Pit boss 550 navigator User manual

MODEL / MODÈLE / MODELO / MODELL / MODELLO : PB550G

PART / PIÈCE / PARTE / TEIL / PARTE : 10613

  |  '

   |  |   

 

  

IMPORTANT, READ CAREFULLY, RETAIN FOR

FUTURE REFERENCE. MANUAL MUST BE

READ BEFORE OPERATING!

   

  

IMPORTANT, PRENEZ CONNAISSANCE DE

CE DOCUMENT ET CONSERVEZ-LE POUR

RÉFÉRENCE ULTÉRIEURE. VOUS DEVEZ LIRE

CE GUIDE AVANT D’UTILISER LE BARBECUE!

   

  

IMPORTANTE, LEER DETENIDAMENTE,

CONSERVAR PARA REFERENCIA FUTURA.

LEA EL MANUAL ANTES DEL USO!



 

WICHTIG: AUFMERKSAM LESEN UND GUT

AUFBEWAHREN BITTE UNBEDINGT VOR

GEBRAUCH DIE BEDIENUNGSANLEITUNG

SORGFÄLTIG DURCHLESEN!

   

  

IMPORTANTE: LEGGERE ATTENTAMENTE E

CONSERVARE PER RIFERIMENTO FUTURO.

LEGGERE IL MANUALE PRIMA DELL'USO.

For outdoor and household use only. Not for commercial use.

Réservé à l'usage extérieur et résidentiel uniquement. Non destiné à un usage commercial.

Solo para uso doméstico y en el exterior. No apto para uso comercial.

Bitte nur im Freien und privat nutzen. Nicht für die gewerbliche Anwendung geeignet.

Solo per uso domestico ed esterno. Non per uso commerciale.

            ,

  .       

  ,     .     

         .

    ’    ’ 

’          .  

        ,  

   .      

     '     .

             

     .      ,

   ,      .

           

 ,            

.

        ,   

,     .  

    ,   

  .        ,

       

     .

  '   '  '  

      .    

     ,    .  

    '        

          .

EN ENGLISH

Parts & Specs...................................................................... 3

Assembly Preparation...................................................... 5

Assembly Instructions

Securing Feet To Support Legs..................................................5

Securing Support Plates .............................................................5

Securing Support Plates and Wheels.......................................6

Securing Support Plate To Support Legs For Wheels...........6

Securing Support Plate To Support Legs ................................6

Mounting Main Barrel To The Cart........................................... 7

Installing The Lid Stopper .......................................................... 7

Installing The Lid Handle............................................................ 7

Installing The Flame Broiler Components...............................8

Installing Flame Broiler Adjusting Bar.....................................8

Installing The Side Shelf .............................................................8

Securing The Front Shelf Brackets............................................9

Installing The Front Shelf ...........................................................9

Installing The Grill Cooking Components ...............................9

Installing Grease Bucket ..........................................................10

Connecting To A Power Source................................................10

  

may be copied, transmitted, transcribed, stored in a retrieval

system, in any form or by any means without expressed

written permission of,

 

11 Rue Galvani Paris, France 75017

  

3411 North 5th Avenue, Suite 500, Phoenix, AZ, USA 85013

 

www.pitboss-grills.com

ENGLISH

  

Part# Description

1 Lid Stopper (x1)

2 Lid Handle (x1)

3 Lid Handle Bezel (x2)

4 Main Barrel (x1)

5 Flame Broiler Adjusting Bar (x1)

6 Flame Broiler Adjusting Bar Handle (x1)

7 Flame Broiler Slider (x1)

8 Flame Broiler Main Plate (x1)

9 Left Front Leg (x1)

10 Left Back Leg (x1)

11 Right Front Leg (x1)

12 Right Back Leg (x1)

13 Left Front Leg Trim Piece (x1)

14 Left Back Leg Trim Piece (x1)

15 Wheel (x2)

16 Right Bottom Support Plate (x1)

17 Left Bottom Support Plate (x1)

18 Short Support Plate (x2)

19 Front/Back Long Support Plate (x2)

20 Front Shelf (x1)

21 Front Shelf Bracket Right (x1)

22 Front Shelf Bracket Left (x1)

23 Grease Bucket (x1)

24 Right Side Table (x1)

25 Cooking Grid (x2)

26 Warming Rack (x1)

27 Meat Probe (x1)

28 Power Cord Clip (x1)

29 Power Cord - F Plug (x1)

30 Power Cord - G Plug (x1)

Part# Description

A Screw (x18)

B Washer (x18)

C Locking Washer (x18)

D Screw (x30)

E Wheel Axle Pin (x2)

F Wheel Cotter Pin (x2)

G Wheel Washer (x2)

NOTE: Due to ongoing product development, parts are subject to change without notice. Contact

Customer Care if parts are missing when assembling the unit.

