Polar Bear PWD9800f User manual

PB-PWD9800f
Installation Manual
Issued: 02/11/2009
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).

PB-PWD9800f Installation Manual
Polar Bear Solutions Limited Warranty and Disclaimer
Polar Bear Solutions warrants its products to be free of defects in material and workmanship under normal use for one
(1) year from the date of purchase from Polar Bear Solutions, with the following exceptions:
•Unless otherwise specified, OEM and custom products are warranted for a period of one (1) year.
•Any products in which the serial number has been removed, defaced, or modified.
•Where any defect or failure is attributed to accident, misuse, abuse, negligence or non-observance
of the product user guide on the part of the installer, owner or user.
•Damage or defects caused by abnormal or unreasonable use (including unauthorised system
modifications, repairs, and specifically, alterations by a person or party other than Polar Bear
Solutions or their authorised agents).
•Damage or defects resulting from acts of nature, such as lightning strikes or floods.
•POLAR BEAR SOLUTIONS Software is warranted for a period of ninety (90) days.
This warranty extends only to products purchased directly from POLAR BEAR SOLUTIONS or an Authorised POLAR
BEAR SOLUTIONS Dealer within their authorised territory.
All products returned to POLAR BEAR SOLUTIONS require a Return Material Authorisation (RMA) number. The RMA
number is obtained from the POLAR BEAR SOLUTIONS RMA Department. The RMA number must be clearly marked on
the outside of each box. The RMA is valid for a 30-day period. After the 30-day period the RMA will be cancelled. Any
shipments received not consistent with the RMA, or after the RMA is cancelled, will be refused. POLAR BEAR
SOLUTIONS is not responsible for products returned without a valid RMA number. Products purchased from an
authorised POLAR BEAR SOLUTIONS dealer should be returned via that dealer.
POLAR BEAR SOLUTIONS is not liable for any damages caused by its products or for the failure of its products to
perform. This includes any lost profits, lost savings, incidental damages, or consequential damages. POLAR BEAR
SOLUTIONS is not liable for any claim made by a third party or by a POLAR BEAR SOLUTIONS Dealer for a third party.
This limitation of liability applies whether damages are sought, or a claim is made, under this warranty or as a tort claim
(including negligence and strict product liability), a contract claim, or any other claim. This limitation of liability cannot be
waived or amended by any person. This limitation of liability will be effective even if POLAR BEAR SOLUTIONS or an
authorised representative of POLAR BEAR SOLUTIONS has been advised of the possibility of any such damages. This
limitation of liability, however, will not apply to claims for personal injury.
Under no circumstances shall Polar Bear Solutions be liable by virtue of this warranty or otherwise for any special,
indirect, secondary or consequential damages of any nature arising out of any use or inability to use the home
entertainment/communications system.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, POLAR BEAR SOLUTIONS MAKES NO OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. POLAR BEAR SOLUTIONS EXPRESSLY DISCLAIMS ALL
WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED
BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY.
HOT SURFACES WARNING
During operation the back box can get hot. Sufficient care should be taken when handling or removing the
product after operation. It is recommended that an appropriate amount of time is left after the unit powered
off to allow the back box to cool down. Lower input voltages decrease the heat of the unit.
INSTALLATION COMPETENCE
This product is not intended to be installed by the general public or other un-trained personnel. The product
should only be installed by trained individuals that have a minimum level of CEDIA qualification or other
equivalent qualifications within the custom audio visual installation industry. Installation that is not carried out
correctly may invalidate the warranty.
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).

PB-PWD9800f Installation Manual
Table of contents
Polar Bear Solutions Limited Warranty and Disclaimer ...................................................................2
HOT SURFACES WARNING..............................................................................................................2
INSTALLATION COMPETENCE.........................................................................................................2
Table of contents.............................................................................................................................3
Overview..........................................................................................................................................4
What’s included...............................................................................................................................4
Back Box Installation....................................................................................................................... 4
Installation.......................................................................................................................................4
Power Supply...................................................................................................................................7
Wired Ethernet ................................................................................................................................7
Tech Specification: ..........................................................................................................................7
Contact: Polar Bear Solutions Ltd............................................................................................7
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).

