Playcore POWER SYSTEMS Apex Cage User manual

Apex Cage
IMPORTANT INFORMATION
PLEASE READ AND KEEP
DISCLAIMER
The following guidelines should be observed when using the Apex Cage.
•Always consult your physician before participating in any physical activity.
•Read all instruction carefully before using.
•Inspect the Apex Cage for damage before each use. DO NOT USE IF DAMAGED –REPLACE
IMMEDIATELY.
•The Apex Cage is intended for use only as described in this document. Other uses are not
recommended.
•Power Systems, Inc., assumes no liability for injuries, accidents, or damages that may occur with
the use of the Apex Cage.
For more information regarding the Apex Cage
Or other training products and programs, contact:
Power Systems, Inc
www.power-systems.com
1-800-321-6975
Copyright © 2019 by Power Systems, Inc.

Apex Cage
1. Attach the bottom panel to the side panels (These are the long panels)
2. Attach the front and back of the cage.(These are the short panels)

(The front panel will be the one with the loop that will be used for locking the unit.)

3. Attach the tires ensuring both locking tires are on the same end as your handle as shown.
4. Attach both pistons to the sides of the cage as shown in the diagram. Now attach the lid of the unit.
Use caution in attaching the other end of the pistons to the lid as shown.
5. At this point ensure all bolts on the entire unit are correctly tightened before using your Apex Cage.
• Given the size and shape of the Apex Cage two person assembly is recommend.
• We recommend that you check the tire pressure ensuring they are evenly inflated before use.
Copyright © 2019 by Power Systems, Inc.