Pioneer MVH-330DAB User manual

English Français Italiano Español Deutsch Nederlands
DIGITAL MEDIA RECEIVER
RÉCEPTEUR NUMÉRIQUE MULTIMÉDIA
RICEVITORE MULTIMEDIALE DIGITALE
RECEPTOR DE MEDIOS DIGITALES
DIGITALER MEDIA RECEIVER
DIGITALE MEDIA-RECEIVER
MVH-330DAB
MVH-130DAB
Operation Manual
Mode d’emploi
Manuale d’istruzioni
Manual de instrucciones
Bedienungsanleitung
Bedieningshandleiding

- 2 -
English
Getting Started ........................................................................................ 3
Digital Audio Broadcasting (DAB)........................................................ 7
Radio.......................................................................................................... 8
USB/AUX.................................................................................................... 9
Bluetooth® ............................................................................................. 11
Settings .................................................................................................. 15
FUNCTION settings ............................................................................... 15
AUDIO settings ...................................................................................... 17
SYSTEM settings .................................................................................... 18
Additional Information ....................................................................... 19
About this manual:
•In the following instructions, a USB memory or USB audio player are referred to as
“USB device”.
Table of Contents

- 3 -- 3 -
English
MVH-330DAB
MVH-130DAB
Getting Started
Basic operation
SRC (source)/OFF
USB port
M.C. (multi-control) dial
BAND/DIMMER Display window
DISP (display)/DISP OFF Detach button
AUX input jack (3.5 mm stereo jack)
SRC (source)/OFF
Detach button
Display window
M.C. (multi-control) dial
BAND/DIMMER
DISP (display)/DISP OFF
DAB button
AUX input jack (3.5 mm stereo jack)
USB port

- 4 -
English
Frequently used operations
The available buttons vary depending on the unit.
* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the
source off.
Display indication
Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Purpose Operation
Turn on the power* Press SRC/OFF to turn on the power.
Press and hold SRC/OFF to turn off the
power.
Adjust the volume Turn the M.C. dial.
Select a source Press SRC/OFF repeatedly.
Change the display information Press DISP/DISP OFF repeatedly.
Press and hold DISP/DISP OFF to turn off
the display information and key
illumination.
Return to the previous display/list Press BAND/DIMMER .
Return to the normal display from the menu Press and hold BAND/DIMMER .
Answering a call Press any button.
Ending a call Press .
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the button is pressed.
Appears when random play is set (except when AOA is used).
Appears when repeat play is set (except when AOA is used).
Appears when a Bluetooth connection is made (page 11) (only for MVH-
330DAB).
Detaching the front panel

- 5 -- 5 -
English
Important
•Avoid subjecting the front panel to excessive shock.
•Keep the front panel out of direct sunlight and high temperatures.
•Always store the detached front panel in a protective case or bag.
When you turn the ignition switch to ON after installation, [SETUP:YES] appears in the
display.
1Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set
at this time, turn the M.C. dial to select [NO], then press to confirm.
2Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Setup menu
Menu Item Description
LANG Select the language to display.
[ENG](English),
[FRA](French),
[DEU](German)
CLOCK Set the clock.
1Turn the M.C. dial to adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2Turn the M.C. dial to adjust the minute, then press to confirm.
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100KHZ], [50KHZ]
DAB ANT Supply power to a DAB antenna. Select this when using the
optional DAB antenna (CA-AN-DAB.001, sold separately) with
the unit.
[ON]
[OFF] No power is supplied to a DAB antenna. Select this when using a
passive antenna with no booster.
Detach Attach

- 6 -
English
3[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],
then press to confirm.
4Press the M.C. dial to confirm the settings.
[UPDATING] appears in the display and the service list will be updated.
NOTES
•You can cancel the menu setting by pressing SRC/OFF.
•These settings can be made at any time from the SYSTEM settings (page 18) and INITIAL settings
(page 6).
1Press the M.C. dial to display the main menu.
2Turn the M.C. dial to select [SYSTEM], then press to confirm.
3Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4Turn the M.C. dial to select [YES], then press to confirm.
1Press and hold SRC/OFF until the unit turns off.
2Press the M.C. dial to display the main menu.
3Turn the M.C. dial to select [INITIAL], then press to confirm.
4Turn the M.C. dial to select an option, then press to confirm.
Canceling the demonstration display (DEMO OFF)
INITIAL settings
Menu Item Description
FM Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
DIMMER Change the display brightness.
Select [SYNC CLK] to set the duration of activating dimmer.
Select [MANUAL] to turn on/off dimmer by a press and hold of
BAND/DIMMER button.
[SYNC CLK],
[MANUAL]
RESET Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
(Some of the settings may be retained even after resetting the
unit.)
[YES], [NO]

