Pioneer KEH-P7025 User manual

English Español
Português (B)
Multi-CD control High power cassette player with
FM/AM tuner
Operation Manual
KEH-P7025

Before You Start
About this manual 5
Precautions 5
Use and care of the remote control 5
• Installing the battery 5
• Using the remote control 6
Protecting your unit from theft 6
• Removing the front panel 6
• Attaching the front panel 6
About the demo mode 7
• Reverse mode 7
• Feature demo 7
What’s what 8
• Head Unit 8
• Remote control 9
Power ON/OFF
Turning the unit on 10
Selecting a source 10
Turning the unit off 10
Tuner
Listening to the radio 11
Introduction of advanced tuner
operation 12
Storing and recalling broadcast
frequencies 12
Tuning in strong signals 13
Storing the strongest broadcast
frequencies 13
Cassette Player
Playing a tape 14
Introduction of advanced cassette player
operation 15
Repeating play 15
Skipping blank tape sections 15
Radio intercept 15
Using Dolby noise reduction 16
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to oper-
ate your model properly. After you have finished reading the instructions, put them
away in a safe place for future reference.
Contents
En
2
00
Section

Multi-CD Player
Playing a CD 16
50-disc multi-CD player 17
Introduction of advanced multi-CD player
operation 17
Repeating play 18
Playing tracks in a random order 18
Scanning CDs and tracks 18
Pausing CD playback 19
Using ITS playlists 19
• Creating a playlist with ITS
programming 19
• Playback from your ITS playlist 20
• Erasing a track from your ITS
playlist 20
• Erasing a CD from your ITS playlist 20
Using disc title functions 21
• Entering disc titles 21
• Displaying disc titles 22
• Selecting discs from the disc
title list 22
Using CD TEXT functions 22
• Displaying titles on CD TEXT discs 22
• Scrolling titles in the display 22
Using compression and bass emphasis 23
AudioAdjustments
Introduction of audio adjustments 23
Setting the sound focus equalizer 24
Using balance adjustment 24
Using the equalizer 25
• Recalling equalizer curves 25
• Adjusting equalizer curves 25
• Fine adjusting equalizer curve 26
Adjusting bass 26
Adjusting treble 26
Adjusting loudness 27
Using subwoofer output 27
• Adjusting subwoofer settings 27
Using non fading output 28
• Adjusting non fading output level 28
Using the high pass filter 28
Adjusting source levels 29
Automatic sound levelizer function 29
Initial Settings
Adjusting initial settings 30
Setting the time 30
Setting the FM tuning step 30
Setting the AM tuning step 31
Switching the warning tone 31
Switching the auxiliary setting 31
Switching the dimmer setting 31
Selecting the brightness 32
Setting the rear output and
subwoofer controller 32
Switching the Telephone
Muting/Attenuation 33
Contents
En 3
English Español Deutsch Français Italiano Nederlands
00
Section

Other Functions
Setting the time display on or off 33
Using different entertainment displays 33
Using the AUX source 33
• Selecting AUX as the source 34
• Setting the AUX title 34
Using the telephone muting/attenuation
function 34
Introduction of DAB operation 35
• Operation 35
• Changing the Label 35
• Operating Announcements with the
Function Menu 36
• Available PTY Function 36
• Searching the PTY 36
• Using dynamic label 36
• Displaying dynamic label 36
• Storing and recalling
dynamic label 37
Additional Information
Cassette tapes 37
Cleaning the playback head 37
Music search and repeat functions 37
Specifications 38
Contents
En
4
00
Section

En 5
English Español Deutsch Français Italiano Nederlands
01
Section
Before You Start
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and oper-
ation. All the functions have been designed for
the easiest possible use, but many are not self-
explanatory. This operation manual will help you
benefit fully from this product’s potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin using
this unit. It is especially important that you read
and observe precautions on this page and in
other sections.
This manual explains head unit operation. You
can perform the same operations with the
remote control.
Precautions
• Keep this manual handy as a reference for
operating procedures and precautions.
• Always keep the volume low enough so you
can hear sounds outside of the car.
• Protect this product from moisture.
• If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
• If this unit does not operate properly, contact
your dealer or nearest authorized Pioneer
Service Station.
Use and care of the remote con-
trol
Installing the battery
Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus (–) poles pointing in the proper direc-
tion.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not
to be used for a month or longer.
• Do not recharge, disassemble, heat or dis-
pose of battery in fire.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materi-
als.
• In the event of battery leakage, wipe the
remote control completely clean and install a
new battery.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public institution’s rules that
apply in your country/area.