PB-PWD9800f Installation Manual
Overview
The wall docking station is a flush mount in-wall dock that allows the Philips TSU9800 control panel to be
securely fixed flush in the wall. This allows the control panel to use the wired Ethernet socket on the back of
the TSU9800 for reliable communications.
The PWD9800f docking station comes in two parts, the wall back box and the control panel caddy / frame.
What’s included
The following items should be included in the PB-PWD9800f product.
1. Back box
2. Caddy
3. Frame
4. USB Adapter cable
5. Caddy / TSU9800 Screws (No2. x 6mm Self tapping)
6. Caddy / Back Box Screws (M3 x 12mm Machine Screw)
7. Torx 6 drive adapter
8. Reset Stylus
Back Box Installation
The back box should be installed into a wall securely using the fixing holes. The front of the back box should
sit flush with the finished wall; otherwise longer M3 securing screws may be required to attach the caddy to
the back box.
Installation
The PWD9800f caddy is fitted to the back of the TSU9800 to form a secure mounting base for the control
panel to be then fitted into the wall. Take the TSU9800 and place it face down on a clean soft surface, on the
back remove the four rubber bungs located on the rear of the TSU9800 control panel. Also remove the label
to reveal the Ethernet and power connector.
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).

PB-PWD9800f Installation Manual
Once the rubber bungs have been removed they will reveal access to four small Torx 6 screws. These
screws should be carefully removed. A suitable Torx adapter bit has been included in the product for
convenience. Once these screws have been removed, place the PB-PWD9800f caddy over the back of the
TSU9800 and secure in place with the new screws provided. The caddy has a small amount of movement to
allow for aligning the front frame.
The USB extension cable can now be fitted as shown. This essentially extends the USB port to the front of
the unit to allow the TSU9800 to be kept in the wall during programming or firmware updates.
Once the TSU9800 is screwed to the Caddy the front bezel should be clipped on to test the TSU9800 is aligned correctly
before screwing into the wall. Press firmly in the areas shown so
the frame sits snugly around the TSU9800. Make any suitable
adjustments and then remove the front bezel for attachment to the
back box. Care should be taken when removing the front frame.
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).

PB-PWD9800f Installation Manual
Offer the TSU9800 and caddy assembly up to the in-wall back box . When fixing the caddy assembly to the back box,
use the M3 screws provided and use the hole locations shown in the image below. Care should be taken in not over
tightening the caddy into the wall as this could distort the product.
Once the caddy is secured in the wall the frame can be clipped in place. The reset stylus can be used to reset the
TSU9800 if required without needing to remove the controller from the wall.
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).

PB-PWD9800f Installation Manual
Power Supply
A suitable 5v DC power supply should be used to power and charge the TSU9800 when in the wall. When
installing cabling within a building, it is essential that the correct size cable is used to cope with voltage drop
and suitably protected by either a fuse or other appropriate means in accordance with relevant low voltage
guidelines for your country. If a Philips TSU9800 is suspected to have a faulty battery or problem, do not
install the touch screen panel in the wall. Failure to meet these specifications may cause permanent damage
to the wall dock product.
Wired Ethernet
When using the TSU9800 it is possible to use the fixed wired Ethernet connection on the back of the
TSU9800. To use the wired Ethernet interface refer to the TSU9800 programming guide for further
information. Ensure that a suitable Ethernet cable is installed in the property and terminated with an RJ45
Plug.
Tech Specification:
Power input requirement: 5v DC 2Amps (at point of entry to the TSU9800)
Colour: Silver
Back Box Size: 242 x 168 x 62mm (W x H x D)
Product size on wall: 250 x 176.5mm (W x H)
Contact: Polar Bear Solutions Ltd
Web site: http://www.PolarBearSolutions.com/
Email: [e-mail]
Polar Bear Solutions reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the Instruction Manual(s) associated with your Product(s).