PB – ELECTRIC REQUIREMENTS

220-240 V, 50 Hz, 250 W, GROUNDED PLUG

Diagram Illustration on next page.

MODEL UNIT ASSEMBLED (WxHxD) UNIT WEIGHT COOKING AREA TEMP. RANGE DIGITAL FEATURES



550

1,227mm x 1,195mm x 868mm

/ 48.3” x 47” x 34.17”

55.7 kg /

122.8 lb

Main

- 2580.6 cm / 400 sq. in.

Upper Rack

- 920 cm / 142.6 sq. in.

TOTAL

- 3500.6 cm / 542.6 sq. in.

82-260°C /

180-500°F

Ten temperature

presets, start-up and

cool-down cycles,

electric igniter

EN ENGLISH









ENGLISH

 

IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws

completely until all screws for that step have been installed. Hardware combination involving a locking washer and

washer should be installed with the locking washer closest to the head of the screw.

1.     

Parts Required:

1 x Left Front Leg

(#9)

1 x Left Back Leg

(#10)

1 x Left Front Leg Trim Piece

(#13)

1 x Left Back Leg Trim Piece

(#14)

6 x Screw

(#D)

Installation:

• Use three screws to attach the Left Front Leg Trim Piece to the Left Front Leg.

Continue to install the Left Back Leg and Left Back Leg Trim Piece.

2.   

Parts Required:

1 x Left Front Leg

(#9)

1 x Left Back Leg

(#10)

1 x Left Bottom Support Plate

(#17)

1 x Short Support Plate

(#18)

8 x Screw

(#D)

Installation:

• Install one Short Support Plate to the side of the unit between of a Front

and Back Support Legs using four screws. Repeat the same installation

to mount the Bottom Support Plate to the same legs.

NOTE: Make sure Bottom Support Plate is facing up with correct direction.

 

Parts are located throughout the shipping carton, including underneath the grill. Inspect the grill, parts, and hardware blister

pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the grill

before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt

to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss®Customer Care for parts.

www.pitboss-grills.com

IMPORTANT: To ease installation and avoid injury, use two people when assembling this appliance.

Tools required for assembly: screwdriver and level.

Tools not included.

EN ENGLISH

3.     

Parts Required:

1 x Right Front Leg

(#11)

1 x Right Back Leg

(#12)

1 x Right Bottom Support Plate

(#16)

1 x Short Support Plate

(#18)

2 x Wheel

(#15)

8 x Screw

(#D)

2 x Wheel Axle Pin

(#E)

2 x Wheel Cotter Pin

(#F)

2 x Wheel Washer

(#G)

Installation:

• Install one Short Support Plate to the side of the unit between of a Front

and Back Support Legs using four screws. Repeat the same installation

to mount the Bottom Support Plate to the same legs.

• Attach the large Wheel to the Support Leg by inserting the Wheel Axle

Pin through the Wheel Support Leg hole, then secure using the Wheel

Cotter Pin. Repeat installation for other Wheel on the same side.

NOTE: Make sure Bottom Support Plate is facing up with correct direction.

4.        

Parts Required:

2 x Front/Back Long Support Plate

(#19)

4 x Screw

(#D)

Installation:

• Secure one Long Support Plate to one Support Leg for Wheel using two

screws. Ensure the flat side of the Support Plate is facing outwards.

Repeat the same installation to mount the other Long Support Plate to

the other Support Leg.

5.      

Parts Required:

4 x Screw

(#D)

Installation:

• Next, Secure the Long Support Plates to the Support Legs. Secure using

two screws for each plate.

12 11







ENGLISH

6.      

