Pioneer DEH-3200UB User manual

Operation Manual
Mode d’emploi
Manual de instrucciones
CD RECEIVER
AUTORADIO CD
RADIO CD
DEH-3200UB
English Français Español

Thank you for purchasing this PIONEER product.
To ensure proper use, please read through this manual before using this product. It
is especially important that you read and observe WARNINGs and CAUTIONsin
this manual. Please keep the manual in a safe and accessible place for future refer-
ence.
Before You Start
Information to User 3
For Canadian model 3
About this unit 3
After-sales service for Pioneer products 3
In case of trouble 4
Visit our website 4
Demo mode 4
Resetting the microprocessor 4
About this manual 4
Operating this unit
Head unit 5
Remote control 5
Display indication 6
Basic Operations 6
Use and care of the remote control 7
Menu operations identical for function
settings/audio adjustments/initial settings/
lists 8
Tuner 8
–Basic Operations 8
–Storing and recalling stations 8
–Function settings 8
CD/CD-R/CD-RW and USB storage
devices 9
–Basic Operations 9
–Displaying text information 9
–Selecting and playing files/tracks from
the name list 10
–Advanced operations using special
buttons 10
–Function settings 10
iPod 11
–Basic Operations 11
–Displaying text information 11
–Browsing for a song 11
–Advanced operations using special
buttons 12
–Function settings 12
Audio Adjustments 13
Initial Settings 14
Other Functions 15
–Using the AUX source 15
–Turning the clock display on or off 15
Additional Information
Troubleshooting 16
Error messages 16
Handling guideline 18
Compressed audio compatibility (disc,
USB) 19
iPod compatibility 20
Sequence of audio files 20
Copyright and trademark 21
Specifications 22
Contents
En
2

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and (2) this device must accept any inter-
ference received, including interference that
may cause undesired operation.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.
For Canadian model
This Class B digital apparatus complies with
Canadian ICES-003.
About this unit
The tuner frequencies on this unit are allo-
cated for use in North America. Use in other
areas may result in poor reception.
WARNING
Handling the cord on this product or cords asso-
ciated with accessories sold with the product will
expose you to chemicals listed on proposition 65
known to the State of California and other govern-
mental entities to cause cancer and birth defect
or other reproductive harm. Wash hands after
handling.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
CAUTION
!Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, damage to this unit, smoke, and over-
heating could result from contact with liquids.
!Always keep the volume low enough to hear
outside sounds.
!Avoid exposure to moisture.
!If the battery is disconnected or discharged,
any preset memory will be erased.
Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary infor-
mation is not available, please contact the
companies listed below:
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
Before You Start
En 3
English
Section
01

U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R 0P2
1-877-283-5901
905-479-4411
For warranty information please see the Lim-
ited Warranty sheet included with this unit.
In case of trouble
Should this unit fail to operate properly, please
contact your dealer or nearest authorized
PIONEER Service Station.
Visit our website
http://www.pioneerelectronics.com
!Learn about product updates (such as firm-
ware updates) for your product.
!Register your product to receive notices
about product updates and to safeguard
purchase details in our files in the event of
loss or theft.
!Access owner's manuals, spare parts infor-
mation, service information, and much
more.
Demo mode
Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
Demo mode
The demo automatically starts when the igni-
tion switch is set to ACC or ON while the unit
is turned off. Turning off the unit does not can-
cel demo mode. To cancel the demo mode,
press /DISP/SCRL. Press /DISP/SCRL
again to start. Operating the demo while the
ignition switch is set to ACC may drain battery
power.
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
!Prior to using this unit for the first time
after installation
!If the unit fails to operate properly
!When strange or incorrect messages ap-
pear on the display
RESET button
1 Remove the front panel.
2 Press RESET with a pen tip or other
pointed instrument.
About this manual
!In the following instructions, USB mem-
ories and USB audio players are collectively
referred to as “USB storage device.”
!In this manual, iPod and iPhone will be re-
ferred to as iPod.
Before You Start
En
4
Section
01

Head unit
1
1
1
7
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
d
e
c
a
b
b
b
f
g
h
9
8
Part Part
1SRC/OFF a6/PAUSE
2S.Rtrv b1to 6
3(list) c3/
4MULTI-CONTROL
(M.C.)d2/
5Disc loading slot e1/iPod
6h(eject) f/DISP/SCRL.
7USB port gCLK
8AUX input jack (3.5
mm stereo jack) hBAND/ESC
9Detach button
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to
connect the USB audio player/USB memory to
the USB port. Since the USB audio player/USB
memory is projected forward from the unit, it is
dangerous to connect directly.
Do not use the unauthorized product.
Remote control























