Polanik W-435 User manual

INSTRUCTION MANUAL
High jump school landing area
W- 35
File: 2014-07-18
Product support
Paweł Ciechanowski
[e-mail]

Instruction anual W-435 2/4
Thank you for choosing POLANIK landing area.
Contents
Chapter Page
I. General description 3
II. Technical specification 3
III. Preparing for first use 3
IV. Asse bly 3
V. Operating 4
VI. Maintenance 4
VII. Storing 4
VIII. Declaration 4

Instruction anual W-435 3/4
I. General description
POLANIK school landing area W-435 is top quality sports equip ent which is designed to secure ju pers and absorb
i pact energy of a ju per’s landing after take off and flight in high ju p training.
II. Technical specification
Code W-435
Di ensions length / width / height [ ] 4 / 3 / 0,5
Weight [kg] 126 kg
Nu ber of seg ents [pcs] 3
Spike resistant surface upper surface of top pad is equipped with spike resistant esh fabric
Seg ent covering PVC, ade of polyester with two vinyl layers
Internal structure advanced 3-layer construction, ade of high quality PUR foa
Way of seg ent linking stainless steel hooks and D-rings
Way of waterproof cover linking stainless steel D-rings
Carrying handles very strong jacquard webbing, fir ly attached by eans of envelope
stitching
III. Preparing for first use
The landing area ele ents are vacuu packed only for transport. Please unpack the i ediately after delivery and
leave the in a roofed place for few hours, so that they can return to their original shapes. Storing vacuum packed
landing area elements may cause permanent damages in their internal structures. When the landing area ele ents
return to their original di ensions, you can place the in high ju p field. The field surface should be even, s ooth and
without any obstacles. If you use the landing area outdoors, you should also provide: a special waterproof cover P-435 to
protect the landing area against unfavourable weather conditions and a odular platfor SW-4x3 to insulate the
landing area fro the ground.
IV. Assembly
It is done in the following way:
place the ain seg ents of the landing area in the high
ju p facility,
using the jacquard webbing belts and self-locking buckles
located on the seg ent sides fasten the seg ents to each
other,
place the top pad on the landing area ain seg ents,
then fasten the top pad to the ain seg ents using the
snap hooks and D-rings,
now the landing area is ready for use.

Instruction anual W-435 4/4
V. Operating
Stepping on the landing area and practising require special footwear designed for those purposes. Treading on the
landing area in footwear with spikes is only allowed when the landing area is equipped with special spike resistant
surface. Stepping on the landing areas in hard footwear or in shoes with heels is strongly prohibited. You ust not put
any tables, chairs, benches or any other objects whose unit pressure exceeds 1kg/1c
2
on the landing area. If the
landing area is oved fro one place to another very often, it is reco ended that a landing area cart should be used.
VI. Maintenance
Due to the hygiene require ents it is reco ended that the landing area should be cleaned regularly with co only
available detergents. Before you start wiping the landing area, please try to clean a s all spot on its botto side in
order to check the reaction with the PVC fabric.
VII. Storing
The landing area seg ents can be stored only in a horizontal position. They cannot be bent or pressed by any objects
during storing. That ay defor the seg ents per anently. A storing facility should be clean and dry. It ought to provide
in. te perature 5º C.
Even the best technical solutions cannot substitute for co on sense. The usage of the product ust take place under
the supervision of qualified coaches. The producer shall not be liable for any incidents caused by the i proper asse bly or
its isuse. The producer reserves the right to introduce without warning changes in product constructions and colours.
VIII. Declaration
1) No. 2010-04-12
2) Issuer’s na e: POLANIK Sp. z o. o.
Issuer’s address: Życzliwa 11, 97-300 Piotrkow Tryb.
3) Object of declaration:
4) The object of declaration described above is in confor ity with the require ents of the following docu ents:
Docu ent No. Title Edition/Date of issue Position
PN-EN 12503-2 Sports ats – Part 2: Pole vault and high
ju p ats, safety require ents April 2004 All above
Additional Infor ation
5) Declaration for:
BUYER and USER
Signed for and in behalf of:
POLANIK
2014-07-18 Piotrkow Tryb.
(Date and place of issue)
Pawel Ciechanowski
Product Manager
6) ……………………………………… ……………………………………………………………………………
(Na e, function) (Signature or equivalent authorized by the issuer)
Position
Description Code
1 High ju p school landing area 4 x 3 x 0,5 W- 35