Plastic Safety Systems, Inc. SafetyRail User manual

Before you begin:
•AlwaysassembleSafetyRailon-site.
 Donotattempttodraganassembled
 arraytoanotherlocation.
•Forasuccessfulassembly:
 Alwaysattachthelowerguiderailrst!
Line-up the guide rail with the
upright.
Inserttheguiderailintothecenter
ofthebushing.
The inserted end of the guide rail
must rest ush against the back of
theupright.
Securetheupperandlowernotches
oftheguiderailwiththebushing.
Use the side of the bushing that is
closer to the direction in which the
barricadearraywillbebuilt.
Turntheguiderailintoapositionperpendicularto
theupright.
Theguiderailshouldturneasily,withoutforce.
Iftheguiderailbinds,donotforceittoturn.
Simply, reverse the process: disengage the guide
rail,andstartagain.
At this point, the SafetyRail
Barricadeshouldlookjustlikethis.

For instructions to attach the
secondupright,seeover.
SafetyRail™
ADA-Compliant Pedestrian Barricade
1 2 3
456
Assembly Instructions
Attach Guide Rails to the First Upright:
Use the LIST method
Line-up - Insert - Secure - Turn
No hand tools required.

Insert and center the guide rail,
beginningwiththelowerguiderail.
Make the guide rail ush with the
backoftheupright.
Secure the guide rail with the
bushing.
Usethesideofthebushingcloser
totheuprightalreadyattached.
Line-up the upright with the
guiderails.
TurntheUPRIGHTtothe
desiredposition.
SafetyRailwillaccom-
modateTypeAorC
warninglights.
SafetyRailwillalsoaccommodatesomeaudiblewarning
devices,asshowninthepictureontheright.
PSSdoesnotmanufactureormarketwarningdevices.
“On the Roadway for Safety”®
2444 Baldwin Road • Cleveland, OH • 44104 • 800-662-6338 • www.plasticsafety.com
7 8 910
SafetyRail™ Assembly Instructions, continued
11 12
Attach more Guide Rails and Uprights:
Line-uptheguiderailswiththe2nd
upright, beginning with the lower
guiderail.
Insert and center the guide rail
in the bushing. Make the guide rail
ushwiththebackoftheupright.
Secure the guide rail with the
bushing, in the same direction in
which the barricade array will be
built.
Turn the guide rail to the desired
position, and then attach another
upright.
Ballast Options Warning Device Options
Usesandbags,orllSafetyRailwithupto25lbs.ofsand.
Notenoughspacetoline-uptheguiderails?Turntheuprightuntiltheobstacleiscleared.
Copyright©2010 2/10
Attach the 2nd Upright: