Pioneer S-X360 User manual

ORDER NO.
PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2006
RRV3360
T – ZZS FEB. 2006 Printed in Japan
SPEAKER SYSTEM
Front
Center
Surround
S-X360XTW/UC
S-X360XTW/EW5
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-
yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to
properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the
warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 – Proposition 65

2
1234
1234
C
D
F
A
B
E
S-X360
NSP 1 CS Assy (Front) SMW1927
NSP 2 CS Assy (Surround) SMW1928
NSP 3 CS Assy (Center) SMW1929
2-1. PACKING
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
N
OTES:
2. PARTS LIST
Mark No. Description Part No.
1
2
3
6
7
5
5
8
4
Mark No. Description Part No.
NSP 4 Accessory Set SEA1711
Speaker Wire (FL: White) SDS1174
Speaker Wire (FR: Red) SDS1175
Speaker Wire (SL: Blue) SDS1176
Speaker Wire (SR: Gray) SDS1177
Speaker Wire (C: Green) SDS1178
NSP Bracket Set SEA1680
NSP Screw Set SEA1676
Screw BMZ50P120FNC
Polyethylene Bag S0 SHL1314
Mounting Bracket SNN1047
Polyethylene Bag S1 SHL1429
Non Skid Pad (for Subwoofer) SEC1912
Non Skid Pad (for Front, Center) SEP6002
Polyethylene Bag S2 SHL1251
5Protector SHA2509
6Polyethylene Bag S1 SHL1419
7Polyethylene Bag S2 SHL1420
for XTW/UC type
NSP Model Label (FL) SAN3794
NSP Model Label (FR) SAN3795
NSP Model Label (SL) SAN3796
NSP Model Label (SR) SAN3797
NSP Model Label (C) SAN3798
8Packing Case SHG2722
for XTW/EW5 type
NSP Model Label (FL) SAN3820
NSP Model Label (FR) SAN3821
NSP Model Label (SL) SAN3822
NSP Model Label (SR) SAN3823
NSP Model Label (C) SAN3824
8Packing Case SHG2723
1. FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
CS Assy ( Front )
The grille assy is attached to the cabinet by 4 external screws.
To detach it, unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first unfasten those screws. Next remove the cabi-
net. Then remove the cable.
When attaching it, face its terminal downward.
CS Assy ( Surround )
The grille assy is attached to the cabinet by its bosses. To de-
tach it, pry it open by inserting a flat blade screw driver into
lower slot.
To attach it, press it to the inner baffle.
The speaker unit is attached to the inner baffle by 4 external
screws.
To detach it, first remove the grille assy. Next unfasten those
screws, and remove the cable.
When attaching it, face its terminal downward.
CS Assy ( Center )
The grille assy is attached to the cabinet by 8 external screws.
To detach it ,unfasten those screws.
The speaker unit, together with the grille assy, is attached to the
cabinet by 4 external screws.
To detach it, first remove the grille assy. Next remove the cabi-
net. Then remove the cable.
When attaching it, face its terminal toward the input terminal.
Packing Parts List

3
1234
1234
C
D
F
A
B
E
S-X360
CS Assy (Front) Parts List
NSP 16 Cabinet SNK2928
17 Grille SMG1864
NSP 18 Badge 28 SAM1506
NSP Grille Cloth SAS1603
NSP Baffle SNK2847
19 Connecting Cord SDD1345
20 Input Terminal SKX1096
2-2. CS Assy (Front)
24
16
17 23
18
19
21 21 22
20
Model Label 25 (x4)
< TOP >
< FRONT >
< BACK >< A-A' : SECTION >
< SIDE (LEFT) >
←A
←A'
NSP 21 Acoustic Absorbent (White) SMV2194
NSP 22 Acoustic Absorbent (Black) SMV2198
23 Speaker K77DU55-52C
24 Screw (for Input Terminal) BPZ35P080FNI
25 Screw (for Cabinet) BPZ35P120FNI
Mark No. Description Part No. Mark No. Description Part No.

4
1234
1234
C
D
F
A
B
E
S-X360
32 or 33
31
40
39
(x2)
44
(x4)
34
36
37
38
41
35
42
43
(x5)
Glue
Model Label
only surround (R)
only surround (L)
Bent to 45° − 55°
Mark No. Description Part No.
CS Assy (Surround) Parts List
NSP 31 Inner Baffle SNK2848
NSP 32 Cabinet (L) SNK2929
NSP 33 Cabinet (R) SNK2930
34 Grille SMG1865
NSP 35 Badge 28 SAM1506
NSP Grille Cloth SAS1604
NSP Grille Frame SMH1117
36 Connecting Cord SDD1345
37 Gasket SEC1910
38 Packing (size: 4 x 104) SEC1927
39 Packing (size: 4 x 111) SEC1928
40 Packing (size: 4 x 84) SEC1929
41 Input Terminal SKX1096
42 Speaker K77DU55-51C
43 Screw (for Speaker, Input Terminal) BPZ35P080FNI
44 Screw (for Inner Baffle) BPZ35P120FNI
2-3. CS Assy (Surround)

5
1234
1234
C
D
F
A
B
E
S-X360
CS Assy (Center) Parts List
2-4. CS Assy (Center)
58
51
59
52
56
Model Label
61 (x8)
57 (x2)
54
60
55
(x2)
53
NSP 51 Cabinet SNK2931
52 Grille SMG1866
NSP 53 Badge 28 SAM1506
NSP Grille Cloth SAS1605
NSP Baffle SNK2852
54 Connecting Cord SDD1345
55 Packing SEC1913
56 Input Terminal SKX1096
NSP 57 Acoustic Absorbent (White) SMT1293
NSP 58 Acoustic Absorbent (Black) SMV2198
59 Speaker K77DU55-51C
60 Screw (for Input Terminal) BPZ35P080FNI
61 Screw (for Cabinet) BPZ35P120FNI
Mark No. Description Part No.

6
1234
1234
C
D
F
A
B
E
S-X360
3. SCHEMATIC DIAGRAM
INPUT Speaker
White
Red
Connecting Cord (SDD1345)
1. CS Assy (Front, Center, Surround)