En
6
01
Section
Before You Start
Using the remote control
Point the remote control in the direction of the
front panel to operate.
Important
• Do not store the remote control in high tem-
peratures or direct sunlight.
• The remote control may not function properly
in direct sunlight.
• Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedals.
Protecting your unit from theft
The front panel can be detached from the head
unit and stored in the protective case provided
to discourage theft.
• If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
• You can turn off the warning tone. See
Switching the warning tone on page 31.
Important
• Never use force or grip the display and the
buttons tightly when removing or attaching.
• Avoid subjecting the front panel to excessive
shocks.
• Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and pull
it gently outward.
Take care not to grip it tightly or drop it.
3 Put the front panel into the protective case
provided for safe keeping.
Attaching the front panel
Replace the front panel by holding it upright
to this unit and clipping it securely into the
mounting hooks.

Before You Start
En 7
English Español Deutsch Français Italiano Nederlands
01
Section
About the demo mode
This product features two demonstration
modes. one is the reverse mode, the other is the
feature demo mode.
Reverse mode
If you do not perform an operation within about
30 seconds, screen indications start to reverse,
and then continue reversing every 10 seconds.
Pressing 5 numbered button when power to this
product is switched off while the ignition switch
is set to ACC or ON cancels the reverse mode.
Pressing 5 numbered button again to start the
reverse mode.
Feature demo
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON. Pressing 6
numbered button during feature demo opera-
tion cancels the feature demo mode. Pressing 6
numbered button again to start the feature
mode. remember that if the feature demo con-
tinues operating when the car engine is
switched off, it may drain battery power.
Notes
• You cannot cancel a demo mode when the
front panel is open.
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.

What’s what
Head Unit
1ENTERTAINMENT button
Press to change to the entertainment dis-
play.
2VOLUME
When you press the VOLUME, it extends
outward so that it becomes easier to turn.
To retract the VOLUME, press it again.
Rotate to increase or decrease the volume.
3CLOCK button
Press to change to the clock display.
4DISPLAY button
Press to select different displays.
5ATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
6FUNCTION button
Press to select functions.
7OPEN button
Press to open the front panel.
8AUDIO button
Press to select various sound quality con-
trols.
95/∞/2/3buttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls. Also
used for controlling functions.
0SFEQ button
Press to select a natural sound with pres-
ence.
-BAND/ESC button
Press to select among three FM and one AM
bands and cancel the control mode of func-
tions.
=1–6 (PRESET TUNING) buttons
Press for preset tuning and disc number
search when using a multi-CD player.
Before You Start
En
8
01
Section
SELECT
35
!~
9
8
7
0
1246
-=

En 9
English Español Deutsch Français Italiano Nederlands
01
Section
Before You Start
~SOURCE button
This unit is switched on by selecting a
source. Press to cycle through all of the
available sources.
!EQ button
Press to select various equalizer curves.
Remote control
The supplied remote control enables convenient
remote operation of the head unit. Operation is
the same as when using button on the head
unit.
@VOLUME button
Press to increase or decrease the volume.
#CD button
Press to select the built-in or multi-CD player
as source.
$CASSETTE button
Press to select the cassette as source.
%TUNER button
Press to select the tuner as source.
8
6
%
#
$
-5
9
@

