM tuner Check FM/AM tuner action.
(Seek, Preset)
Switch band to check both FM and AM.
Display, audio and operations must be
normal.
4 GPS positioning Connect GPS antenna to the product, and
check whether the current location is correct.
Current location must be correct.
Display and operations must be normal.
5 Map display
Touch-panel
operation
Remote-control
operation
Check functions of map scale change and
map scroll.
Display and operations must be normal.
6 data added during the operating
check.
Check whether no media (CD etc.) is inside
the product.
Make sure to delete data added during the
operating check.
The media used for the operating check must
be ejected.
retfaecnaraeppastinotridrosehctarcsoNkceh
cecnaraeppA7
receiving it for service.
See the table below for the items to be checked regarding video and audio:
Item to be checked regarding video Item to be checked regarding audio
noi
trotsiDesion-kcolB
esioNesionlatnoziroH
wolootemuloVesiontoD
Disturbed image (video jumpiness) Volume too high
gnitautculfemuloVkradooT
detpurretnidnuoSthgirbooT
Mottled color
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC
18
1234
1234
C
D
F
A
B
E
3.2 PCB LOCATIONS
CCD Core Unit(S10.5COMP2)
B
AV Unit
A
Keyboard Unit
Unit Number : CWN3170(UC)
Unit Number : CWN3168(EW5)
Unit Name : AV Unit
Unit Number :
Unit Name : Keyboard Unit
Unit Number : CWX3514
Unit Name : CD Core Unit(S10.5COMP2)
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC 19
5678
5678
C
D
F
A
B
E
3.3 JIGS LIST
15P FFC GGD1123 Navi Unit <---> SD Unit
74P FFC GGD1560 Navi Unit <---> Panel Unit
50P FFC GGD1250 Navi Unit <---> AV Unit
20P Extension Cable GGD1327 Navi Unit <---> AV Unit
TORX screwdriver GGK1068 T8 (For top cover)
15P BBR GGD1561 AV Unit <---> CD Mechanism Module
Test Disc TCD-782 Checking the grating
L.P.F. Checking the grating (Two pieces)
Service Data Disc GGV1322 for Test Mode, Test Disc
-Grease List
Name
Grease
Grease
Grease No.
GEM1024
GEM1045
Remarks
CD Mechanism Module
CD Mechanism Module
GGD1327
Navi Unit
GGD1250
GGD1560
CD Mechanism Module
Panel Unit
GGD1561
AV Unit
-Jigs List
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
AVIC-F700BT/XS/UC
20
1234
1234
C
D
F
A
B
E
3.4 CLEANING
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
Portions to be cleaned Cleaning tools
Fans Cleaning paper : GED-008
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
Other manuals for Super Tuner IIID AVIC-F700BT
4
This manual suits for next models
1
Table of contents
Other Pioneer Car Navigation System manuals
Pioneer
Pioneer CNDV-21 User manual
Pioneer
Pioneer AVIC-N3 User manual
Pioneer
Pioneer AVIC-D1 User manual
Pioneer
Pioneer AVIC-HD3 User manual
Pioneer
Pioneer AVIC-F710BT User manual
Pioneer
Pioneer AVIC-Z120BT User manual
Pioneer
Pioneer AVIC-F70BT User manual
Pioneer
Pioneer AVIC-F220 Operating manual
Pioneer
Pioneer AVIC-F60BT User manual
Pioneer
Pioneer AVIC-880DVD User manual
Pioneer
Pioneer AVIC-X1BT User manual
Pioneer
Pioneer AVIC-D3 - Navigation System With DVD Player User manual
Pioneer
Pioneer AVIC Z3 - Navigation System With DVD player User manual
Pioneer
Pioneer AVIC-Z830DAB User manual
Pioneer
Pioneer AVIC U310BT - Navigation System With CD... User manual
Pioneer
Pioneer AVIC N2 - Navigation System With DVD player User manual
Pioneer
Pioneer AVIC-Z140BH User manual
Pioneer
Pioneer AVIC-F88DAB User manual
Pioneer
Pioneer AVIC-Z820DAB User manual
Pioneer
Pioneer AVIC-Z1000DAB User manual
Popular Car Navigation System manuals by other brands
Sanyo
Sanyo NVM-4030 - Easy Street - Automotive GPS... instruction manual
Furuno
Furuno ENVISION AR-100M Operator's manual
Logic IO
Logic IO PNM-200 Technical manual
Intellinav
Intellinav UM_IN-KIG02-112706.QXD user manual
Rostra
Rostra 250-7614 2011-2013 Ford Edge installation instructions
Sony
Sony NV-U83T Firmware version 3.02 Before you use