Parts Required:

1 x Main Barrel

(#4)

12 x Screw

(#A)

12 x Washer

(#B)

12 x Locking Washer

(#C)

1 x Power Cord

(#29 or 30)

1 x Cable Clip

(#28)

Installation:

NOTE: There are two Power Cords supplied. Select the Power Cord that is

required for your region.

• Place the cable clips on the correct power cord. Insert the power cord

into the grove at the bottom of the hopper. Secure the cable clip to

the bottom of the hopper with the previously installed screw. Note

Illustration 6A.

• Prepare the Main Barrel to be mounted to the cart. Carefully, lift the Cart

into an upright position with the Wheels on the bottom. Position the

Cart next to the Main Barrel, with both facing the same direction. Using

a second person, prepare to lift the Main Barrel onto the Cart. With one

person lifting from the hopper side, and the other person lifting from

the opposing barrel end, carefully lift the Main Barrel, and slowly lower

onto the cart. Note illustration 6B.

• Next, open the Main Barrel lid. Adjust the rotation as needed to align the

screw holes of the Main Barrel to the Cart. Once placed, secure each leg

to the Main Barrel using three Screws, Washers, and Locking Washers.

Note illustration 6C.

7.    

Parts Required:

1 x Lid Stopper

(#1)

Installation:

• Secure the Lid Stopper onto the top of the Main Barrel using the pre-

installed screw on top of the Main Barrel.

8.    

Parts Required:

1 x Lid Handle

(#2)

2 x Lid Handle Bezel

(#3)

Installation:

• Remove the pre-installed screws from the Lid Handle. From inside the

barrel lid, insert one screw protrude to the outside. Add a Bezel on

the screw. Then hand-tighten the screw (from the inside) into the Lid

Handle. Repeat for other side.

6

6





6

29/30

EN ENGLISH

9.     

Parts Required:

1 x Flame Broiler Main Plate

(#8)

1 x Flame Broiler Slider

(#7)

Installation:

• Insert the Flame Broiler Main Plate into the main grill. Rest the Flame

Broiler Main Plate on the built-in ledge (on the inside right) of

the main grill that directs grease towards the grease bucket spout. Slide

the entire piece to the left side, and the two slots on the Flame Broiler

Main Plate will fit into the rounded ledge above the burn pot. It will sit

slightly at a downward angle. Note illustration 9A.

IMPORTANT: If the Main Plate is resting on the base of the Barrel,

it is installed incorrectly. Poor installation may result in damage to

your Main Grill Barrel.

• Place the Flame Broiler Slider on top of the Flame Broiler Main Plate

covering the slotted openings. Ensure the raised tab is on the left

and the two pins at the bottom of the Flame Broiler Slider place into

the holes of the Flame Broiler Main Plate to easily adjust for direct and

indirect flame when cooking. Both flame broiler parts are lightly

coated with oil to avoid rusting when shipped. Note illustration 9B.

NOTE: To maintain the searing and grilling performance of your cooking

grids, regular care and maintenance Is required. See Owner's Manual.

10.     

Parts Required:

1 x Flame Broiler Adjusting Bar

(#5)

1 x Flame Broiler Adjusting Bar Handle

(#6)

Installation:

• Insert the Flame Broiler Adjusting Bar through the opening hole on

the left side of the Main Barrel. Add the Flame Broiler Adjusting Bar

Handle on the end outside the barrel. Next, slide the notched end of the

Adjusting Bar into the locking tab on the Flame Broiler Slider, giving you

adjustable access to the Flame Broiler Slider on the Main Plate.

11.    

Parts Required:

1 x Right Side Table

(#24)

2 x Screw

(#A)

2 x Washer

(#B)

2 x Locking Washer

(#C)

Installation:

• Loosen the two pre-installed screws from the side of the Main Barrel.

Hook up the Right Side Table on the screws first then secure the two

pre-loosened screws into place.

• From underneath, secure the Right Side Table to the side panel of the

Main Barrel using two screws, washers, and locking washers.

9 7

9 8

11 24











ENGLISH

12.     

Parts Required:

1 x Front Shelf Bracket Right

(#21)

1 x Front Shelf Bracket Left

(#22)

4 x Screw

(#A)

4 x Washer

(#B)

4 x Locking Washer

(#C)

Installation:

• Secure each Front Shelf Support Bracket onto the Front Support Leg by

using two screws, washers and locking washers.