En
10
02
Section
Power ON/OFF
Turning the unit on
Press SOURCE to turn the unit on.
When you select a source the unit is turned on.
Selecting a source
You can select a source you want to listen to. To
switch to the Cassette player, load a cassette in
this unit (refer to page 14).
• When using the head unit, press SOURCE to
select a source.
Press SOURCE repeatedly to switch between
the following sources:
CD player (one disc only)—TV—Tuner—DAB
(Digital Audio Broadcasting)—Cassette player—
Multi-CD player—External unit 1—External unit 2
—AUX
• When using the remote control, press
TUNER, CASSETTE or CD to select a source.
Press each button repeatedly to switch between
the following sources:
TUNER: TV—Tuner—DAB (Digital Audio
Broadcasting)—Sources off
CASSETTE: Cassette player—Sources off
CD: CD player (one disc only)—Multi-CD
player—Sources off
Notes
• In the following cases, the sound source will
not change:
— When a product corresponding to each
source is not connected to this unit.
— When no cassette is set in this unit.
— When no magazine is set in the multi-CD
player.
— When the AUX (auxiliary input) is set to off
(refer to page 31).
• External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
• When this unit’s blue/white lead is connected
to the car’s auto-antenna relay control termi-
nal, the car’s antenna extends when this
unit’s source is switched on. To retract the
antenna, switch the source off.
Turning the unit off
Press SOURCE and hold for at least one sec-
ond to turn the unit off.

En 11
English Español Deutsch Français Italiano Nederlands
03
Section
Tuner
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 12.
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 31).
1STEREO (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2BAND indicator
Shows which band the radio is tuned to, AM
or FM.
3PRESET NUMBER indicator
Shows what preset has been selected.
4FREQUENCY indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND/ESC to select a band.
Press BAND/ESC until the desired band is dis-
played, FM1, FM2, FM3 for FM or AM.
4 To perform manual tuning, press 2or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2or 3with a quick press.
• If you press and hold 2or 3you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the STEREO (ST )indicator will
light.
123
4

En
12
03
Section
Tuner
Introduction of advanced tuner
operation
1FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
BSM (best stations memory)—LOCAL (local
seek tuning)
• To return to the frequency display, press
BAND/ESC.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
Storing and recalling broadcast
frequencies
If you press any of the PRESET TUNING buttons
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a PRESET TUNING but-
ton and hold until the preset number stops
flashing.
The number you have pressed will flash in the
PRESET NUMBER indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same PRESET TUN-
ING button the radio station frequency is
recalled from memory.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
• You can also use 5and ∞to recall radio sta-
tion frequencies assigned to PRESET TUNING
buttons.
1

En 13
English Español Deutsch Français Italiano Nederlands
03
Section
Tuner
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press FUNCTION to select LOCAL.
Press FUNCTION until Local appears in the
display.
2 Press 5to turn local seek tuning on.
Local seek sensitivity (e.g., Local 2) appears in
the display.
3 Press 2or 3to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: Local 1—Local 2—Local 3—Local 4
AM: Local 1—Local 2
The Local 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
4 When you want to return to normal seek
tuning, press ∞to turn local seek tuning off.
Local :OFF appears in the display.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under PRESET TUNING buttons 1–6 and
once stored there you can tune in to those fre-
quencies with the touch of a button.
1 Press FUNCTION to select BSM.
Press FUNCTION until BSM appears in the dis-
play.
2 Press 5to turn BSM on.
BSM begins to flash. While BSM is flashing the
six strongest broadcast frequencies will be
stored under PRESET TUNING buttons in order
of their signal strength. When finished, BSM
stops flashing.
• To cancel the storage process, press ∞.
Note
• Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using PRESET TUNING.

En
14
04
Section
Cassette Player
Playing a tape
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on page 15.
1PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent side of the tape.
2TAPE DIRECTION indicator
Shows the direction of the tape transport.
1 Press OPEN to open the front panel.
Cassette loading slot appears.
• After inserting a cassette tape, press SOURCE
to select the cassette player.
2 Insert a cassette tape into the cassette
loading slot.
Playback will automatically start.
Cassette loading slot
EJECT button
• You can eject a cassette tape by pressing
EJECT.
• When a metal or chrome tape is inserted
Metal is lit on the display. Nothing is displayed
for a normal tape.
• To avoid a malfunction, make sure that no
metal object comes into contact with the front
panel is open.
3 After a cassette tape has been inserted,
close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or rewind, press 2
or 3.
FF or REW appears in the display.
• To cancel fast forward or rewind and return to
playback, press BAND/ESC.
• You can cancel fast forward or rewind by
pressing 2or 3in the same direction twice.
6 To perform forward or rewind music
search, press 2or 3twice.
F-MS (forward music search) or R-MS (rewind
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
• To cancel music search and return to play-
back, press BAND/ESC.
• You can cancel music search by pressing 2
or 3in the same direction again.
7 To change the direction of the tape trans-
port, press BAND/ESC.
Notes
• Do not insert anything other than a cassette
tape into the cassette loading slot.
•PLAY TIME indicator starts from 00min00sec
in the following cases:
— When a tape is inserted
— When the tape direction is changed
— When you rewind the tape to the beginning
•PLAY TIME indicator is halted when fast for-
ward, rewind or music search is operating.
21