Part Operation
iVOLUME Press to increase or decrease vo-
lume.
jMUTE Press to mute. Press again to un-
mute.
ka/b/c/d
Press to perform manual seek
tuning, fast forward, reverse and
track search controls. Also used
for controlling functions.
lAUDIO Press to select an audio function.
mDISP/SCRL
Press to select different displays.
Press and hold to scroll through
the text information.
nePress to pause or resume.
oFUNCTION
Press to select functions.
Press and hold to recall the initial
setting menu when the sources
are off.
pLIST/
ENTER
Press to display the list depending
on the source.
While in the operating menu,
press to control functions.
Operating this unit
En 5
English
Section
02

Display indication
12
5 7 9 bc e
4 6 8 a
d3
Indicator State
1
Main dis-
play sec-
tion
Tuner: band and frequency
Built-in CD ,USB and iPod:
elapsed playback time and text in-
formation
2(artist)
The disc (track) artist name is dis-
played.
Artist search refinement on the
iPod browsing function is in use.
3(disc)
The disc (album) name is dis-
played.
Album search refinement on the
iPod browsing function is in use.
4(song)
The track (song) name is dis-
played.
A playable audio file has been se-
lected while operating the list.
Song search refinement on the
iPod browsing function is in use.
5cAn upper tier of folder or menu
exists.
6(list) The list function is operated.
7d
A lower tier of folder or menu ex-
ists.
It flashes when a song/album re-
lated to the song currently playing
is selected from iPod.
8LOC The local seek tuning is on.
95(stereo) The selected frequency is being
broadcasted in stereo.
a(folder re-
peat)
Folder repeat is on.
When repeat function is on, only
is displayed.
b(folder ran-
dom)
Folder random is on.
When random function is on, only
is displayed.
c(shuf-
fle)
Shuffle or shuffle all function is
on while the iPod source is being
selected.
d(sound re-
triever)
The sound retriever function is
on.
eiPod CTRL (control mode) is set to
iPod.
Basic Operations
Important
!Handle gently when removing or attaching
the front panel.
!Avoid subjecting the front panel to excessive
shock.
!Keep the front panel out of direct sunlight and
high temperatures.
!Remove any cables and devices attached to
this unit before detaching the front panel to
avoid damage to the device or vehicle interior.
Removing the front panel to protect your unit from
theft
1Press the detach button to release the front
panel.
2Grab the front panel and remove.
3Always keep the detached front panel in the pro-
tection device such as protection case.
Re-attaching the front panel
1Slide the front panel to the left until it clicks.
Front panel and the head unit are connected on
the left side. Make sure that the front panel has
been properly connected to the head unit.
2Press the right side of the front panel until it is
firmly seated.
If you can’t attach the front panel to the head unit
successfully, try again. However, forcing the front
panel into place may result in damage.
Operating this unit
En
6
Section
02

Turning the unit on
1Press SRC/OFF to turn the unit on.
Turning the unit off
1Press SRC/OFF and hold until the unit turns off.
Selecting a source
1Press SRC/OFF to cycle between:
TUNER (tuner)—CD (built-in CD player)—USB
(USB)/USB-iPod (iPod)—AUX (AUX)
Adjusting the volume
1Turn M.C. to adjust volume.
Note
When this unit’s blue/white lead is connected to
the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s
source is turned on. To retract the antenna, turn
the source off.
Use and care of the remote
control
Using the remote control
1Point the remote control in the direction of the
front panel to operate.
When using for the first time, pull out the film
protruding from the tray.
Replacing the battery
1Slide the tray out on the back of the remote con-
trol.
2Insert the battery with the plus (+) and minus (–)
poles aligned properly.
WARNING
!Keep the battery out of the reach of children.
Should the battery be swallowed, consult a
doctor immediately.
!Batteries (battery pack or batteries installed)
must not be exposed to excessive heat such
as sunshine, fire or the like.
CAUTION
!Use one CR2025 (3 V) lithium battery.
!Remove the battery if the remote control is not
used for a month or longer.
!There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic objects.
!If the battery leaks, wipe the remote control
completely clean and install a new battery.
!When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions’rules that apply in your
country/area.
!“Perchlorate Material –special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/
perchlorate. (Applicable to California, U.S.A.)”
Important
!Do not store the remote control in high tem-
peratures or direct sunlight.
!The remote control may not function properly
in direct sunlight.
!Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Operating this unit
En 7
English
Section
02

Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list/category (the folder/ca-
tegory one level higher)
1Press /DISP/SCRL.
Returning to the main menu
Returning to the top tier of list/category
1Press and hold /DISP/SCRL.
Returning to the ordinary display
Canceling the initial setting menu
Returning to the ordinary display from the list/cate-
gory
1Press BAND/ESC.
Tuner
Basic Operations
Selecting a band
1Press BAND/ESC until the desired band (FM1,
FM2,FM3 for FM or AM) is displayed.
Manual tuning (step by step)
1Push M.C. left or right.
Seeking
1Push and hold M.C. left or right, and then re-
lease.
You can cancel seek tuning by pushing M.C. left
or right.
While pushing and holding M.C. left or right, you
can skip stations. Seek tuning starts as soon as
you release M.C.
Storing and recalling stations
You can easily store up to six stations for each
band as presets.
Using preset tuning buttons
1 When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2 Press one of the preset tuning buttons
(1 to 6) to select the desired station.
Using preset screen
1 Press to switch to the preset screen.
2 Use M.C. to store the selected fre-
quency in memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station. Press to select.
Note
You can also recall stored radio stations by push-
ing M.C. up or down during the frequency dis-
play.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1Press M.C. to turn BSM on.
To cancel, press M.C. again.
Operating this unit
En
8
Section
02

