Polanik PP16-S503 User manual

TECHNICAL SPECIFICATION
ASSEMBLY MANUAL
Training hurdles one-piece steel
with padded top bar
PP16-S503
File: 2017-07-26
TECHNICAL SUPPORT
Paweł Ciechanowski
p.ciechano[email protected]m

Technical specification/user manual PP16-S503 2/ 5
Thank you for choosing Polanik training hurdles
I. General description and use
Hurdles are designed for athletic training with a wide range of exercisers. Safe top bar with soft lining protects against
injuries and simple construction makes easy operation and maintenance.

Technical specification/user manual PP16-S503 3/ 5
II. Technical specification
Code
PP16-S503
Type
training, one-piece steel
Top bar
steel, with soft lining, length 1000 mm
Frame
steel, powder painted
Length L [mm]
1000
Inner length C
[mm]
880
Height. H [mm]
510
Inner height D
[mm]
470
Width B [mm]
575
Net weight [kg]
2,9

Technical specification/user manual PP16-S503 4/ 5
III. Assembly
The hurdles are delivered in one part and ready to use immediately
IV. Packing and transport
The hurdles are placed on pallets.
V. Remarks on operation and maintenance
Using hurdles on hard surface could damage powder coating and lead to corrosion. Losses in coating should completed
with lacquer.
The hurdles must be stored in a roofed and dry place. They do not require any special maintenance measures apart
from keeping them clean. Use commonly available cleaning agents. Before you start wiping the top bar covering, please
try to clean a small spot on its bottom side in order to check the reaction with the PVC fabric.
Even the best technical solutions cannot substitute for common sense. The usage of the product must take place under the supervision of qualified
coaches. The producer shall not be liable for any incidents caused by the improper assembly or its misuse. The producer reserves the right to introduce
without warning changes in product constructions and colours.

Technical specification/user manual PP16-S503 5/ 5
VI. Declaration
1)No. 2017-07-26
2)Issuer’s name: POLANIK
Issuer’s address: Życzliwa 11, 97-300 Piotrków Tryb.
3)Objects of declaration
4)Technical specification described above is in accordance with the factory’s internal engineering standards.
Additional Information
5)Declaration for:
Buyer/Distributor/User
Signed for and in behalf for:
POLANIK
2017-07-26 Piotrków Tryb.
(Date and place of issue)
Paweł Ciechanowski
Product Manager
6)……………………………………… ……………………………………………………………………………
(Name, function) (Signature or equivalent authorized by the issuer)
No.
Name
Code
1
Training hurdles one-piece steel with padded top bar
PP16-S503