- 7 -- 7 -
English
To receive DAB signals, connect a DAB antenna (CA-AN-DAB.001) (sold separately) to the
unit.
1Press SRC/OFF to select [DAB].
2Press BAND/DIMMER/ to select the band from [D1], [D2] or [D3].
3Press / to select a service component/station.
NOTE
Press and hold / then release to seek an available service. Scanning stops when the unit
receives a service.
To select service component/station from service lists
1During DAB reception, press .
Displays the list of all service components/stations.
2Select a service component/station from the list you selected, then press the M.C.
dial to confirm.
NOTE
You can update the service list by pressing and holding .
To store service components/stations
1While receiving the service component/station you want to store, press and hold
one of the number buttons (1/ to6/ ) until it stops flashing.
DAB ANT Supply power to a DAB antenna. Select this when using the
optional DAB antenna (CA-AN-DAB.001, sold separately) with
the unit.
[ON]
[OFF] No power is supplied to a DAB antenna. Select this when using a
passive antenna with no booster.
Digital Audio Broadcasting (DAB)
Seeking a service component/station
Presetting service components/stations
Menu Item Description

- 8 -
English
To retrieve stored service components/stations
1Select the band, then press a number button (1/ to6/).
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
The six strongest stations are stored on the number buttons (1/ to6/).
1After selecting the band, press the M.C. dial to display the main menu.
2Turn the M.C. dial to select [FUNCTION], then press to confirm.
3Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 17).
To store stations manually
1While receiving the station you want to store, press and hold one of the number
buttons (1/ to6/ ) until it stops flashing.
The unit searches for a station by PTY (program type) information.
1Press during FM reception.
2Turn the M.C. dial to select a program type from [NEWS/INF], [POPULAR],
[CLASSICS] or [OTHERS].
Radio
Best stations memory (BSM)
Using PTY functions

- 9 -- 9 -
English
3Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service name is
displayed.
NOTES
•To cancel the search, press BAND/DIMMER/.
•The program of some stations may differ from that indicated by the transmitted PTY.
•If no station is broadcasting the type of program you searched for, [NOT FND] is displayed for about
two seconds and then the tuner returns to the original station.
1Press SRC/OFF to select [RADIO].
2Press BAND/DIMMER to select the band from [F1], [F2], [F3] or [AM].
3Press a number button (1/ to6/).
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 17).
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)
1Open the USB port cover.
2Plug in the USB device using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device is connected to the unit, set [USB A] to [ON]
in the SYSTEM settings (page 18).
CAUTION
Use a USB cable (sold separately) to connect the USB device as any device connected directly to the
unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
Receiving preset stations
USB/AUX
Playing back

- 10 -
English
AOA connections
A device installed with Android OS 5.0 or later (up to Android 7.x)* can be connected to
the unit via AOA, using the cable supplied with the device.
* AOA 2.0 does not support Android OS 8.0 or later.
This function is compatible with devices that have Android OS 5.0 or later (up to Android
7.x)* installed and also support AOA (Android Open Accessory) 2.0.
* AOA 2.0 does not support Android OS 8.0 or later.
1Press SRC/OFF to select [USB].
"ANDROID" is displayed after reading.
NOTE
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own
software design, regardless of the OS version.
Basic operations
AUX
1Insert the stereo mini plug into the AUX input jack.
2Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 18).
You can make various adjustments in the FUNCTION settings (page 15).
Note that the following operations do not work for an AUX device. To operate an AUX
device, use the device itself.
Listening to music on Android
Purpose Operation
Select a track Press or .
Pause/resume playback Press 4/.
Operations
Purpose Operation
Select a folder Press 1/ or2/.
Select a track Press or .
Fast forward or reverse Press and hold or .