13.    

Parts Required:

1 x Front Shelf

(#20)

Installation:

• Place the Front Shelf on the Front Shelf Support Brackets. Note

illustration 13A as unfolded Front Shelf.

• Note illustration 13B as folded Front Shelf.

• Front Shelf can also be placed on the Bottom Support Plates and be used

as Bottom Plate. Note illustration 13C.

14.     

Parts Required:

2 x Cooking Grids

(#25)

1 x Warming Rack

(#26)

Installation:

• Place the Cooking Grids, side by side, on the grid ledge inside the Main Grill.

• Place the Upper Warming Rack on the upper ledge inside the Main Grill.

The Warming Rack will lock into place.



13

13

13

EN ENGLISH

15.    

Parts Required:

1 x Grease Bucket

(#23)

Installation:

• Place the Grease Bucket on the spout hook on the end of the Main Barrel.

Ensure it is level to avoid grease spills.

• The unit is now completely assembled.

16.     

NOTE: Before plugging your Pit Boss®into any electrical outlet, ensure

the temperature dial is in the OFF position.

•

 

This appliance requires 220-240 volts, 50Hz, 250w service. It must be a

grounded plug.

IMPORTANT: Disconnect unit from power source when not in use.

IMPORTANT: Refer to Owner's Manual for Operating Instructions

Table of contents

Other Pit Boss Grill manuals

Pit Boss

Pit Boss 820 User manual

Pit Boss

Pit Boss PB2BPGG User manual

Pit Boss

Pit Boss 1150 PRO Series User manual

Pit Boss

Pit Boss PB150PPG Quick guide

Pit Boss

Pit Boss PB3BPGG User manual

Pit Boss

Pit Boss PB1000T2 Parts list manual

Pit Boss

Pit Boss PBCSL200 User manual

Pit Boss

Pit Boss PLATINUM LAREDO 1000 User manual

Pit Boss

Pit Boss Navigator PB700G User manual

Pit Boss

Pit Boss LEXINGTON PB500LXW1 User manual

Pit Boss

Pit Boss PB700FB Installation instructions

Pit Boss

Pit Boss PB1000T1 Parts list manual

Pit Boss

Pit Boss Navigator PB1150G User manual

Pit Boss

Pit Boss SAVANNAH PB1500NX User manual

Pit Boss

Pit Boss PBMEMUU001 Parts list manual

Pit Boss

Pit Boss RANCH HAND PB440TGR1 Parts list manual

Pit Boss

Pit Boss PB24K User manual

Pit Boss

Pit Boss PB0820D3 Installation instructions

Pit Boss

Pit Boss PB820S User manual

Pit Boss

Pit Boss 440D2 Installation instructions

Pit Boss

Pit Boss PBMEMUU001 Parts list manual

Pit Boss

Pit Boss PB700S Quick guide

Pit Boss

Pit Boss Navigator 150 User manual

Pit Boss

Pit Boss PB2BPGG User manual

Popular Grill manuals by other brands

LMS

LMS BBQ08873P owner's manual

Cookworks

Cookworks LW-8010A Care & instruction manual

Campingaz

Campingaz CV Instructions for use

Metos

Metos XBL Series Installation and operation manual

Fiesta

Fiesta ET34567 Use and care instructions

Mayer Barbecue

Mayer Barbecue BRENNA MKG-318A BASIC Assembly instructions

Landmann

Landmann Avalon PTS Plus 5.1 Plus 12122 Assembly and operating manual

Kenyon

Kenyon B70200 owner's manual

Better Homes and Gardens

Better Homes and Gardens GBC1486W owner's manual

Orbegozo

Orbegozo GR 2300 instruction manual

bora

bora PT11 Operating and installation instructions

Klarstein

Klarstein 10031664 manual

Garland

Garland MWE3W Installation and operation manual

Char-Broil

Char-Broil 463722714 Product guide

MPM

MPM MOP-03 user manual

Kenmore

Kenmore 415.16123800 Use and care guide

Tucker Barbecues

Tucker Barbecues GTR Series Assembly, installation and operating instructions

Monogram

Monogram ZGG540NCP1SS owner's manual

Pit Boss 550 Navigator User manual

Popular Grill manuals by other brands