Polanik T2-LB14 User manual

TECHNICAL SPECIFICATION
ASSEMBLY MANUAL
LED lap counter with bell
T2-LB14
File: 2016-01-11
PRODUCT SUPPORT
Pawel Ciechanowski
p.ciechano[email protected]m

Technical specification / user manual T2-LB14 2 / 4
ATTENTION!
The board is an electronic device and it requires careful handling!
I. General use
The 2-digit board is designed to display the number of remaining laps to in the athletics races.
II. Technical specification
Code
T2-LB14
Type
Lap counter with bell
Power supply AC [V]
230
Power consumption [VA]
50
Frontal cover
solid polycarbonate
Display type
LED
Display colour
red
Digit height [cm]
25 cm
Good visibility [m]
100 m
Maximum visibility [m]
125 m
Displayed information –the number of laps (standalone operation)
00
Max view angle [°]
120
Weight [kg]
10
Casing
aluminium, powder painted, for outdoor
Temperature range
from -10°C to +50°C
Set contains
tripod, counter control keypad
Handheld counter control keypad –functions:
+- increases the value
KASUJ/CLEAR - clears the clock to 0
-- decreases the value

Technical specification / user manual T2-LB14 3 / 4
III. Assembly
1. Set up the counter before the finish line on the stadium infield, at the track no. 1. Unfold the tripod.
2. Attach the arm with the bell to the tripod profile. The handle should lock on the knob.
3. Install the counter on the tripod profile.
4. Connect the counter to the power supply .
5. The counter tests led display units (all segments light up for about 2s).
6. Then the clock shows “0”, and it is ready to use.
IV. Operating
Operate the counter display with the handheld keypad:
a) press +/-to set the desired value
b) press CLEAR/KASUJ to reset the clock.
V. Storage and Maintenance
The display board is an electronic device and it requires careful handling. During idle periods it must be stored in
a roofed and dry place. Before cleaning, disconnect the power cord. Wipe the front panel with a soft cloth or an agent
for cleaning polycarbonate surfaces.

Technical specification / user manual T2-LB14 4 / 4
VI. Declaration
1) No. 2016-01-11
2) Issuer’s name: POLANIK
Issuer’s address: Zyczliwa 11, 97-300 Piotrkow Tryb.
3) Object of declaration:
4) The object of declaration described above is in conformity with the requirements of the company production internal norms.
Additional Information
5) Declaration for:
Buyer/Distributor/User
Signed for and in behalf of:
POLANIK
2016-01-11 Piotrkow Tryb.
(Date and place of issue)
6) Pawel Ciechanowski
Product Manager
…………………….…………………………. ……………………………………………………………………………
(Name, function) (Signature or equivalent authorized by the issuer)
No.
Description of goods
Code
1
LED lap counter with bell
T2-LB14