En 15
English Español Deutsch Français Italiano Nederlands
04
Section
Cassette Player
Introduction of advanced
cassette player operation
1FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
RPT (repeat play)—B.S (blank skip)—R.INT
(radio intercept)—B NR (Dolby B NR)
• To return to the playback display, press
BAND/ESC.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select RPT.
Press FUNCTION until Repeat appears in the
display.
2 Press 5to turn repeat play on.
Repeat :ON appears in the display. The track
presently playing will play and then repeat.
3 Press ∞to turn repeat play off.
Repeat :OFF appears in the display. The track
presently playing will continue to play and then
play the next track.
Skipping blank tape sections
Blank skip automatically fast forwards to the
next song if there is a long period of silence (12
seconds or longer) between songs.
1 Press FUNCTION to select B.S.
Press FUNCTION until Blank Skip appears in
the display.
2 Press 5to turn blank skip on.
Blank Skip :ON appears in the display. Long
periods of silence between songs will be
skipped.
3 Press ∞to turn blank skip off.
Blank Skip :OFF appears in the display. The
complete cassette tape will play.
Radio intercept
This function allows you to listen to the radio
during tape fast-forwarding/rewinding.
1 Press FUNCTION to select R.INT.
Press FUNCTION until Radio Int. appears in the
display.
2 Press 5to turn radio intercept on.
Radio Int. :ON appears in the display.
3 Press ∞to turn radio intercept off.
Radio Int. :OFF appears in the display.
1

Multi-CD Player
En
16
04
Section
Cassette Player
Note
• The radio intercept function does not work
during a Music Search operation.
Using Dolby noise reduction
When you listen to tapes that have been
recorded with Dolby B NR, turn Dolby B NR on.
1 Press FUNCTION to select B NR.
Press FUNCTION until Dolby B NR appears in
the display.
2 Press 5to turn Dolby B NR on.
Dolby B NR :ON appears in the display. The tape
will play with Dolby B NR on.
3 Press ∞to turn Dolby B NR off.
Dolby B NR :OFF appears in the display. The
tape will play without Dolby B NR.
Notes
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D sym-
bol are trademarks of Dolby Laboratories.
• The DOLBY B NR indicator lights when Dolby
B NR is turned on.
Playing a CD
You can use this unit to control a multi-CD player,
which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on page 17.
1DISC NUMBER indicator
Shows the disc currently playing.
2TRACK NUMBER indicator
Shows the track currently playing.
3PLAY TIME indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with the
1to 6buttons.
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as 1for disc 7, until the disc number
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
1
3
2

En 17
English Español Deutsch Français Italiano Nederlands
05
Section
Multi-CD Player
4 To perform fast forward or reverse, press
and hold 2or 3.
5 To skip back or forward to another track,
press 2or 3.
Pressing 3skips to the start of the next track.
Pressing 2once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations, Ready is displayed.
• If the multi-CD player does not operate prop-
erly, an error message such as ERROR-11 may
be displayed. Refer to the multi-CD player
owner’s manual.
• If there are no discs in the multi-CD player
magazine, NO DISC is displayed.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
Introduction of advanced multi-
CD player operation
1FUNCTION display
Shows the function status.
Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch between
the following functions:
PMODE (repeat play)—T.LIST (disc title list)—
RDM (random play)—SCAN (scan play)—ITS-P
(ITS play)—PAUSE (pause)—COMP (compres-
sion and DBE)
• To return to the playback display, press
BAND/ESC.
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
1

