Point 65 martini User manual

Point 65 Sweden
Manual

This manual will help you with the basics of
putting your Martini together for your next
paddling experience. After some practice it
takes literally 10 seconds to assemble your
Martini. To take it apart you only need to
reverse the process. Please read the warn-
ing sticker on your kayak for a safe and
fun paddling experience. You will also find
instructional films on www.point65.com
happy paddling!

3.
Place ratchet strap in correct position in buckle
on both sides of the kayak
Straddle the back part of the kayak and lift,
hooking the two parts. Then lower, automati-
cally locking them.
Push both parts of the kayak together, so that
the ratchet strap is approx 2 cm inside the buckle.
Tighten the buckle, but do not overload buckle,
this can damage the ratchet strap.
1. 2.
4.

Pull the loop end of the rudder lines through
the holes in the rudder head from above.
Tighten the loops over the corners by pulling
on the rudder lines.
After pushing the loop through the hole, fold
them back over the end corners.
Make sure the line runs along the outside of
the 2 deck fittings on either side of the hatch.
3.
1. 2.
4.

MAX
10kg
Always use a personal flotation device when
paddling. Read warning sticker on kayak before
usage.
Never carry or drag the kayak whith someone
sitting in the kayak, this can damage the lock-
ing system.
Never place heavy objects in the kayak while
carrying or dragging, this can damage the
locking system.
Never paddle the kayak in surf larger than
3 feet in Tandem or 5 feet in Solo, this can lead
to damage in the locking system.

www.point65.com