Local (local seek tuning)
Local seek tuning lets you tune in only those radio sta-
tions with sufficiently strong signals for good recep-
tion.
1Press M.C. to display the setting mode.
2Turn M.C. to select the desired setting.
FM: OFF—Level1—Level2—Level3—Level4
AM: OFF—Level1—Level2
Larger setting number is higher level. The highest
level setting allows reception of only the strongest
stations, while lower settings let you receive pro-
gressively weaker stations.
3Press M.C. to confirm the selection.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
CD/CD-R/CD-RW and USB
storage devices
Basic Operations
Playing a CD/CD-R/CD-RW
1Insert the disc, label side up, into the disc loading
slot.
1If a disc has already been inserted, press SRC/
OFF to select the built-in CD player.
Ejecting a CD/CD-R/CD-RW
1Press h(eject).
Playing songs on a USB storage device
1Open the USB connector cover.
2Plug in the USB storage device using a USB
cable.
Stop playing a USB storage device
1You may disconnect the USB storage device at
anytime.
Selecting a folder
1Push M.C. up or down.
Selecting a track
1Push M.C. left or right.
Fast forwarding or reversing
1Push and hold M.C. left or right.
Returning to root folder
1Press and hold BAND/ESC.
Switching between compressed audio and CD-DA
1Press BAND/ESC.
Notes
!When playing compressed audio, there is no
sound during fast forward or reverse.
!USB portable audio players that can be
charged via USB will be recharged when
plugged in and the ignition switch is set to
ACC or ON.
!Disconnect USB storage device from unit
when not in use.
!If plug and play is on and a USB storage de-
vice is present, depending on the type of de-
vice, the source may switch to USB
automatically when you turn on the engine.
Please change plug and play setting as neces-
sary. Refer to USB PnP (plug and play) on page
15.
Displaying text information
Selecting the desired text information
1Press /DISP/SCRL.
CD TEXT discs: Track number and play time—
disc title—disc artist name—track title—track ar-
tist name
WMA/MP3/AAC: Play time—folder name—file
name—track title—artist name—album title—
genre—comment—bit rate—folder and track
numbers
WAV: Play time—folder name—file name—track
title—artist name—album title—genre—com-
ment—sampling frequency—folder and track
numbers
Scrolling the text information to the left
1Press and hold /DISP/SCRL.
Notes
!Incompatible text stored with the audio file
may not be displayed or may be displayed in-
correctly.
!Depending on the version of iTunes used to
write MP3/AAC files onto a disc, comment in-
formation may be incorrectly displayed.
Operating this unit
En 9
English
Section
02

!When playing back VBR (variable bit rate)-re-
corded WMA files, the average bit rate value is
displayed.
!When playing back VBR (variable bit rate)-re-
corded MP3 files, VBR is displayed instead of
bit rate value.
!When playing back VBR (variable bit rate)-re-
corded AAC files, the average bit rate value is
displayed. However, depending on the soft-
ware used to decode AAC files, VBR may be
displayed.
Selecting and playing files/
tracks from the name list
1 Press to switch to the file/track
name list mode.
2 Use M.C. to select the desired file name
(or folder name).
Changing file or folder name
1Turn M.C.
Playing
1When a file or track is selected, press M.C.
Seeing a list of files (or folders) in the selected folder
1When a folder is selected, press M.C.
Playing a song in the selected folder
1When a folder is selected, press and hold M.C.
Note
Track title list will display the list of track titles on
a CD TEXT disc.
Advanced operations using
special buttons
Selecting a repeat play range
1Press 3/to cycle between the following:
CD/CD-R/CD-RW
!Disc –Repeat all tracks
!Track –Repeat the current track
!Folder –Repeat the current folder
USB storage device
!All –Repeat all files
!Track –Repeat the current file
!Folder –Repeat the current folder
Playing tracks in random order
1Press 2/to turn random play on or off.
Tracks in a selected repeat range are played in
random order.
Pausing playback
1Press 6/PAUSE to pause or resume.
Enhancing compressed audio and restoring rich
sound (sound retriever)
1Press S.Rtrv to cycle between:
OFF (off)—1—2
1is effective for low compression rates, and 2is
effective for high compression rates.
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Repeat (repeat play)
1Press M.C. to display the setting mode.
2Turn M.C. to select a repeat play range.
For details, refer to Selecting a repeat play range on
this page.
3Press M.C. to confirm the selection.
Random (random play)
1Press M.C. to turn random play on or off.
Pause (pause)
Operating this unit
En
10
Section
02