En
18
05
Section
Multi-CD Player
Repeating play
There are three repeat play ranges for the multi-
CD player: MCD (multi-CD player repeat), TRK
(one-track repeat), and DISC (disc repeat).
1 Press FUNCTION to select PMODE.
Press FUNCTION until Repeat appears in the
display.
2 Press 2or 3to select the repeat range.
Press 2or 3until the desired repeat range
appears in the display.
•MCD — Repeat all discs in the multi-CD
player
•TRK — Repeat just the current track
•DISC — Repeat the current disc
Notes
• If you select other discs during repeat play,
the repeat play range changes to MCD (multi-
CD player repeat).
• If you perform track search or fast
forward/reverse during TRK (one-track
repeat), the repeat play range changes to
DISC (disc repeat).
Playing tracks in a random order
Random play lets you play back tracks in a ran-
dom order within the repeat range, RANDOM
(multi-CD player repeat) and D.RANDOM (disc
repeat).
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select RDM.
Press FUNCTION until Random appears in the
display.
3 Press 5to turn random play on.
Random :ON appears in the display. Tracks will
play in a random order within the previously
selected RANDOM (multi-CD player repeat) or
D.RANDOM (disc repeat) ranges.
4 Press ∞to turn random play off.
Random :OFF appears in the display. Tracks will
continue to play in order.
Scanning CDs and tracks
While you are using T.SCAN (disc repeat), the
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
D.SCAN (multi-CD player repeat), the beginning
of the first track of each disc is played for about
10 seconds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Press FUNCTION to select SCAN.
Press FUNCTION until Scan appears in the dis-
play.

En 19
English Español Deutsch Français Italiano Nederlands
05
Section
Multi-CD Player
3 Press 5to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track of the present disc (or the
first track of each disc) is played.
4 When you find the desired track (or disc)
press ∞to turn scan play off.
Scan :OFF appears in the display. The track (or
disc) will continue to play.
• If the display has automatically returned to
the playback display, select SCAN again by
pressing FUNCTION.
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until Pause appears in the
display.
2 Press 5to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
3 Press ∞to turn pause off.
Pause :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
ming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press 5or ∞to select a CD.
2 Press FUNCTION and hold until TITLE
appears in the display, then press FUNCTION
to select ITS.
After TITLE is displayed, press FUNCTION
repeatedly, the following functions appear in the
display:
TITLE (disc title input)—ITS (ITS programming)
3 Select a desired track by pressing 2or 3.
4 Press 5to store the currently playing track
in the playlist.
ITS Input is displayed briefly and the currently
playing selection is added to your playlist. The
display then shows ITS again.
5 Press BAND/ESC to return to the playback
display.
Note
• After data for 100 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.

En
20
05
Section
Multi-CD Player
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist in
the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on page 18.
2 Press FUNCTION to select ITS-P.
Press FUNCTION until ITS Play appears in the
display.
3 Press 5to turn ITS play on.
ITS Play :ON appears in the display. Playback
begins of those tracks from your playlist within
the previously selected MCD (multi-CD player
repeat) or DISC (disc repeat) ranges.
• If no tracks in the current range are
programmed for ITS play then ITS Empty is
displayed.
4 Press ∞to turn ITS play off.
ITS Play :OFF appears in the display. Playback
will continue in normal order from the currently
playing track and CD.
Erasing a track from your ITS playlist
When you want to delete a track from your ITS
playlist, you can if ITS play is on.
If ITS play is already on, skip to step 2. If ITS play
is not already on, press FUNCTION.
1 Play a CD you want to delete a track from
your ITS playlist, and turn ITS play on.
Refer to Playback from your ITS playlist on this
page.
2 Press FUNCTION and hold until TITLE
appears in the display, then press FUNCTION
to select ITS.
After TITLE is displayed, press FUNCTION until
ITS appears in the display.
3 Select a desired track by pressing 2or 3.
4 Press ∞to erase a track from your ITS
playlist.
The currently playing selection is erased from
your ITS playlist and playback of the next track
from your ITS playlist begins.
• If there are no tracks from your playlist in the
current range, ITS Empty is displayed and nor-
mal play resumes.
5 Press BAND/ESC to return to the playback
display.
Erasing a CD from your ITS playlist
When you want to delete all tracks of a CD from
your ITS playlist, you can if ITS play is off.